Instruction/ maintenance manual of the product UHF3WPM2UMU2 Nady Systems
Go to page of 7
UHF-3 Single Channel UHF DigiTRU Diversity Wireless System.
3 UHF-3 RECEIVER • Half-rack receiver design with retractable front panel dual antennas • Clear channel operation on the wide open, uncluttered UHF band for interference-free performance in any ap.
5 5. Connecting the Audio Output The UHF-3 receiver provides both a fixed mic level BALANCED MIC AUDIO OUTPUT XLR (7) and an adjustable line level AUX AUDIO OUTPUT 1/4" jack (10 ).
7 Unscrew the BATTERY COMPARTMENT COVER (16) and remove, exposing the BATTERY HOLDER (17 ). Insert 2 fresh AA ALKALINE BATTERIES (18 ), observing the correct polarity as marked, and screw the cover back on to the microphone. Make sure the cover is screwed on completely.
9 (Note: Scratchy noises can sometimes occur when some electric guitars with dirty pots or connections are used with any wireless system. Therefore, the supplied INSTRUMENT CORD (34) has a factory installed capacitor inside the 1/4" plug.
11 UHF-3 OVERALL SYSTEM PERFORMANCE Frequency Response 30 Hz - 18 KHz, +/ – 3 dB Dynamic Range 120 dB Total Harmonic Distortion < 0.6% RF Carrier Frequency Range UHF, choice of single frequencies from 470-500 MHz Frequency Stability +/- 0.005%, crystal controlled Modulation FM (F3E), +/-20KHz normal Operating Range Up to 250 ft.
OWNER'S MANUAL Nady Wireless Systems are type accepted under FCC rules parts 90, 74 and 15. The device complies with RSS-210 of Industry & Science Canada.
An important point after buying a device Nady Systems UHF3WPM2UMU2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nady Systems UHF3WPM2UMU2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nady Systems UHF3WPM2UMU2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nady Systems UHF3WPM2UMU2 you will learn all the available features of the product, as well as information on its operation. The information that you get Nady Systems UHF3WPM2UMU2 will certainly help you make a decision on the purchase.
If you already are a holder of Nady Systems UHF3WPM2UMU2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nady Systems UHF3WPM2UMU2.
However, one of the most important roles played by the user manual is to help in solving problems with Nady Systems UHF3WPM2UMU2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nady Systems UHF3WPM2UMU2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
