Instruction/ maintenance manual of the product PM-200A Nady Systems
Go to page of 8
PM-200A ST AGE MONITOR Powered Personal Stage Monitor OWNER’S MANUAL.
PM-200A Powered Personal Stage Monitor 2 Congratulations—you have purchased one of the nest personal stage monitors on the market today . This unit was developed using the expertise of professional sound engineers and working musicians.
3 W aRning iMPoRT anT safeTY insTRUCTions When using this electronic device, basic precautions should always be taken, including the following: 1. Read all instructions before using the product. 2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, etc.
1. INPUTS The electronically balanced XLR MIC input is designed to accept signals from any balanced or unbalanced low impedance (Low Z) microphone. This input can also be used for low line level signals. Make sure to turn down the preceding unit to avoid distortion.
Note, the PM-200A internal speaker has been specially designed to reduce feedback frequencies while allowing maximum punch from center vocal and instrument tones. This allows clear and comprehensive monitoring with the speaker in close proximity with maximum feedback rejection.
6 P anel ConTRols and ConneCTions sPeCifiCa Tions 10. FUSE COMP ARTMENT Replace with only the same type fuse. If the fuse blows continuously , have the unit serviced by qualied personnel. The PM-200A powered mixer uses 20mm glass tube Fast Blow fuses: 6A 250V for 1 15V AC, 3A 250V for 230V AC.
7 one-YeaR liMiTed W aRRanTY Nady Systems, Inc. warrants to the original consumer purchaser that the unit is free from any defects in material or workmanship for a period of one year from the date of original retail purchase. If any such defect is discovered within the warranty period, Nady Systems, Inc.
SERVICE FOR YOUR NADY AUDIO PRODUCT In the U.S. If you are experiencing operational problems with your system, please refer to the Support page at www.
An important point after buying a device Nady Systems PM-200A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nady Systems PM-200A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nady Systems PM-200A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nady Systems PM-200A you will learn all the available features of the product, as well as information on its operation. The information that you get Nady Systems PM-200A will certainly help you make a decision on the purchase.
If you already are a holder of Nady Systems PM-200A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nady Systems PM-200A.
However, one of the most important roles played by the user manual is to help in solving problems with Nady Systems PM-200A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nady Systems PM-200A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
