Instruction/ maintenance manual of the product SHC68-H1X38 National Instruments
Go to page of 8
USER GUIDE Digital Flying Lead Cable Accessor y for Single-Ended NI Digi tal W aveform Generator/Analyzers The NI SHC68-H1X38 cable is a singl e-ended cable that breaks out each NI digital wav eform generator/analyzer signal in to two 0.1 inch header receptacles, one receptacle each for the signal and ground.
Digital Flying Lead Cable User Guide 2 ni.com What Y ou Need to Get Started To set up and use the NI SHC68-H1X38 cable, you need the following items: ❑ Compatible NI digi tal wav eform gene rator/an.
© National Instruments Corporation 3 Di gital Flying Lead Cable User Guide Parts Locator Refer to Figure 1 to locate connectors and comp onents on the NI SHC68-H1X38 cable.
Digital Flying Lead Cable User Guide 4 ni.com Figure 2. Detailed Parts Loc ator Diagram for the Lead Pairs Connecting Signals Each DIO, PFI, and clock channel of the NI digital waveform generator/analyzer connects to a co rresponding pair of leads on the NI SHC68-H1X38 cable.
© National Instruments Corporation 5 Di gital Flying Lead Cable User Guide CLK OUT / PFI 4 For de vices that have a DDC CLK OUT channel, this signal is the exported sample clock signal. Otherwise, th is is PFI 4. Bundle A PFI <1..3> Programmable functional interface PFI <1.
Digital Flying Lead Cable User Guide 6 ni.com Using Y our Accessor y The NI SCH68-H1X38 cable breaks out every signal through a 50 Ω characteristic impedance microcoaxial cable, which is then split into the two leads with receptacles.
© National Instruments Corporation 7 Di gital Flying Lead Cable User Guide Specifications Digital I/O DIO Channels .................... ..................... 32, single-ended Control I/O Channels ........... .................. 6, single-ended Typical Propagation delay .
National Instruments, NI, ni.com, and LabVIEW are tradem arks of National Instruments Corporation. Refer to t he Terms of U se section on ni.com/legal for more in formation abou t National Instruments trademarks. Other product and compan y names mentioned herein are trademarks or trade names of their respective companie s.
An important point after buying a device National Instruments SHC68-H1X38 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought National Instruments SHC68-H1X38 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data National Instruments SHC68-H1X38 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, National Instruments SHC68-H1X38 you will learn all the available features of the product, as well as information on its operation. The information that you get National Instruments SHC68-H1X38 will certainly help you make a decision on the purchase.
If you already are a holder of National Instruments SHC68-H1X38, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime National Instruments SHC68-H1X38.
However, one of the most important roles played by the user manual is to help in solving problems with National Instruments SHC68-H1X38. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device National Instruments SHC68-H1X38 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center