Instruction/ maintenance manual of the product JackHammer MTX
Go to page of 9
MTX.COM OWNER’S MANU AL.
MTX.COM SPECIFICA TIONS INTRODUCTION Thank you for choosing MTX to help you reach your ultimate goal with your vehicle. The MTX JackHammer is a true 22" subwoofer with power and performance beyond anything ever attempted in the mobile audio world.
MTX.COM For Vented Enclosures The JackHammer requires a volume of 8.7 cubic ft (net) per woofer . The woofer’s displacement is 1.8 cubic ft. The port’ s internal dimensions are 24- 1 ⁄ 8 " x 3- 3 ⁄ 16 " x 10" and it takes approximately .
MTX.COM WIRING OPTIONS Often overlooked, the installation components used to connect the entire system need to match the maximum capability of the system or you will lose performance. MTX Audio recommends using StreetWires 4 AWG cable as the speaker wire.
MTX.COM PHASE 0 180 180 0 PHASE 0 180 CA P + + B A T T RE M -GN D C AP - 1/0 AWG 1/0 AWG 16 AWG 4 AWG 4 AWG Amplifier driving JackHammer’ s negative terminal of 2nd V oice Coil Amplifier driving Jac.
MTX.COM 5. Check to be sure all connections are made and the impedance is within range. Once everything is setup correctly, supply the amplifi ers with the 12 volts of power from the batteries. STRAPPING TWO T A81001 AMPLIFIERS PER VOICE COIL It is also possible to connect four T A81001 amplifi ers by strapping two TA81001s per voice coil.
MTX.COM PISTON CHANGE (RE-CONE KIT) Along with the excessive SPL, MTX has created a replaceable cone assembly so the competition level of bass (done with the dual 2 Ω voice coils) can be switched out with a dual 4 Ω voice coil for every day listening with increased sonic quality and still be the same speaker with excessive high SPL.
MTX.COM NOTES: NO TES:.
© 2005 MTX. All rights reserved. MTX, Thunder , JackHammer and StreetWires are trademarks of Mitek. Designed and Engineered in the U.S.A. Due to continual product development, all specifi cations are subject to change without notice. MTX Audio, 1 Mitek Plaza, Winslow , IL 61089 U.
An important point after buying a device MTX JackHammer (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MTX JackHammer yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MTX JackHammer - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MTX JackHammer you will learn all the available features of the product, as well as information on its operation. The information that you get MTX JackHammer will certainly help you make a decision on the purchase.
If you already are a holder of MTX JackHammer, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MTX JackHammer.
However, one of the most important roles played by the user manual is to help in solving problems with MTX JackHammer. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MTX JackHammer along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
