Instruction/ maintenance manual of the product SCIX-1371 National Instruments
Go to page of 3
SCXI ™ is a trademark of National Instruments Corporation. Product and company names are trademarks or trade names of their respective companies. 3 71195A -0 1 © Copyright 1994, 1997 National Instruments Corp.
2 Installation Refer to Figure 1 as you perform steps 1-4. The rack-mount bracket with the longer side panel can be mounted on either side of the SCXI chassis. Both rack-mount brackets can be mounted in one of six positions to attain different depths.
3 1. Turn off the SCXI-1000, SCXI 1000DC, or SCXI-2000 chassis power. 2. Use the 6-32 hex nuts (item 7) and no. 6 lockwashers (item 5) to attach the brace (item 6) to the rack-mount bracket with the longer side panel (item 1). 3. Using the four 8-32 screws (item 2), attach the rack-mount brackets (items 1 and 4) to your SCXI chassis.
An important point after buying a device National Instruments SCIX-1371 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought National Instruments SCIX-1371 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data National Instruments SCIX-1371 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, National Instruments SCIX-1371 you will learn all the available features of the product, as well as information on its operation. The information that you get National Instruments SCIX-1371 will certainly help you make a decision on the purchase.
If you already are a holder of National Instruments SCIX-1371, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime National Instruments SCIX-1371.
However, one of the most important roles played by the user manual is to help in solving problems with National Instruments SCIX-1371. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device National Instruments SCIX-1371 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
