Instruction/ maintenance manual of the product S70 NAD
Go to page of 24
S70 SYSTEM REMOTE CONTROL OWNER’S MANUAL.
CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Installing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Set-up of the S70 remote contr ol .
3 Main Menu NAD S70 System Remote Control Menu & Sub-menu Structure FIGURE 1 NOTE: Component menus are optional. Please refer to the chapter ‘Setup of the S70 remote contr ol’ Return to Main Menu by pressing button next to ‘EXIT’ in display Ti mer Status Menu Component No.
4.
5.
6.
7.
8 FIGURE 6.
9 FIGURE 6a.
10 FIGURE 6b.
11 FIGURE 6c.
12 FIGURE 6d.
13 FIGURE 6e.
14 FIGURE 7.
15 FIGURE 8.
16 FIGURE 9.
17 INTRODUCTION Thank you for purchasing the NAD S70 System Remote Contr ol. With the S70 you can control all components of your NAD Silver Series system. The S70 can easily be customised to suit your particular NAD Silver Series system and provides additional functionality such as a clock, Sleep and on/off timer .
Press any button (other than V olume Up/Down) to activate the display . In the Main menu, each category of Silver Series component is repr esented by its own icon. Refer to figure No.2. To set up the S70 for your system: •F r om the Main Menu on the r emote control, pr ess the button next to where it indicates "SYSTEM" in the display .
necessary to adjust contrast. •F r om the Main Menu, pr ess the button next to "SYSTEM". •P r ess the button next to ">>" to incr ease contrast or "<<" to decrease contrast. • When the optimum contrast level has been set, press the button next to "EXIT" to return to Main Menu.
menus. • In the Main Menu, press the button next to component displayed you wish to operate, e.g. "AMP". • The appropriate Component Menu and its icon appear in the top of the display , the "AMP" Menu in this example, with all available functions will appear .
NOTES: Make sure that the S70 is located well within range of all components, otherwise the Sleep Timer function will function erratically or not at all. The Sleep function is available only if Clock function has been selected (indicated by tick-mark) in the System Set-up Menu.
22 TROUBLESHOOTING GUIDE Remote control works intermittently or doesn’t work at all • Battery flat or snap-on connector incorrectly attached • IR transmitter or receiver windows obstructed • I.
23.
www .NADelectronics.com ©2001 NAD ELECTRONICS INTERNA TIONAL All rights reserved. No part of this publication may be repr oduced, stored or transmitted in any form without the written permission of N.
An important point after buying a device NAD S70 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NAD S70 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NAD S70 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NAD S70 you will learn all the available features of the product, as well as information on its operation. The information that you get NAD S70 will certainly help you make a decision on the purchase.
If you already are a holder of NAD S70, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NAD S70.
However, one of the most important roles played by the user manual is to help in solving problems with NAD S70. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NAD S70 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
