Instruction/ maintenance manual of the product LM2000S Murphy
Go to page of 2
Description Murphy LM2000 model maintains the crankcase oil level of an engine, pump or compressor. Adjusted to the correct running-oil-level , the LM2000 will replenish oil as it is used. An inte- gral, low-level switch will alarm and/or shutdown the equipment if supply oil is lost and the equip- ment continues to use oil.
LM-00010B page 2 of 2 Shutoff Valve Oil Outlet Electrical Conduit wire to switch circuits Oil Inlet LM2000 Oil Level Maintainer CRANKCASE CLEAN Oil Supply Tank. Height above LM recommended 2 ft. (0.6m) minimum and 25 ft (7.7m) maximum. For vented crankcase use the plastic vent plug or optional vent tube kit (15000954).
An important point after buying a device Murphy LM2000S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Murphy LM2000S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Murphy LM2000S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Murphy LM2000S you will learn all the available features of the product, as well as information on its operation. The information that you get Murphy LM2000S will certainly help you make a decision on the purchase.
If you already are a holder of Murphy LM2000S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Murphy LM2000S.
However, one of the most important roles played by the user manual is to help in solving problems with Murphy LM2000S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Murphy LM2000S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
