Instruction/ maintenance manual of the product 400 Series N-Tron
Go to page of 16
Rev 041008 1 400 Series Industrial Ethernet Switches Installation Guide.
Rev 041008 2 Industrial Ethernet Switch In stallation Guid e 405TX 405FX-SC 405FX-ST 405FXE-SC-YY 405FXE-ST-YY Where: YY = -15, -40, or -80.
Rev 041008 3 Copyright, © N-TRON Corp., 2 008 820 S. University Blvd., Suit e 4E Mobile, AL 36609 USA All r ights r eserved. Reproduction, adaptation, or translation without prior wri tten permissio n fro m N-TR ON Corp. is prohibited, exc ept as allowed under copyright laws.
Rev 041008 4 Safety Warnings ELECTRICAL SAFETY WARNING: Do not di sconnect while circuit is live, un less area is known to be non- hazardous. WARNING: Disconn ect the power cable before removing the en closure top. WARNING: Do not opera te the unit with the top cover removed.
Rev 041008 5 405FX, 405FXE, & 405 TX Industrial Et hernet Switches The 405TX and 405FX Un managed Industrial Ethernet Switches support high speed layer 2 switching between ports. The 405TX is an a ffordable 5 po rt unmanage d s witch that is ca pable of auto negotiat ing 10/100 Mb an d half/full duplex c ommunications.
Rev 041008 6 PACKAGE CONTENTS Please make sure the Ethernet Switch package contains the following items: 1. 405FX/405FXE/405TX Et hernet Switch 2. This Installation Guide Contact your carrier if any it ems are damaged. INSTALLATION Read the following warning be fore beginning the installation: WARNING The 405FXE unit co ntains a Class 1 Laser.
Rev 041008 7 405FX/405FXE HALF DUPLEX SETUP While all RJ45 ports are Autosensing, the 405FX/405FXE Fi ber Optic Port i s factory configured for full duplex operation. In t he event half duplex operation i s desired, follow these steps: 1. Remove the Voltage Input Power Plugs.
Rev 041008 8 DIN-Rail Mounting Install the unit in a standard DIN-Rail. Reces s the unit to allow at least 5” of horizontal clearance for fiber optic cable bend radius (2” for TX models). Note: This unit may be mounted horizontally or ver tically.
Rev 041008 9 FRONT PANEL From Left to Right: LNK Link LED for Fiber Optic Port (405FX/FXE only) TX Fiber Optic Transmit Port ( 405FX/FXE Only) RX Fiber Optic Receive Port ( 405FX/FXE Only) ACT Acti vi.
Rev 041008 10 LED’s: The table below desc ribes the operating modes: LED Color Description GREEN Power is Applied OFF Power is OFF ! RED Controller HW Error OFF No Errors.
Rev 041008 11 N-TRON SWITCH GRO UNDING TECHNIQ UES The grounding philosophy of any control sys tem is an integral part of t he design. N-Tron switches are designed to be gro unded, but the us er has been given the fle xibility to floa t the switch when requi red.
Rev 041008 12 RJ45 CONNECTOR CRI MP SPECIFICATIO NS Please reference the illustrati on below for your Cat5 cable specific ations:.
Rev 041008 13 CONNECTING THE UNIT For 405FX & 4 05FXE units, remove th e dust cap from the fiber optic connectors and conn ect the fiber optic cables. The TX port o n t he 405FX should be connected t o t he RX port of the far end st ation. The RX port on the 405FX sho uld be connected to the TX port of the far end station.
Rev 041008 14 KEY SPECIFICATIONS Physical Height: 2.13" (5.41 cm) Width: 5.00" (1 2.70 cm) Depth: 3.00" (7.62 cm) Weight: ~ 1.2 lbs. (0.6 kg) (Note: can be mounted hori zontally or vertically) Electrical Input Voltage: 10-30 VDC (Reg ulated) Input Current: 220mA max.
Rev 041008 15 Regulatory Approvals: Safety: UL 1604 (US and Cana da) Hazardous Locati ons, Class I, Zone 2, Group IIC, T4A EMI: EN55022 – Cl ass A FCC Part 15 Class A EMS: EN55024:1998 EN61000-4-2:1995 EN61000-4-3:1997 EN61000-4-4:1995 EN61000-4-5:1995 EN61000-4-6:1996 GOST-R Certified.
Rev 041008 16 N-TRON Limited Warrant y N-TRON, Corp. warrants to the end user that this hardware product will be fr ee from defects in workmanship and materials, under normal u se and service, for the applicable war ranty period from the date o f purchase from N-TRON or its au thorized reseller.
An important point after buying a device N-Tron 400 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought N-Tron 400 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data N-Tron 400 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, N-Tron 400 Series you will learn all the available features of the product, as well as information on its operation. The information that you get N-Tron 400 Series will certainly help you make a decision on the purchase.
If you already are a holder of N-Tron 400 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime N-Tron 400 Series.
However, one of the most important roles played by the user manual is to help in solving problems with N-Tron 400 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device N-Tron 400 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
