Instruction/ maintenance manual of the product Encore I Nady Systems
Go to page of 11
Nady Wireless Systems are type accepted under FCC rules parts 90, 74 and 15. The device complies with RSS-210 of Industry & Science Canada. Operation is subject to the following two conditions: (1.
CONTENTS 2 CONTENTS ........................................................................................... 2 INTRODUCTION .................................................................................... 3 USING THIS MANUAL ...................
• Available on selected frequencies in the VHF high band (171-216 MHz) for interference-free, long-range performance • Proprietary companding circuitry for an industry-best 120dB Dynamic Range, an.
6 5. Connecting the Audio Output The Encore I receiver provides both a fixed mic level BALANCED AUDIO OUTPUT XLR (14) and an adjustable line level UNBALANCED AUDIO OUTPUT 1/4" JACK (13) . The level from the UNBALANCED OUTPUT is controlled by the rear panel VOLUME CONTROL (6) .
1. Unscrew the BATTERY COMPARTMENT COVER (17) and remove, exposing the BATTERY HOLDER (18) . Insert a fresh 9V ALKALINE BATTERY (19) , observing the correct polarity as marked, and screw the cover back on to the microphone. Make sure the cover is screwed on completely.
1. Snap open the BATTERY COMPARTMENT (22) and insert a fresh 9V BATTERY (23) , observing the correct polarity. Close the compartment. 2. The WLT-15 is provided with a 3.5 mm LOCKING JACK (24) for connecting the microphone. Plug in either the LAVALIER/LAPEL (25) or the HEADWORN MICRO- PHONE (26) , as supplied.
WGT-15 INSTRUMENT BODYPACK TRANSMITTER 12 1. Snap open the BATTERY COMPARTMENT (30) and insert a fresh 9V BATTERY (31) , observing the correct polarity. Close the compartment. The WGT-15 is provided with a 3.5 mm LOCKING JACK (32) for connecting the INSTRUMENT CABLE (35) .
THE LINK 2 ™ PLUG-IN TRANSMITTER 14 1. Transmitter Set-Up First, slide open the BATTERY COMPARTMENT DOOR (43) to expose compartment. Insert a fresh 9V ALKALINE BATTERY (45) , observing polarity.
38 XLR Connector – Connects microphone to the transmitter module for signal input Locking Ring – Locks microphone to the transmitter Optional Pouch – For lavalier bodypack operation (with beltcl.
(U.S.) Should your Nady Encore I Wireless Microphone System require service, please contact the Nady Service Department via telephone at (510) 652-2411 or e- mail to service@nadywireless.com for a Return Authorization (R/A) Number and a service quote (if out of warranty).
Nady Wireless Systems are type accepted under FCC rules parts 90, 74 and 15. The device complies with RSS-210 of Industry & Science Canada. Operation is subject to the following two conditions: (1.
An important point after buying a device Nady Systems Encore I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nady Systems Encore I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nady Systems Encore I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nady Systems Encore I you will learn all the available features of the product, as well as information on its operation. The information that you get Nady Systems Encore I will certainly help you make a decision on the purchase.
If you already are a holder of Nady Systems Encore I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nady Systems Encore I.
However, one of the most important roles played by the user manual is to help in solving problems with Nady Systems Encore I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nady Systems Encore I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
