Instruction/ maintenance manual of the product NI PXIe-8106 National Instruments
Go to page of 4
INSTALLATION GUIDE NI PXIe-8106 This document contain s information ab out installing yo ur NI PXIe-8106 controller in a PXI Express chassi s. F or complete configuration and troubleshooting inform ation (including informat ion about BIOS setup, adding RAM, etc.
NI PXIe-8106 Installation Guide 2 ni.com Figure 1. Removing Protective Screw Caps Caution Do not raise the injector/ejector handle as you insert the NI PXIe-8106. The module will no t insert properly unless the handle i s in its downward position so that it does not interfere with th e inj ector rail on the chassis.
© National Instruments Corporation 3 NI PXIe-8106 Installation Guide Figure 2 shows an NI PXIe-8 106 controller instal led in the system controller slot of a National Instruments NI PXIe-1062Q chassis. Y ou can place PXI-1 or PXI Express de vices in other slots.
National Instruments, NI, ni.com, and LabVIEW are tradem arks of National Instruments Corporation. Refer to t he Terms of Use section on ni.com/legal for more information abou t National Instruments trademarks. Other product and compan y names mentioned herein are trademarks or trade names of their respective companie s.
An important point after buying a device National Instruments NI PXIe-8106 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought National Instruments NI PXIe-8106 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data National Instruments NI PXIe-8106 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, National Instruments NI PXIe-8106 you will learn all the available features of the product, as well as information on its operation. The information that you get National Instruments NI PXIe-8106 will certainly help you make a decision on the purchase.
If you already are a holder of National Instruments NI PXIe-8106, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime National Instruments NI PXIe-8106.
However, one of the most important roles played by the user manual is to help in solving problems with National Instruments NI PXIe-8106. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device National Instruments NI PXIe-8106 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
