Instruction/ maintenance manual of the product TA81001 MTX Audio
Go to page of 6
T A81001 Owner’ s Manual Introduction Thank you for choosing MTX to help reach the ultimate goal with your vehicle. Adding MTX amplifiers and matching MTX speakers and subwoofers with StreetWires connections will put you in a better position to hear , feel, and experience all of the music the artist intended.
• Smart-Engage™ Auto-T urn-On - An auto-turn-on circuit is included within the amplifier . A remote turn-on wire is not necessary when connecting the amplifier’ s high-level input to a high-powered source unit (car stereo). The amplifier will automatically turn on when music is received through this type of connection.
Installation Mounting Place your Thunder amplifier at the predetermined mounting location. Use a felt pen to mark the exact position of the mounting holes on the mounting surface.
Running two amplifiers strapped will require “gain matching.” This will require source material that includes test tones and volt ohm/multi meter . Please see “Adjusting the Gain Controls” Note: Please pay attention and make sure the speakers or woofers are the correct IMPEDANCE (OHMS) BEFORE attaching to the amplifier .
X1 POSITION: 100mV–1V (T ypically for RCA Input) • Setting for Factory (OEM) Source Units: T o check the amount of voltage that is present from the source unit, take a multi meter , or a volt/ohm meter , on the AC setting, (range from 100mV up to 10 volts) attach the positive and negative leads directly to any exposed speaker .
• Setting the Frequency: Begin listening for the loudest musical spot or range within the bass range of your sound system. Adjust the center frequency to match this point. For most systems, the best center frequency adjustment will be between 40-50Hz.
An important point after buying a device MTX Audio TA81001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MTX Audio TA81001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MTX Audio TA81001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MTX Audio TA81001 you will learn all the available features of the product, as well as information on its operation. The information that you get MTX Audio TA81001 will certainly help you make a decision on the purchase.
If you already are a holder of MTX Audio TA81001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MTX Audio TA81001.
However, one of the most important roles played by the user manual is to help in solving problems with MTX Audio TA81001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MTX Audio TA81001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
