Instruction/ maintenance manual of the product CX-23SW Nady Systems
Go to page of 7
CROSSOVER CX-23SW 3-WA Y STEREO PLUS SUBWOOFER OWNER’S MANUAL.
Crossovers provide precise frequency dividing for multi- amplified speaker applications, and are valuable tools in many professional live sound uses. The CX-23SW of fers 3-way active LOW/MID/HIGH outputs for each stereo channel and a mono subwoofer output.
IMPORT ANT SAFETY INSTRUCTIONS W ARNING -When using electric products, basic precautions should always be followed, including the following: 1. Read all the instructions before using the product. 2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, etc.
1. ON/OFF SWITCH: Caution: Always turn the Crossover ON before the amplifier , and turn it OFF after the amplifier or transients harmful to the speakers may result . 2. L/M/H OUTPUT LEVEL CONTROLS: These are used to adjust the output level of each way : LOW , MID and HIGH .
T ypical Set-up HIGH AMP VOL VOL MID AMP VOL VOL LOW AMP VOL VOL SUBWOOFER AMP VOL RIGHT LEFT RIGHT LEFT RIGHT LEFT SUBWOOFER SOURCE LINE-IN 115V~/60Hz 230V~/50Hz FUSE 0.5A/250V HIGH HIGH MID MID LOW LOW OUTPUT OUTPUT INPUT INPUT R CHANNEL L CHANNEL SUB WOOFER Emeryville, CA, USA Made in Taiwan NADY SYSTEMS, Inc.
Crossover T ype: Stereo 3 ways + Subwoofer Crossover Frequencies Subwoofer: 50 - 250Hz LM: 70 – 1000Hz MH: 480 – 7000Hz Filter T ype (Slope): 2nd order , 12dB/Octave Inputs T ype: Balanced XLR Imp.
NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET , EMERYVILLE, CA 94608 T el: 510.652.2411 • Fax: 510.652.5075 • www.nadywir eless.com SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-241 1 or E-mail at service@nadywireless.
An important point after buying a device Nady Systems CX-23SW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nady Systems CX-23SW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nady Systems CX-23SW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nady Systems CX-23SW you will learn all the available features of the product, as well as information on its operation. The information that you get Nady Systems CX-23SW will certainly help you make a decision on the purchase.
If you already are a holder of Nady Systems CX-23SW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nady Systems CX-23SW.
However, one of the most important roles played by the user manual is to help in solving problems with Nady Systems CX-23SW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nady Systems CX-23SW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
