Instruction/ maintenance manual of the product MSE-100A Nady Systems
Go to page of 10
PROCESSOR MSE-100A MUL TIBAND SOUND ENHANCEMENT PROCESSOR OWNER’S MANUAL.
MSE-100A MUL TIBAND SOUND ENHANCEMENT PROCESSOR • Professional multiband enhancer/exciter for all applications provides a subjective loudening of the audio and improves intelligibility , bass punch,.
W ARNING IMPORT ANT SAFETY INSTRUCTIONS When using this electronic device, basic precautions should always be taken, including the following: 1. Read all instructions before using the product. 2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, etc.
In the last two decades, sound enhancement systems such as enhancers, exciters, psycho-acoustic processors etc. have become an indispensable aid in the studio and have found widespread application in almost all film, broadcast and record- ing productions as well as in P .
1. POWER Switch with LED Indicator This switches the AC power ON or OFF . The integrated LED will light to indicate power ON. Note: In order to avoid possible undesired noise transients in a live sound reinforcement application, switch on the power to your MSE-100A before switching on the amplifi- cation system.
10. INPUTS The MSE-100A is equipped with both 1/4 ” (6.3mm) TRS and XLR audio input jacks. These can be used for either bal- anced or unbalanced operation as follows: • Unbalanced use of mono 1/4 ” plugs: T ip = Signal, Sleeve = Ground / Shield.
8 APPLICA TIONS BASIC SETTINGS We recommend setting the controls as indicated in the fol- lowing three sections. This will give you a better idea of the switch and control functions: 1. Set the MSE-100A channel (1 or 2) to bypass mode (the mode switch OUT and the red LED lit).
9 APPLICA TIONS ENHANCING THE SOUND OF T APE DUPLICA TIONS Even under the most favorable of conditions, presence, liveliness and transparency of the program material will suffer during each copying process. These losses are par- ticularly obvious when copying cassettes while simultane- ously using a noise reduction system.
10 APPLICA TIONS Note: If the P .A. speakers are operated in mono, the second channel of the MSE-100A can be used for another application. ENHANCING THE SOUND OF MONITOR SYSTEMS The MSE-100A can be effectively used to improve the sound of stage monitor systems.
NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET , EMERYVILLE, CA 94608 T el: 510.652.2411 • Fax: 510.652.5075 • ww w .nady.com SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via tele- phone at (510) 652-24 1 1, or e-mail at service@nady.
An important point after buying a device Nady Systems MSE-100A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nady Systems MSE-100A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nady Systems MSE-100A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nady Systems MSE-100A you will learn all the available features of the product, as well as information on its operation. The information that you get Nady Systems MSE-100A will certainly help you make a decision on the purchase.
If you already are a holder of Nady Systems MSE-100A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nady Systems MSE-100A.
However, one of the most important roles played by the user manual is to help in solving problems with Nady Systems MSE-100A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nady Systems MSE-100A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
