Instruction/ maintenance manual of the product UB-10 Nady Systems
Go to page of 7
OWNER'S MANUAL UB-10 BODYP ACK TRANSMITTER URR-10 RECEIVER UH-10 HANDHELD MICROPHONE UHF Wireless Microphone System NADY SYSTEMS, INC. 6701 Shellmound Street Emeryville, CA 94608 USA T el: 510.652.241 1 • Fax: 510.652.5075 E-mail: service@nadywireless.
14 3 Nady wireless systems are type accepted under FCC rules, parts 90, 74 and 15. This device complies with RSS-210 of Industr y & Science Canada.
4 13 Thank you for purchasing a Nady URR-10 Diversity Wireless Microphone System and congratulations on your choice. The URR-10 is the best performance and price value available in rackmount UHF wirel.
12 5 1. Rackmounting the Receiver The URR-10 is supplied with RACK EARS (17) which can be attached with the screws provided on the front of the side panels to enable rackmounting the receiver . (Note: Do not mount the receiver in a rack directly above an amplifier or other source of high heat – this could degrade the performance of the URR-10.
6 11 5. Connecting the Audio Output The URR-10 receiver provides both a fixed mic level BALANCED AUDIO OUTPUT XLR (14) and an adjustable line level UNBALANCED AUDIO OUTPUT 1/4" JACK (13) . The level from the UNBALANCED OUTPUT is controlled by the front panel VOLUME CONTROL (6) and the rear panel LEVEL LOW/HI SWITCH (12) .
10 7 2 3 4 5 6 7 8 FRONT P ANEL REAR P ANEL 1 9 10 11 12 13 14 9 15 17 18 10. FUSE 11. DC INPUT JACK 12. LEVEL LOW/HI SWITCH 13. UNBALANCED AUDIO OUT 14. BALANCED AUDIO OUT 15. 12-15 VDC ADAPTER 16. TELESCOPING ANTENNAS 17. ST ANDARD RACK EARS 18. FR-2 FRONT -ANTENNA RACK KIT (optional) 1.
8 9 1. Unscrew the BA TTER Y COMP ARTMENT COVER (19) and remove, exposing the BA TTER Y HOLDER (20) . Insert a fr esh 9V ALKALINE BA TTERY (21) , observing the correct polarity as marked, and screw the cover back on to the microphone. Make sure the cover is screwed on completely .
An important point after buying a device Nady Systems UB-10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nady Systems UB-10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nady Systems UB-10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nady Systems UB-10 you will learn all the available features of the product, as well as information on its operation. The information that you get Nady Systems UB-10 will certainly help you make a decision on the purchase.
If you already are a holder of Nady Systems UB-10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nady Systems UB-10.
However, one of the most important roles played by the user manual is to help in solving problems with Nady Systems UB-10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nady Systems UB-10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
