Instruction/ maintenance manual of the product GEM-P3200 Napco Security Technologies
Go to page of 68
HARDWIRE WIRELESS GEM-P3200 CONTROL P ANEL/COMMUNICA T OR Programming the GEM-P3200 Control Panel with the "Classic" GEM- RP1CAe2 Keypad and the "K Series" GEM-K1C A Keypad WI818G 10/05 © NAPCO 2005 Quick Start (for "Classic" GEM-RP1CAe2) 1.
THIS MANUA L INCLUDES FEA TURES WHICH ARE O NLY A V A IL ABLE IN CON TROL PA NEL FIRMWARE VE RSION 50 OR LA TER. IMPORT A NT NOTE This manual supports the keyp ad programming of the GEM-P3200 control panel with the NAPCO "classic" GEM- RP1CAe2 keypad as well as the GEM-K1CA "K Series" keyp ad.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 3 W I818G 10/05 IMPOR T A NT NOT E ................................ ...................... 2 CHA NGES FROM PR EVIOUS E DITION ..................... 2 SYSTEM PRO GR A MMING OPTI ONS .
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 4 WI818G 10/0 5 SY STEM PROGRAMMING OPTIONS INTR OD UC TIO N The GEM-P32 00 control panel m ay be prog rammed by vario us mean s, each of w hich will be covered in d etail in the sec tions that follow .
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 5 W I818G 10/05 EASY MENU DRIVEN PROGRAM MODE EASY MENU DRIVEN PROGRA M MO DE DEALER PROGRAM - PRELIMINARY INFORM ATION Only Ke ypad #1 m ay be used f or both dealer and us er progra mming, however t his keypa d may be located in any area.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 6 WI818G 10/0 5 GEM-RP 1CAe2/ GEM-K1CA Ke ypad Easy Pr ogram Menu T o create a c ustom prog ram using the GEM-RP1CAe2/GE M-K1CA k eypad, sim ply answer the f ollowi ng question s and re- cord your information on the Easy Menu Programmi ng Workshe et .
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 7 W I818G 10/05 GEM-RP1 C A E2/GEM-K1CA KE YPAD EASY PROGRA M MENU Chime 2 Zon e s in Area 1 (New Program Only) • Enter the zone numbers which are to be used as Chime 2 Zones. • Valid entri es are f rom 01 to 4 8.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 8 WI818G 10/0 5 GEM-RP1CA E2 /GEM-K1CA KE YPAD EA SY PROGRAM MENU Enable SIA CP-01 Features? • Press the NEXT/YES button to enable. • Press the PRIOR/NO button to continue. The SIA CP-01 Features are designed to reduce the inci dence of false alarms.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 9 W I818G 10/05 Central Station Recei ver 1 A ccount Number • Enter an account number of up to f our digits. • Press 0 through 9 for digits 0–9, and G 0 for a blank ( • ).
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 10 WI818G 10 /05 Enter User Codes (Press the R button to set cursor.) Enter up to 48 User Codes with User Options, Authority Lev el and Access Control Options (if necessary ) fo r each code.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 11 W I818G 10/05 Press U to save each code. To proceed to the next User Code, set the cursor to the User Number and change it using the number buttons. Program a new User Code as previously described.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 12 WI818G 10 /05 GEM-RP1CA E2 /GEM-K1CA KE YPAD EA SY PROGRAM MENU Enter Proximity Card Users (FOR ACM USE ONLY). (Press the R button to set cursor). See WI1221 for more information.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 13 W I818G 10/05 RF Transmitter Points (Press R to set cursor.) For each transmitter enter: (For wireless systems only. Also se e Quick Method, which follows) • The zone number (01–48) to which the transmitter will be mapped.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 14 WI818G 10 /05 KeyFob Tra nsmitters a s Zone Input De vices (Refer to display above: press the PRIOR button to go back wards). Each of the 4 keyfob buttons c an be assigned to a zone.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 15 W I818G 10/05 DIR ECT A DDRE SS OVER V IEW Direct Address Programming allows you to go directl y to th e address locations (up to 4095) and change the da ta entries manually in orde r to cust omize your control panel options.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 16 WI818G 10 /05 PROGRAM THE DATA ENTRIES 1. Enter the panel's Dealer Security Code, then pres s R . 2. Ans wer NO to all qu estions until “ ACTIV ATE P ROGRA M Y/N ” i s d is played; then press YES.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 17 W I818G 10/05 DIRECT A DDRESS PROGRAM M ODE advance to the data field. 5. Press 015 . The numbers 015 will appear on the k eypad display indicat ing the nu mber of seconds entered.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 18 WI818G 10 /05 DIRECT A DDRE SS PROGR AM MO DE PROGRAM THE DATA ENTRIES 1. Enter the panel 's Deale r Security Cod e, then press R . 2. Ans wer NO to all questio ns until “ ACTI VA TE P RO GRA M Y /N ” is displayed; then pr ess YES.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 19 W I818G 10/05 SYSTEM DELAYS & TIMEOUTS (ADDRESS 0000-0002, 2402, 2406, 2414 & 3902) SYSTEM DELAYS & TIM EOUTS (ADDRESS 2407, 2408 & 4088) SYSTEM DEL A Y S/TIMEOUTS EXIT ADDRESS 0000 DELAY (sec.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 20 WI818G 10 /05 [Default = blank (•) blank (•) f rom address 0490-0492] SYSTEM DELAYS & TIMEOU TS (ADDRESS 24 00, 2401.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 21 W I818G 10/05 ADDRESS 0525 CS Receiver 1 Format ADDRESS 0550 CS Receiver 2 Format Default for C S Receiver 1 Form at depends on Easy M en u Question “R C VR FORMA T ”. [Default = •(blank) E] for CS Receiver s 1, 2 and 3 Formats .
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 22 WI818G 10 /05 CS Receiver 1 Tele phone Number (Digits 1-20) ADDRESS 052 7-0546 (DIGITS 1-20) 0527 0528 0529 0530 0531 0532 0.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 23 W I818G 10/05 CS SUBSCRIBER ID NUMBERS (ADDRESS 0650 -0787) CS SUBSCRIBER ID NUMBERS (TELCO 1 & 2) AREA 1 ADDRESS 0650-06.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 24 WI818G 10 /05 CS REPORTING CODES (ADDRESS 0859- 0883) LEFT ADDR RIGHT blank (•) 0859 blank (•) 0860 blank (•) 0861 bla.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 25 W I818G 10/05 CS SYSTEM REPORTING C ODES: 1. Enter in corr esponding addres s lo c ation (left and right digits ). NOTE: L eft digit is the first digit an d righ t digit is t he second digit in a tw o digit CS receiver format .
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 26 WI818G 10 /05 ADDRESS 09 10-0917 ZONES REPORT CODE (CONTROL PANEL) ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 ZONE 8 0.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 27 W I818G 10/05 CS USER REPORTING C ODES (ADDRESS 10 30-1074) NOTE: These opening events w ill report as the user numbe r shown. Also, Ke yfobs 1-8 (see Eas y Menu Program Driven Mode) w ill report as Users 25-32, respectively.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 28 WI818G 10 /05 GLOBAL SYSTEM EVENT/TROUBLE SYSTEM RESPONSE ACTIVATED BY GLOBAL EVENT/TROUBLE ADDR TEST TIM ER ALARM SUPERV. COMM. BUS 1 MEMORY FAILU RE LOW BATTE RY AC FAIL EZM TAMPER SENSOR WAT CH 1 2 3 4 5 6 7 8 Burglary Alarm Output 1082 Pulsed Burg.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 29 W I818G 10/05 AREA SYSTEM TROUBLE REPORTING OPTIONS AREA SYSTEM TROUBLE R EPORTING OPTIONS (ADDRESS 1120-1 137) 1. Select the desired option entering the option number (1-8) for each digit.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 30 WI818G 10 /05 ZONES 1 8 ZONES 9 16 ZONE OPTIONS ADDR Z1 Z2 Z3 Z4 Z5 Z6 Z7 Z8 ADDR Z9 Z10 Z11 Z12 Z13 Z14 Z15 Z16 1 2.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 31 W I818G 10/05 ZONE OPTIONS / ZONES 17-32 (ADDRESS 1402 -1586) ZONE OPTIONS / ZONES 17-32 ZONES 17 24 ZONES 25 32 ZONE.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 32 WI818G 10 /05 ZONE OPTIONS / ZONES 33-48 (ADDRESS 1602-17 86) ZONE OPTIONS / ZONES 33-48 ZONES 33 40 ZONES 41 48 ZON.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 33 W I818G 10/05 NOTES: (A) 50ms & 20 ms Loop Response only available for zones 1-8. (B) 2-wire Smoke Detectors only av ail able for zones 1-8. Refer to Instal lation Instr uctions (W I817) for more details.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 34 WI818G 10 /05 SYSTEM OPTIONS (ADDRESS 2415-2419) SYSTEM OPTIONS 2417 System Options 2418 Sy stem O ption s Default Option Default Option OFF 1 Openi ng Re port onl y aft er A lar m Rep ort OFF 1 Auto Bell Test on Arming OFF 2 Cl osi ng Re port onl y on Cond .
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 35 W I818G 10/05 SYSTEM OPTIONS (ADDRES S 2420-2422, 387 4, 3905, 3880-3881) SYSTEM OPTIONS 3905 Sys tem Option s Default Option.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 36 WI818G 10 /05 [Default = blank (•) blank (•)] LEFT DI GIT ( SUM OF DA TA VALUES) RIGHT DIGIT (SUM OF DATA VALUES) blank .
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 37 W I818G 10/05 RIGHT blank (•) 1 2 OPTION Not Used Area 1 Area 2 KEYPAD AREA ASSIGNMENT KEYPAD OPTIONS (ADDRESS 2425-2446) K.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 38 WI818G 10 /05 AC M O P TI O N S ACM ZONE OPTIONS ( ADDRESS 2740-2769) ACM GLOBAL FLAGS (ADDRESS 278 0) ACM TIMEO UTS (ADDRESS 2782-2783) ACM ZONE OP TIONS: Enter the Zone numbers (in decimal 1-48 f ormat) for each option in the table below.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 39 W I818G 10/05 AC M O P T I O NS ACM DOOR AREA OPTION S (ADDRESS 2784-2787) ACM SCHEDULED FREE ACCESS (ADDRESS 4072-4075) ACM Door Number ADDR ACM DOOR AREA OPTIONS Arm All Areas All owed Disarm All Areas All owed Stealth Mode RSR V D.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 40 WI818G 10 /05 AC M O P TI O N S ACM ZONE OPTIONS: Enter the Zone numbers (in two-digit hexadec imal format) for each option in the table below. The left digit (nibbl e) determines the type of device: " ● " for Keypad and "1" for ACM .
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 41 W I818G 10/05 SYSTEM OPTIONS (ADDRESS 2423) SYSTEM OPTION: 1. Select the System Option from the table shown and enter in the corresponding address location at right.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 42 WI818G 10 /05 [Default = blank (•) blank (•) f rom address 2471-2502 Default = blank (•) 1 from address 2455-2462 Defa.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 43 W I818G 10/05 EZM GROUP OPTIONS ( ADDRE SS 2555-2576) Default depends on Easy Menu questions: " # OF Z NS IN AREA1 " and " # OF Z NS IN AREA2 " For example, If 32 zones are used, then all 6 groups will be automatically enabled.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 44 WI818G 10 /05 AREA ARMING OPTIONS ( ADDRE SS 2650-2651) PRIORITY AREA ARMING: 1. Select the desired arming area. 2. Ent er the corresponding Area number in each the addr es s location, in Binary (Bit) Format.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 45 W I818G 10/05 AREA OUTPUT CONTROL OP TIONS (ADDRES S 2700-2739) AREA O UTPUT TU RNS O FF UPON DI SA RM: Select options for any of the 5 Outpu t s per area when disarming a particular area.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 46 WI818G 10 /05 RF RECEIVERS & SUPERVISORY TIMER OPTIONS (ADDRESS 3776 & 3760-3775) RF RECE IVERS: Up to 2 RF Re ceivers may be programme d. NOTE: This adds wireless capability to the s ystem, increasing up to 48 the number of zones.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 47 W I818G 10/05 EXTERNAL RELAY CONTROL / RELAYS 1-24 (ADDRESS 3778-380 1 & 2800-2895) ADDRESS 3778 & 2800 -2803 (RELAY/.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 48 WI818G 10 /05 EXTERNAL RELA Y CONTROL EXTERNAL RELAY CONTR OL STEP 2: AR EA OPTIO NS: Each relay/entry can be assign ed to Area 1 or 2 or both areas.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 49 W I818G 10/05 EXTERNAL RELA Y CONTROL EXTERNAL RELAY CONTROL For a desir ed re lay not l ist ed: A.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 50 WI818G 10 /05 EXTERNAL RELA Y CONTROL STEP 4: EVENT I D CODES: Each relay ev ent ca n be a ssign ed any of the availa ble event IDs f rom the tabl e.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 51 W I818G 10/05 EXTERNAL RELA Y CONTROL NUMBER OF RELAY BOARD MODULES (ADDRESS 3777) [Default = blank (•) blan k (•)] LEFT .
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 52 WI818G 10 /05 DIRECT A DDRE SS PROGRAM MODE--USER PROGR AM MODE USER PROGRAM MODE PREL IMIN ARY INFORM ATION The User Program Mode is covered in detail in the operating instructi ons for the keypad in use.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 53 W I818G 10/05 ACCE SS ING US ER PR OG RAM MO DE 1. Press EEEEEE R 2. Press Q Until “ ACTIVA TE PROG RAM Y/N ” appears on LCD screen. 3. Press P To Enter User Program Mode 4.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 54 WI818G 10 /05 ZONE DE SCRIPTIO NS (GEM-RP1C AE2 / GE M-K1CA KE YPADS) Ent er an i dentifying descri ption for each zone. Characte rs are se lected by pressing keypad buttons multipl e times, "Cell Phone" sty le.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 55 W I818G 10/05 KEYP AD CONFIGURA TION MODE This sectio n will focus on configuring the GEM-RP1CAe2/GEM-K1CA Keypads. If there is more than one keypad in the system, only Keypad No.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 56 WI818G 10 /05 Compat ibili ty Nu mber A 4-digit Compatibility Number, if program med, will restrict this key pad to work on a panel programmed with a matching number. 1. Enter a 4-digit number 2.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 57 W I818G 10/05 ALPHABETICAL INDEX ABORT DELAY ADDRESS 2406, 19 ABORT DELAY ZONE OPTION, 30, 31, 32 AC FAIL REPORT DELAY AD DRESS 2408, 19 ACCESS CO NTROL (PANEL) O N AUX.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 58 WI818G 10 /05 ALPHABETICAL INDEX (CONT'D) DIALING—ROTARY O R TOUCH-TONE, 25 DIGITAL D I ALER RPT ENTER/EXIT TEST MODE.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 59 W I818G 10/05 ALPHABETICAL INDEX (CONT'D) 1400HZ HANDSHA KE/KISSOFF AD DR ESS 0576, 21 FUNCTION MODE , 4 GEM-RP1CAE2 /GE.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 60 WI818G 10 /05 ALPHABETICAL INDEX (CONT'D) RPT TROUBLE RESTORE TEL 1 Z ONE OPTION, 30, 31, 32 RPT TROUBLE RESTORE TEL 3 .
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 61 W I818G 10/05 ADDRESS NUMBER INDEX ADDRESS 0000 ......... ............. EXIT DELAY ..... .................... ..................... ............................................
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 62 WI818G 10 /05 ADDRESS NUMBER INDEX (CONT'D) ADDRESS 0577-0596 .. .......... CS RECEIVER TELEPHONE NUMBERS .. .................................. ................ .........
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 63 W I818G 10/05 ADDRESS NUMBER INDEX (CONT'D) ADDRESS 2408 ............ .......... AC FAIL REPORT DE LAY ........... .................... ..................... .............
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 64 WI818G 10 /05 ADDRESS NUMBER INDEX (CONT'D) ADDRESS 2421 ...................... VERI-PHONE ZONES PRIO RITY OVER ALARMS .......... ............................... ......35 ADDRESS 2421 .
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 65 W I818G 10/05 ADDRESS NUMBER INDEX (CONT'D) ADDRESS 3874 ............ .......... ENABLE SET TIME/DAT E MESSAGE .......... .................... ................. ..........
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 66 WI818G 10 /05 NOTES.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 67 W I818G 10/05 NOTES.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 68 WI818G 10 /05 GEM-P3200 WIRING DIA GRAM.
An important point after buying a device Napco Security Technologies GEM-P3200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Napco Security Technologies GEM-P3200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Napco Security Technologies GEM-P3200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Napco Security Technologies GEM-P3200 you will learn all the available features of the product, as well as information on its operation. The information that you get Napco Security Technologies GEM-P3200 will certainly help you make a decision on the purchase.
If you already are a holder of Napco Security Technologies GEM-P3200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Napco Security Technologies GEM-P3200.
However, one of the most important roles played by the user manual is to help in solving problems with Napco Security Technologies GEM-P3200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Napco Security Technologies GEM-P3200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
