Instruction/ maintenance manual of the product ENCORE2LTOG1 Nady Systems
Go to page of 16
VHF Wireless Microphone System DigiTRU Diversity ™.
2 CONTENTS .................................................................................................... 2 INTRODUCTION ............................................................................................. 2 USING THIS MANUAL ..........
• A vailableonselectedfrequenciesintheVHFhighband (171‑216 MHz) for interference‑free, long‑range per formance • Proprietar ycompandingcircuitr yfor.
1. Rackmounting the Receiver TherearetwooptionsavailableforrackmountingtheEncoreIIreceiver: singly or side‑by‑side with another Encore Series receiver . a. Single mounting: Remove the receiver SIDE MOUNT CLIP (1) from each side of the receiver (as shown) and slide in the optional ERM-12 RACK EARS (9) .
5 5. Connecting the Audio Output The Encore II receiver provides both a fixed mic level BALANCED AUDIO OUTPUT XLR (14) andanadjustablelinelevel UNBALANCED AUDIO OUTPUT 1/4” JACK (13) . The level from the UNBALANCED OUTPUT is controlled by the rear panel VOLUME CONTROL (6) .
AF RF A B POWER 12-15V DC INPUT VOLUME BALANCED OUT UNBALANCED OUT MUTE 6 4 5 16 16 8 3 9 12 12 10 9 1 1 14 2 15 13 11 6 7.
1. Unscrew the BA TTERY COMP ARTMENT COVER (17) and remove, exposing the BA TTERY HOLDER (18) . Insert a fresh 9V ALKALINE BA TTERY (19) , obser ving the correct polarity as marked, and screw the cover back on to the microphone. Make sure the cover is screwed on completely .
8 21 20 18 19 17.
1. Snap open the BA TTERY COMP ARTMENT (22) and inser t a fresh 9V BA TTERY (23) , obser ving the correct polarity . Close the compartment. 2. The WL T is provided with a 3.5 mm LOCKING JACK (24) for connecting the microphone. Plug in either the LA V ALIER/LAPEL (25) or the HEADWORN MICROPHONE (26) , as supplied.
10 OFF/ST ANDBY/ON BA T LOW HI MIC Opening Batter y Compartment 27 22 23 26 28 29 24 22 25.
11 1. Snap open the BA TTERY COMP ARTMENT (30 ) and inser t a fresh 9V BA TTERY (31) , obser ving the correct polarity . Close the compartment. The WGT is provided with a 3.5 mm LOCKING JACK (32 ) for connecting the INSTRUMENT CABLE (35 ). T o secure the connection, turn the metal slip ring on the plug clockwise to thread itontothejack.
12 Opening Batter y Compartment 32 30 31 33 34 30 35.
13 ENCORE II OVERALL SYSTEM PERFORMANCE Reception Mode DigiTRU Diversity ™ Controls Power ON/OFF , volume control, mute control Connectors BalancedXLRandunbalancedadjustable 1/4”audiooutjacks,2.
14 SERVICE INFORMA TION In the U.S. If you are experiencing operational problems with your system, please refer to the Support page at www .nady .com for assistance.
Nady Systems, Inc. warrants to the original consumer purchaser that the unit is free from any defects in material or workmanship for a period of one year from the date of original retail purchase. If any such defect is discovered within the warranty period, Nady Systems, Inc.
NadyWirelessSystemsaretypeacceptedunderFCCrulesparts90,74and 15.ThedevicecomplieswithRSS-210ofIndustr y&ScienceCanada.
An important point after buying a device Nady Systems ENCORE2LTOG1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nady Systems ENCORE2LTOG1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nady Systems ENCORE2LTOG1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nady Systems ENCORE2LTOG1 you will learn all the available features of the product, as well as information on its operation. The information that you get Nady Systems ENCORE2LTOG1 will certainly help you make a decision on the purchase.
If you already are a holder of Nady Systems ENCORE2LTOG1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nady Systems ENCORE2LTOG1.
However, one of the most important roles played by the user manual is to help in solving problems with Nady Systems ENCORE2LTOG1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nady Systems ENCORE2LTOG1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
