Instruction/ maintenance manual of the product SW2 MTX
Go to page of 10
SW2 Powered Home Subwoofer Owner ’s Manual 1 Mitek Plaza Winslow , IL 61089 815-367-3000 800-225-5689 21A7059.
TECHNICAL ASSIST ANCE For additional technical assistance you can visit our web site at www .mtx.com. Otherwise, our technical service representatives can be reached by phone: 1-800-CALL-MTX or by E-mail: technical@mtx.
14 SPECIFICA TION Amplifier T ype: Class A/B Frequency response: 35 Hz - 160 Hz Lo-pass xover 60 Hz - 160 Hz at 18 dB per octave Inputs: Line level and speaker level full range Outputs: Line level Hi-.
1. Read Instructions – All the safety and operating instructions should be read before the product is opened. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.
POWERED HOME SUBWOOFER OWNER’S MANUAL T able of Contents Introduction .............................................................. 2 Unpacking/pre-installation instructions .................... 3 Glossary ..........................................
CONGRA TULA TIONS... ... on your purchase of a MTX powered home subwoofer system. Your new subwoofer is one of the most exciting home entertainment electronic products available, adding impact and realism to recorded music and the wide variety of movies to be found on videotape, laser disc, DVD and off- the-air broadcasts.
UNP ACKING/PRE-INST ALLA TION INSTRUCTION Unpack your new subwoofer carefully , keeping the carton and packing material for future use. Check the condition of your unit, reporting any damage which may have occurred in transit to your dealer or shipping company .
9 Installation using line level inputs A) Using a preamp or receiver with line level outputs. If a preamplifier output is available on your receiver , or you have a preamplifier , connect it to the stereo line level RCA type input jacks on your subwoofer .
8 B) For amplifiers with two sets of speaker connections. An alternate method of connecting your subwoofer and main speakers is possible if you have a receiver or amplifier that can accommodate two sets of speakers that can be switched on at the same time and be connected in parallel.
PLACEMENT OR POSITIONING Y our new subwoofer will work well in a variety of locations. However , placement in your listening room will affect its performance. Since the wavelengths of sound reproduced by your subwoofer are large compared to its size, those sounds are omni-directional in nature.
An important point after buying a device MTX SW2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MTX SW2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MTX SW2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MTX SW2 you will learn all the available features of the product, as well as information on its operation. The information that you get MTX SW2 will certainly help you make a decision on the purchase.
If you already are a holder of MTX SW2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MTX SW2.
However, one of the most important roles played by the user manual is to help in solving problems with MTX SW2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MTX SW2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
