Instruction/ maintenance manual of the product 308 NEC
Go to page of 12
Dial Codes for Phones Using Dial Plan 1 Features not listed here work as previously described. Note: Used when Automatic Line Access uses “0” or “9” to seize a line. Lift handset + 63 + Extension to receive call + Forwarding code (0-3) + Hang up.
Placing an Outside Call . . . The instructions in this guide assume your system uses default program settings (e.g. Dial Plan 2). 1. Lift handset. 2. Press 3. Dial a 2-digit outside line number (e.g., 01, 02). 4. Dial outside number. • If your system is behind a PBX, you may have to dial 9 before your number.
1. Lift handset. 2. Press . 3. Dial Personal Code (4 digits). 4. Hang up. If your call doesn’t go through . . . Camp On and Callback 1. For Intercom calls, dial to Camp On (wait without hanging up). OR 1. For Intercom calls, dial and hang up to leave a Callback for an extension.
Message Waiting 1. Do not hang up if there is no answer. 2. Press . • MW on your co-worker’s multibutton phone flashes fast. 3. Hang up. A Message Waiting is indicated by a moderate busy-type signal when the handset is first lifted. 1. Lift handset.
1. Lift handset. 2. Dial a Page Zone (Portrait 308 = 80-85; Portrait 824 = 80-87). 3. Announce co-worker to pick up the same page zone number you dialed. 4. Press . 5. Do not hang up. Wait for party to join in the conversation. 1. Lift handset. 2. Press .
Y our call can wait at your phone . . . Hold 1. Do not hang up. 2. Press the hookswitch. 3. System Hold: Dial . • Your co-workers can take the call off Hold. OR 3. Exclusive Hold: Dial . • Your co-workers can not take the call off Hold. 1. Lift handset.
Forward your calls to a co-worker . . . When Call Forward is activated, it’s indicat- ed by a slow busy-type signal when the hand- set is first lifted. 1. Lift handset. 2. Press . 3. Dial extension to receive your calls. 4. Dial one of the following: • 0 to forward all calls.
Automatically redial calls . . . Last Number Redial This feature may require system programming. 1. Lift handset. 2. Press and dial queue group number (1-6). OR 2. With software version 2.1 or higher, press . Speed Dial This feature may require system programming.
Possible Dial Codes for Dial Plan 2 Phones The following features may have dial code changes which could apply to your phone if system programming was altered. Ask your communica- tions manager if these codes apply to you. Features not listed here work as previously described.
Dial Codes for Phones Using Dial Plan 1 Features not listed here work as previously described. Note: Used when Automatic Line Access uses “0” or “9” to seize a line. Lift handset + 63 + Extension to receive call + Forwarding code (0-3) + Hang up.
Tones you may hear . . . Lift handset + 07 + Security Code + Line Access Code + Phone number. Walking Class of Service: Quick Reference for Other Features Seize CO line + Hookswitch + 99 + Account Code + Hookswitch + Telephone number. Account Code: This means you made a mistake in placing a call or using a feature.
Forward your calls to a co-worker . . . When Call Forward is activated, it’s indicat- ed by a slow busy-type signal when the hand- set is first lifted. 1. Lift handset. 2. Press . 3. Dial extension to receive your calls. 4. Dial one of the following: • 0 to forward all calls.
An important point after buying a device NEC 308 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC 308 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC 308 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC 308 you will learn all the available features of the product, as well as information on its operation. The information that you get NEC 308 will certainly help you make a decision on the purchase.
If you already are a holder of NEC 308, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC 308.
However, one of the most important roles played by the user manual is to help in solving problems with NEC 308. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC 308 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
