Instruction/ maintenance manual of the product MX-406 Ashly
Go to page of 12
All Rights Reserved MX-406 Stereo Microphone/Line Mixer Operating Manual Ashly Audio Inc. 847 Holt Road, Webster, NY 14580-9103 Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739 www.ashly.com All Trademarks referred to herein, are the property of their respective owners.
Page - 2 Operator Manual – MX-406 Mixer Copyright© 2007 – Ashly Audio Inc. This page intentionally left blank.
Operator Manual – MX-406 Mixer Page - 3 All Rights Reserved Important Safety Instructions Consignes de sécurité à lire attentivement 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Page - 4 Operator Manual – MX-406 Mixer Copyright© 2007 – Ashly Audio Inc. Introduction Congratulations on your purchase of an Ashly MX-406 stereo mic/line mixer, a professional, studio quality solution to everday mixing needs.
Operator Manual – MX-406 Mixer Page - 5 All Rights Reserved MX-406 Mixer The MX-406 is a versatile rack-mountable mixer capable of supporting the following applications: Small Sound Reinforcemen.
Page - 6 Operator Manual – MX-406 Mixer Copyright© 2007 – Ashly Audio Inc. Physical Description The MX-406 is 2RU, and weighs 13 pounds. MX-406 Front Panel 1. Input Gain - This three position switch sets the operating level of the microphone and line input preamp.
Operator Manual – MX-406 Mixer Page - 7 All Rights Reserved MX-406 Rear Panel 1. Microphone Input - The MX-406 microphone input is an active balanced type with a nominal impedance of 1200 ohms.
Page - 8 Operator Manual – MX-406 Mixer Copyright© 2007 – Ashly Audio Inc. Typical Applications The following information will help you make the most of your new mixer: Small Sound Reinforcement System The MX-406 can be used to mix typical sound sources that might be found in a church, small club, school theater or similar environment.
Operator Manual – MX-406 Mixer Page - 9 All Rights Reserved Troubleshooting Situation Action No Sound Check the AC power. Is the power switch on and illuminated? Check the level meters. If they are operating, either the problem is between the mixer and the later components in the system.
Page - 10 Operator Manual – MX-406 Mixer Copyright© 2007 – Ashly Audio Inc. Specifications SPECIFICATION MX-406 DISTORTION THD at +4 dBu, 20Hz-20KHz <0.
Operator Manual – MX-406 Mixer Page - 11 All Rights Reserved Limited Warranty Warranty service for this unit will be provided by ASHLY AUDIO INC. in accordance with the following warrant statement.
Copyright© 2007 – Ashly Audio Inc..
An important point after buying a device Ashly MX-406 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ashly MX-406 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ashly MX-406 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ashly MX-406 you will learn all the available features of the product, as well as information on its operation. The information that you get Ashly MX-406 will certainly help you make a decision on the purchase.
If you already are a holder of Ashly MX-406, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ashly MX-406.
However, one of the most important roles played by the user manual is to help in solving problems with Ashly MX-406. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ashly MX-406 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
