Instruction/ maintenance manual of the product NZ-26 Napoleon Fireplaces
Go to page of 24
W415-0676 / 03.14.08 1 $10.00 W415-0676 / 03.14.08 INSTALLATION AND OPERATING INSTRUCTIONS Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 4Y8 Canada / 103 Miller Drive, Crittenden, Kentuck y , USA, 41030 (705)721-1212 • fax(705)722-6031 • www .
W415-0676 / 03.14.08 2 WARNINGS AND SAFETY PRECA UTIONS ! INTR ODUCTION NorthlineExpress.com http://www.northlineexpress.com Toll-Free 1-866-667-8454.
W415-0676 / 03.14.08 3 Congratulations on the purchase of your hi-tech, high effi ciency solid fuel burning fi replace! It has been extensively tested in Canadian and American laboratories .
W415-0676 / 03.14.08 4 NAPOLEON® products ar e manufactur ed under t he strict Standar d of the W orld Recognized ISO 9001 : 2000 Quality Assurance Certificate. NAPOLEON® products ar e designed wit h superior components and materials, assembled b y trained craftsmen who take great pride in their work.
W415-0676 / 03.14.08 5 FIGURE 2 ! W ARNING This fi replace and its components are designed to be installed and operated as a system. Any alteration to or substitution for items in this system, unless allowed by these installation instructions, will void the W arnock Hersey , listing and may void the product war- ranty .
W415-0676 / 03.14.08 6 This is the most effi cient, simple and trouble free woodburning system we know of and works as follows: Primary combustion air enters through the air control inlet box regulat.
W415-0676 / 03.14.08 7 T o operate this hi-effi ciency fi replace as a basic system, the blower is not required, however , to enhance its effi ciency a blower is rec- ommended. A BLOWER KIT (NZ62) This blower is installed in the bottom of the unit and used to direct the heat into the room where the fi replace is lo- cated.
W415-0676 / 03.14.08 8 INST ALLA TION / FRAMING Do not build shelves or cupboards into the area abov e the fi replace. While the fi replace can be installed directly on the fl oor, a non- combustib.
W415-0676 / 03.14.08 9 FIGURE 7c: Finishing Requirements The fi replace should be framed using 2x4 lumber . For the header and cripple studs above the fi replace it is recommended to use steel. The fi replace must be secured to the fl oor in all cases.
W415-0676 / 03.14.08 10 12” MAXIMUM 12” MAXIMUM Minimum 40 square inches of ventilation opening required, both at the top and bottom of the enclosure. V en ti la t ion openings are required in en clo sur es up t o 8 4” hi gh. They are recommended for all enclosures.
W415-0676 / 03.14.08 11 Model NZ-26 has the option of taking outside air directly into the fi replace through the opening on the left hand side or taking inside air through the lower front louvres or a combination of both.
W415-0676 / 03.14.08 12 1. Move the fi replace into position. T ry to centre the exhaust fl ue of the fi replace, midpoint between two joists to prevent having to cut them.
W415-0676 / 03.14.08 13 IF THE CHIMNEY IS UNLINED: A stainless steel liner listed to either Standard ULC- S640M, ULC-S639 in Canada or UL-1777 in the USA: Liners for New Masonry Chimneys, may be used to connect the fireplace to the chimney .
W415-0676 / 03.14.08 14 Attach the handle as shown so that when the door is closed, the handle will be centred in the slot located on the fi replace front. T o achieve this you may have to experiment (on the upper and lower screws) with one of the variations shown.
W415-0676 / 03.14.08 15 TOP FLAME SPREADER BOTTOM FLAME SPREADER FIBRE BAFFLES TOP FIBREBRICKS TUBE BURNERS GASKET LEFT SIDE FIBREBRICK RIGHT SIDE FIBREBRICK REAR FIBREBRICKS GASKET RIGHT FRONT FIBREB.
W415-0676 / 03.14.08 16 FIGURE 34 1. Turn of f any electrical power to the fi replace (if applicable). Open the lower louvred control door . 2. Locate the vibration reducing pad over the two threaded studs, piercing 2 holes into the pad. The fan must be installed on the left hand side of the fi replace entirely on the pad.
W415-0676 / 03.14.08 17 FUEL LO ADING AND B URN CY CLE Remove all source of gasoline or other fl ammable vapours and liquids in the vicinity of this or other appliances prior to light- ing. Ensure that the top fi rebricks and fi bre baffl es are in place and not lifted up.
W415-0676 / 03.14.08 18 A bed of ashes approximately 1" deep should be left on the fi rebox bottom to help maintain a hot charcoal bed. When the fi re has burned down and cooled, remove any excess ashes. T o use your ash pan, pull the ash dump handle forward to an open position.
W415-0676 / 03.14.08 19 # P ART NO. DESCRIPTION 1 W010-0243 ASH P AN WITH LID 2 W325-0028 ASH P AN HANDLE 3 W090-0044 RIGHT FRONT FIREBRICK 4 W090-0045 LEFT FRONT FIREBRICK 5 W090-0039 REAR FIREBRICK .
W415-0676 / 03.14.08 20 NorthlineExpress.com http://www.northlineexpress.com Toll-Free 1-866-667-8454.
W415-0676 / 03.14.08 21 BUILD YOUR FIRE ON THE FLOOR OF THE FIREBOX AND BE- HIND THE LOG RET AINER ONL Y . Do not block or restrict the hot air outlets or air inlets. This will cause the fi replace to overheat. Keep fi res away from the door . 1. Build a hot fi re.
W415-0676 / 03.14.08 22 W olf Steel Fir eplace Ser vice Histor y This fireplace must be serviced annually depending on usage. Date Service T echnician Name Service Performed Special Concerns Dealer Name NorthlineExpress.com http://www.northlineexpress.
W415-0676 / 03.14.08 23 NO TES NorthlineExpress.com http://www.northlineexpress.com Toll-Free 1-866-667-8454.
W415-0676 / 03.14.08 24 NO TES NorthlineExpress.com http://www.northlineexpress.com Toll-Free 1-866-667-8454.
An important point after buying a device Napoleon Fireplaces NZ-26 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Napoleon Fireplaces NZ-26 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Napoleon Fireplaces NZ-26 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Napoleon Fireplaces NZ-26 you will learn all the available features of the product, as well as information on its operation. The information that you get Napoleon Fireplaces NZ-26 will certainly help you make a decision on the purchase.
If you already are a holder of Napoleon Fireplaces NZ-26, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Napoleon Fireplaces NZ-26.
However, one of the most important roles played by the user manual is to help in solving problems with Napoleon Fireplaces NZ-26. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Napoleon Fireplaces NZ-26 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
