Instruction/ maintenance manual of the product MTX80SD Multiquip
Go to page of 58
OPERA TION AND P AR TS MANUAL THIS MANU AL MUST A CCOMP ANY THE EQUIPMENT A T ALL TIMES. T o find the latest re vision of this publication, visit our website at: www .
P A GE 2 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) PROPOSITION 65 W ARNING.
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 3 NOTES.
P A GE 4 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) T ABLE OF CONTENTS MTX80SD Rammer Proposition 65 Warning ........................................... 2 P ar ts Ordering Procedures ..................................
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 5 P AR TS ORDERING PROCEDURES www .multiquip .com Or dering par ts has never been easier! Choose fr om three easy op.
P A GE 6 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) SAFETY INFORMA TION Do not operate or ser vice the equipment before reading the entire manual. Saf ety precautions should be follo wed at all times when operating this equipment.
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 7 SAFETY INFORMA TION GENERAL SAFETY CA UTION NEV ER ope ra te this equ ipm ent wit hou t pro per pro tec tiv e .
P A GE 8 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) SAFETY INFORMA TION ENGINE SAFETY D ANGER Th e engin e fu el ex hau st gase s con tai n poi son ous carb on mono xide. This gas is color less and odor less, and can cause death if inhaled.
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 9 SAFETY INFORMA TION TRANSPORTING SAFETY CA UTION NEVER allow any person or animal to stand underneath the equipment while lifting.
P A GE 10 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) SPECIFICA TIONS T able 1. Rammer Specifications Over all Height 39.37 in. (1000 mm) Over all Width 13.89 in. (353 mm) Over Length 30.78 in. (782 mm) Shoe Size (W x L) 13.
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 11 GENERAL INFORMA TION The Multiquip MTX80SD tamping rammer is a powerful compacting tool capable of applying a tremendous force in consecutiv e impacts to a soil surf ace.
P A GE 12 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) COMPONENTS Figure 1. MTX80SD Rammer 2 1 9 3 4 5 6 7 10 1 1 12 13 8 Fig ure 1 show s the locat ion of the contro ls and compo nent s f or the MTX80SD T amping Rammer .
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 13 BASIC ENGINE Figure 2. Robin ER120D45000 Engine The engine (Figure 2) must be chec ked f or proper lubri- cation and filled with fuel prior to operation. Ref er to the engine manuf acturer's manual for detailed operation and ser vice inf or mation.
P A GE 14 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) INSPECTION It is e xtremely important that this section be read carefully bef ore attempting to operate the rammer . DO NO T use your r ammer until this section is thoroughly understood.
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 15 OPERA TION INITIAL ST ARTUP When star ting the MTX80SD T amping Rammer perf or m the f ollowing: 1. Slide the throttle lev er from the stop to the idle position ( ) (Figure 6).
P A GE 16 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) OPERA TION OPERA TION 1. T o star t the rammer tamping action, mo ve the throttle le ver (Figur e 10) quic kly from IDL E to the ST ART ( ) position. DO NO T move the throttle lev er slowly as this ma y cause damage to the clutch or spring.
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 17 MAINTENANCE D AIL Y Thoroughly remov e dirt and oil from the engine and control area. Clean or replace the air cleaner elements as necessar y . Check and retighten all f asteners as necessar y .
P A GE 18 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) TROUBLESHOOTING T roubleshooting (Engine) Symptom P ossible Problem Solution Diffi cult to star t, fuel is av ailable, b ut no spark at spark plug. Combo lev er in incorrect position? Make sure combo le ver is in start position.
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 19 TROUBLESHOOTING T roubleshooting (Engine) - contin ued Symptom Possible Pr oblem Solution Weak in po wer , compression is proper and does not misfi re. Air cleaner dir ty? Clean or replace air cleaner .
P A GE 20 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) TROUBLESHOOTING T roubleshooting (Rammer) Symptom P ossible Prob lem Solution Engine runs but rammer jumps erratically or not at all. Operating speed of throttle le v er is incorrectly set? Set throttle le ver to correct position.
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 21 NOTES.
P A GE 22 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) EXPLANA TION OF CODE IN REMARKS COLUMN The following section explains the diff erent symbols and remarks used in the P ar ts section of this manual. Use the help number s fo und on the back page of the man ual if ther e are any questions .
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 23 SUGGESTED SP ARE P AR TS NO TICE P ar t numbers on this Suggested Spare P ar ts list may supersede/replace the par t numbers shown in the f ollowing par ts lists. MTX80SD T AMPING RAMMER WITH ROBIN ER120D4500 ENGINE 1 to 3 units Qty .
P A GE 24 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) NAMEPLA TES AND DECALS 1 1 1 2 10 9 3 5 6 7 4 8 A (DECAL SET) Gasoline Only ( < Essence Uniquement Bitte nur B.
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 25 NAMEPLA TES AND DECALS NO . P ART NO . P ART NAME QTY . REMARKS 1 920215440 DECAL: OPERA TION 1 2# DECAL: AIR CLE.
P A GE 26 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) CRANKCASE AND ENGINE ASSY P A GE 26 — MTX80SD RAMMER — OPERA TION AND P ARTS MANU AL — REV .
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 27 CRANKCASE AND ENGINE ASSY NO . P ART NO . P ART NAME QTY . REMARKS 1 366910010 CRANKCASE .
P A GE 28 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) CRANKCASE AND ENGINE ASSY P A GE 26 — MTX80SD RAMMER — OPERA TION AND P ARTS MANU AL — REV .
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 29 CRANKCASE AND ENGINE ASSY NO . P ART NO . P ART NAME QTY . REMARKS 40-1 001220851 BOL T 8X55 T 2 40-2 030208200 W.
P A GE 30 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) GUIDE CYLINDER ASSY P A GE 28 — MTX80SD RAMMER — OPERA TION AND P ARTS MANU AL — REV .
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 31 GUIDE CYLINDER ASSY NO . P ART NO . P ART NAME QTY . REMARKS 1 366460100 PIST ON PIN 1 2 366459910 PLUG, PIST ON PIN 2 3 366346000 PIST ON ROD 1 4 371459690 PIST ON END 1 5-1 001121230 BOL T 12X30 T P1.
P A GE 32 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) FOOT ASSY 2 3 2 3 6 1 5 15 14 4 8 9 8 9.
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 33 FOOT ASSY NO . P ART NO . P ART NAME QTY . REMARKS 1 8511S FOO T ASSY 285 .
P A GE 34 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) FUEL T ANK AND HANDLE ASSY 3 1 4-2 4-1 7 6 5 41 41 43 43 42 42 9 10 23 54 51 22 53 14 15 56 2-1 2-2 11 11-1 11-2 .
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 35 FUEL T ANK AND HANDLE ASSY NO . P ART NO . P ART NAME QTY . REMARKS 1 366346270 SHOCK ABSORBER W/PIN 2 2-1 014210.
P A GE 36 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) COMBINA TION LEVER ASSY 1 1 12 13 14 2 4 6 9 7 7 8 5 A 1 1 1 10 3 BODY B.
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 37 COMBINA TION LEVER ASSY NO . P ART NO . P ART NAME QTY . REMARKS A 366900032 COMB. LEVER W/ THRO TTLE WIRE...............1................ INCLUDES ITEMS W/@ B 956200110 COMB.
P A GE 38 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) TOOLS P A GE 38 — MTX80SD RAMMER — OPERA TION AND P ARTS MANU AL — REV .
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 39 TOOLS NO . P ART NO . P ART NAME QTY . REMARKS 1 981010400 CLUTCH PULLER A 1 2 983010060 CLUTCH MOUNTER 1 3 98391.
P A GE 40 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) ROBIN ER120D45000 ENGINE — CRANKCASE ASSY . GASKET SET 280 285 301 10 26 30 40 50 60 70 75 80 85 90 113 114 115.
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 41 ROBIN ER120D45000 ENGINE — CRANKCASE ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 10 21E10101M1 CRANKCASE CP ..............................................1...
P A GE 42 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) R O B I N E R 1 2 0 D 4 5 0 00 E N G I N E — C R A N KS H A F T , PI S T ON A S S Y .
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 43 R O B I N E R 1 2 0 D 4 5 0 00 E N G I N E — C R A N KS H A F T , PI S T ON A SS Y .
P A GE 44 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) R O B I N E R 1 2 0 D 4 5 0 00 E N G I N E — INT AKE, EXHAUST ASSY .
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 45 R O B I N E R 1 2 0 D 4 5 0 00 E N G I N E — INT AKE, EXHAUST ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 10 21E31601L1 CAM PULLEYCP 1 23 21E35101H1 PIN (CAM PULLEY) CP .
P A GE 46 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) R O B I N E R 1 2 0 D 4 5 0 0 0 E N G I N E — G O V E R N O R , O P E R A T I O N A S S Y .
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 47 R O B I N E R 1 2 0 D 4 5 0 0 0 E N G I N E — G O V E R N O R , O P E R A T I O N A S S Y .
P A GE 48 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) ROBIN ER120D45000 ENGINE — COOLING ASSY . 40 40 40 90 95 95 40.
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 49 ROBIN ER120D45000 ENGINE — COOLING ASSY . NO . P ART NO . P ART NAME QTY .
P A GE 50 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) ROBIN ER120D45000 ENGINE — ST AR TING ASSY . 214 210 211 213 212 217 216 215 249 218 280.
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 51 ROBIN ER120D45000 ENGINE — ST AR TING ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 210 21E50201L0 RECOIL ST AR TER ASSY .................................1.....
P A GE 52 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) ROBIN ER120D45000 ENGINE — FUEL LUBRICANT ASSY . 918 210 902 910 912 943 900 906 916 908 920 926 915 911 914 96.
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 53 ROBIN ER120D45000 ENGINE — FUEL LUBRICANT ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 210 21E6240100 CARBURET OR ASSY .......................................1.
P A GE 54 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) ROBIN ER120D45000 ENGINE — ELECTRIC DEVICE ASSY . 10 11 30 70 75 100 112 76.
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 55 ROBIN ER120D45000 ENGINE — ELECTRIC DEVICE ASSY . NO . P ART NO .
P A GE 56 — MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) TERMS AND CONDITIONS OF SALE — P AR TS P A YME NT TERMS T er ms of payment for par ts are net 30 days. FREIG HT POLICY Al l par t s ord er s wi ll b e s hi p pe d c o ll ec t or prepaid with the charges added to the invoice.
MTX80SD RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/20/12) — P A GE 57 NOTES.
OPERA TION AND P AR TS MANUAL Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING United St a teS Multiquip Corporate Office MQ Parts Department 18910 Wilmington A ve. Carson, CA 90746 Contact: mq@multiquip .
An important point after buying a device Multiquip MTX80SD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multiquip MTX80SD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multiquip MTX80SD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multiquip MTX80SD you will learn all the available features of the product, as well as information on its operation. The information that you get Multiquip MTX80SD will certainly help you make a decision on the purchase.
If you already are a holder of Multiquip MTX80SD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multiquip MTX80SD.
However, one of the most important roles played by the user manual is to help in solving problems with Multiquip MTX80SD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multiquip MTX80SD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
