Instruction/ maintenance manual of the product 300 Series N-Tron
Go to page of 16
Rev 100807 1 300 Series Media Converter & Industrial Ethernet Switches Installation Guide.
Rev 100807 2 Industrial Ethernet Switch In stallation Guid e 302MC-XX 302MCE-XX-YY 304TX 305FX-XX 305FXE-XX-YY 306TX 306FX2-XX 306FXE2-XX-YY 308TX Where: XX = ST or SC and YY = -15, -40, or -80.
Rev 100807 3 Copyright, © N-TRON Corp., 2 005 820 S. University Blvd., Suit e 4E Mobile, AL 36609 USA All r ights r eserved. Reproduction, adaptation, or translation without prior wri tten permissio n fro m N-TR ON Corp. is prohibited, exc ept as allowed under copyright laws.
Rev 100807 4 Safety Warnings ELECTRICAL SAFETY WARNING: Explosion hazard, do not disconnect while circuits is live unless area is known to be non- hazardous. WARNING: Disconn ect the power cable before removing the en closure top. WARNING: Do not opera te the unit with the top cover removed.
Rev 100807 5 Hazardous Location Installation Requirements 1. WARNING: Do not d isconnect while circuit is live, unless area is known to be non- hazardous. 2. WARNING: Install on ly in accordance with Local & National Codes of Authorities Havin g Jurisdiction.
Rev 100807 6 300 Series Industrial Ethernet Switches The 3 00 Serie s Unmanaged Industrial Ethernet Switches supp ort high speed layer 2 switching between ports.
Rev 100807 7 PACKAGE CONTENTS Please make sure the Ethernet Switch package contains the following items: 1. 300 Series Unit 2. N-Tron Product CD Contact your carrier if any it ems are damaged. INSTALLATION Read the following warning be fore beginning the installation: WARNING FXE units contain a class 1 laser.
Rev 100807 8 DIN-Rail Mounting Install the unit in a standar d DIN-Rail. Recess the uni t to allow at least 5” of horizontal c learance for fiber optic cable bend radi us (2” for TX models).
Rev 100807 9 FRONT PANEL LNK Link LED for Fiber Optic Ports TX Fiber Optic Transmit Ports RX Fiber Optic Receive Ports ACT Activity LED for Fiber Opt ic Ports RJ45 Ports Ports 1-4 Auto sensi ng 10/100BaseT Connections Green LED lights when Power is connecte d NOTE: Each RJ45 data port has two LED’s for each con nector.
Rev 100807 10 APPLYING POWER (To p View) Unscrew & Remove the DC Volt age Input Plug from the to p header. Install the DC Power Ca bles into the Plug (obs erving polarity on unit) . Plug the Voltage Input Plug ba ck into the top header. Tightening torque for the te rminal block power plug i s 0.
Rev 100807 11 N-TRON SWITCH GRO UNDING TECHNIQ UES The grounding philosophy of any control sys tem is an integral part of t he design. N-Tron switches are designed to be gro unded, but the us er has been given the fle xibility to floa t the switch when requi red.
Rev 100807 12 RJ45 CONNECTOR CRI MP SPECIFICATIO NS Please reference the illustrati on below for your Cat5 cable specific ations:.
Rev 100807 13 CONNECTING THE UNIT For 300 Series fiber units, remove the dust cap fro m the fiber optic connect ors and connect the fiber optic cables. For Fiber Optic ports, th e TX port on the near st ation should be conn ected to th e RX port of the far end station, a nd the RX port should be connect ed to the TX port of the far end st ation.
Rev 100807 14 KEY SPECIFICATIONS Physical Height: 3.98” (max.) Width: 2.01” (max.) Depth: 4.19” (max.) Weight: 0.75 lbs. Electrical Input Voltage: 10-30 VDC (Reg ulated) Input Current: 230mA max. @ 24VDC (Ste ady State) Inrush Current: 9.0Amp/0.
Rev 100807 15 Regulatory Approvals Safety: UL 1604 (US and Cana da) Hazardous Locati ons, Class I, Div 2, Groups A, B, C, D, T4 A EMI: EN61000-6-4, EN55011 - Class A FCC Title 47, Part 15 , Subpart B .
Rev 100807 16 N-TRON Limited Warrant y N-TRON, Corp. warrant s to the end user t hat this hardware product will be fr ee from defects i n workmanship and materials, under normal use and service, f or the applicable warranty period from the date o f purchase from N-TRON or its authorized reseller.
An important point after buying a device N-Tron 300 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought N-Tron 300 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data N-Tron 300 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, N-Tron 300 Series you will learn all the available features of the product, as well as information on its operation. The information that you get N-Tron 300 Series will certainly help you make a decision on the purchase.
If you already are a holder of N-Tron 300 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime N-Tron 300 Series.
However, one of the most important roles played by the user manual is to help in solving problems with N-Tron 300 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device N-Tron 300 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
