Instruction/ maintenance manual of the product U-1000 Nady Systems
Go to page of 12
U U - - 1 1 0 0 0 0 0 0 S S e e r r i i e e s s 1000 Channel PLL Frequency Synthesized UHF Wireless Micr ophone and Instrument System Owners Manual nady .
T ABLE OF CONTENTS INTRODUCTION ................................................................................................2 SYSTEM FEA TURES ..........................................................................................3 OPERA TING INSTRUCTIONS .
SYSTEM FEA TURES U-1000 RECEIVER (Single Channel) and U-2000 RECEIVER (Dual Channel) • Unsurpassed UHF performance with 120 dB dynamic range and operation up to 500 feet line-of-sight • Rugged 19.
SPECIFICA TIONS 21 Input Impedance ........................................UH-1000: 10 K Ohms UB-1000: 500 K Ohm (Instr .), 10 K Ohms (Lav), 20 K Ohms (HM) Controls .
20 SPECIFICA TIONS SYSTEM SPECIFICA TIONS Operating Frequency Range ....................1000 channels switchable Freq. Synthesized ......................................PLL system with frequency stability <0.005% Frequency Response ................
19 TIPS • For operation with external antenna, low loss RF shielded cable should be used and the length of the cable should not exceed 3m. • Do not place the receive antenna within 1 meter of another receiver or antenna. • The receiver antenna should be kept away from any metal surface.
18 SYSTEM OPERA TION (Note: The UH transmitter CAP (7) must be removed before installing the USB cable.) (Note: Only one transmitter can be used with one UHF-1000 receiver . It is not possible to use two transmitters on the same frequency and mix the output of these transmitters into one wireless receiver .
Connecting Audio Output There are two audio outputs on the back of the receiver . Mic-level balanced and Line-level unbalanced. Use shielded audio cable for the connection between the receiver and the mixer . If the mixer / amp is a 1/4” phone jack, connect a cable from the 1/4” unbalanced audio output from the receiver .
16 SYSTEM OPERA TION Level adjustment UB-1000 T ransmitter The input level has four choices. “1” is the lowest gain, and “4” is the highest. For instrument, lavalier mic, and HM-1 headset mic use the normal setting of “3”. For HM-1 use setting “1”.
15 SYSTEM OPERA TION Frequency Selection The transmitter and receiver must be on the same frequency to operate correctly . Use the Channel frequency , or Group and Channel menus described in the Receiver and T ransmitter setup instructions.
14 OPERA TING INSTRUCTIONS UB-1000 Bodypack T ransmitter 6. Sensitivity Set Level (Input level sensitivity) In input level sensitivity has four choices. “1” is lowest gain, and “4” is highest gain. In the Sens Set Level Menu, hold the SET (10) button for 3 seconds.
13 OPERA TING INSTRUCTIONS UB-1000 Bodypack T ransmitter 2. “NADY UB-100” (can not be edited) 3. User Name The User Name field has 8 character spaces. Choose from upper and lower case alphabet, 27 special characters (including space), and 10 numbers.
An important point after buying a device Nady Systems U-1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nady Systems U-1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nady Systems U-1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nady Systems U-1000 you will learn all the available features of the product, as well as information on its operation. The information that you get Nady Systems U-1000 will certainly help you make a decision on the purchase.
If you already are a holder of Nady Systems U-1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nady Systems U-1000.
However, one of the most important roles played by the user manual is to help in solving problems with Nady Systems U-1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nady Systems U-1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
