Instruction/ maintenance manual of the product UHF4HTSYS10 Nady Systems
Go to page of 12
OWNER'S MANUAL UHF-4 Single Channel UHF DigiTRU Diversity™ Wireless System UHF4_man 2/15/05, 4:09 PM 1.
CONTENTS ........................................................................................... 2 INTRODUCTION .................................................................................... 2 USING THIS MANUAL ..............................
3 UHF-4 RECEIVER • Unprecedented value in a full-featured single-channel UHF wireless mic system — with interference-free operation in any application or locale on select UHF frequencies within se.
4 1. Rackmounting the Receiver There are 2 options available for rackmounting the UHF-4 receiver: singly or side-by- side with another UHF-4 Series receiver. a. Single mounting: Remove the receiver SIDE MOUNT CLIP (1) from each side of the receiver (as shown) and slide in the optional ERM-3 RACK EARS (2) .
5 5. Connecting the Audio Output The UHF-4 receiver provides both a fixed mic level BALANCED MIC AUDIO OUTPUT XLR (7) and an adjustable line level AUX AUDIO OUTPUT 1/4" jack (10 ).
6 12 11 15 13 14 15 10 98 6 5 7 2 1 2 4 3 1 4 UHF4_man 2/15/05, 4:10 PM 6.
7 1. Unscrew the BATTERY COMPARTMENT COVER (16) and remove, exposing the BATTERY HOLDER (17 ). Insert a fresh 9V ALKALINE BATTERY (18 ), observing the correct polarity as marked, and screw the cover back on to the microphone. Make sure the cover is screwed on completely.
8 1. Snap open the BATTERY DOOR (22) and insert a fresh 9V alkaline battery into the BATTERY COMPARTMENT (23) , observing the correct polarity. Fresh alkaline batteries can last up to 10 hours in use, but in order to ensure optimum performance, it is recommended that the battery be replaced after 6-8 hours of use.
9 6. Instrument Use Secure the connection from the GT CABLE (30) by turning the slip ring on the plug into the transmitter clockwise to thread it on the jack.
10 30 31 32 Opening Battery Compartment 22 23 24 26 25 28 27 29 Instrument GH L G HL GH L G HL GH L G HL Headworn Lavalier INPUT SELECTOR SWITCHES UHF4_man 2/15/05, 4:10 PM 10.
11 UHF-4 OVERALL SYSTEM PERFORMANCE Frequency Response 30 Hz - 18 KHz, +/– 3 dB Dynamic Range 120 dB Total Harmonic Distortion < 0.6% RF Carrier Frequency Range UHF, choice of single frequencies within separate bands 902-928 and 944-952 MH z Frequency Stability +/- 0.
Nady Wireless Systems are type accepted under FCC rules parts 90, 74 and 15. The device complies with RSS-210 of Industry & Science Canada. Operation is subject to the following two conditions: (1.
An important point after buying a device Nady Systems UHF4HTSYS10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nady Systems UHF4HTSYS10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nady Systems UHF4HTSYS10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nady Systems UHF4HTSYS10 you will learn all the available features of the product, as well as information on its operation. The information that you get Nady Systems UHF4HTSYS10 will certainly help you make a decision on the purchase.
If you already are a holder of Nady Systems UHF4HTSYS10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nady Systems UHF4HTSYS10.
However, one of the most important roles played by the user manual is to help in solving problems with Nady Systems UHF4HTSYS10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nady Systems UHF4HTSYS10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
