Instruction/ maintenance manual of the product TA92001 MTX Audio
Go to page of 7
T A92001 Owner’ s Manual Introduction Thank you for choosing MTX to help reach the ultimate goal with your vehicle. Adding MTX amplifi ers and matching MTX speakers and subwoofers with StreetWires connections will put you in a better position to hear , feel, and experience all of the music the artist intended.
• Smart-Engage™ Auto-T urn-On – An auto-turn-on circuit is included within the amplifi er . A remote turn-on wire is not necessary when connecting the amplifi er’ s high level input to a high-powered source unit (car stereo). The amplifi er will automatically turn on when music is received through this type of connection.
Before Starting MTX recommends that you have your new Thunder amplifi ers installed by an authorized MTX retailer , preferably MECP certifi ed. If you do decide to do it yourself, make sure you have.
1) Label the fi rst amplifi er as the Positive amp. Then set the phase switch on this amp to the 0 degree setting. Now label the second amplifi er as the Negative and set the phase switch on that amplifi er to the 180 degree setting. 2) The interconnects coming from the source unit need to be split into each of these two amplifi ers.
No te: When strapping two of these amplifi ers, it is important to remember that in order to get the desired power out of them, you have to supply them with the power they need. With the current draw these amplifi ers are capable of pulling, we at MTX highly suggest upgrading to a dual alternator setup at 600 A.
4. Setting the 20Hz–50Hz, 12dB V ariable Subsonic Filter – This feature will help remove some of the potentially damaging low frequencies from your subwoofer system. By turning this control all the way counter -clockwise you are limiting the signal below 20Hz.
T rouble Shooting Read this if you want to be a do-it-yourselfer or give us a call at 800-CALLMTX. PROBLEM CAUSE SOLUTION No LED indication No +12V at remote connection Supply +12V to terminal No +12V.
An important point after buying a device MTX Audio TA92001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MTX Audio TA92001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MTX Audio TA92001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MTX Audio TA92001 you will learn all the available features of the product, as well as information on its operation. The information that you get MTX Audio TA92001 will certainly help you make a decision on the purchase.
If you already are a holder of MTX Audio TA92001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MTX Audio TA92001.
However, one of the most important roles played by the user manual is to help in solving problems with MTX Audio TA92001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MTX Audio TA92001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
