Instruction/ maintenance manual of the product AOM703 ASA Electronics
Go to page of 13
AOM703 7” FLA T P ANEL COLOR OBSER V A TION MONITOR OWNER'S MANUAL AOM703 Features: – 7” High Performance Color LCD Monitor – W ater Resistant Design – Built-in Audio Speaker with V olu.
2 Important! – Please Read This Manual Befor e Installing! Congratulations on your purchase of a V oyager AOM703 LCD Observation Monitor . W ith proper installation and use, your AOM703 is designed to provide you with years of trouble-free operation.
3 P ACKING CONTENTS: SPLIT GROMMET 1” O.D. 3/16 I.D. QTY . 1 DIST ANCE MARKER STICKER QTY .1 4” BLACK WIRE TIE QTY . 4 90 DAY/ 12 MONTH LIMITED WARRANTY.
1. Power/S tand-By mode: The Power / Stand-By button has two possible operation modes. a. Manual mode - T urned on manually by the user by pressing the Power button. b. Stand-By mode -T urned on by a stand-by trigger wire generally connected to the vehicles 12V reverse back up lights or turn signals.
The power button features dual-illumination (bright and dim). In installations where the unit is not wired for Stand-by operation and power is applied to the unit, the Power Button will dimly glow when the unit is off, allowing the user to easily find the control in low light.
INST ALLA TION INSTRUCTIONS BEFORE YOU BEGIN INST ALLA TION: Before drilling, be sure that no cable or wiring is on the other side. Clamp all wires securely to reduce the possibility of them being damaged during installation and use. Keep all cables away from hot or moving parts, and electrically noisy components.
5. Use the template provided on page 10 for proper placement of the junction box mounting holes. Use the #8 self-drilling screws (included) to secure the junction box in the desired location. The junction box can also be mounted using the 2”x 4” velcro strip (included).
8 A/V 2 POWER A/V 1.
REAR OBSER V A TION INST ALLA TION DIST ANCE MARKER USE/INST ALLA TION - PLACE INDICA TOR MARKERS (CONE, BOX ANY REFERENCE OBJECT HANDY) BEHIND VEHICLE AS IN FIGURE A. - PLACE RANGE MARKER DECALS ON SCREEN OF MONITOR OVER IMAGE OF INDICA TOR MARKERS ON GROUND BEHIND VEHICLE, AS VIEWED ON THE MONIT OR SCREEN.
JUNCTION BOX MOUNTING TEMPLA TE 175mm 155mm 30.4mm 10mm 5mm 14.8mm 9mm 60mm 10mm 10.
P ANA VISE MOUNT TEMPLA TE (OPTIONAL ACCESSOR Y) ® 2.00 0.25 0.25 0.25 2.50 2.00 2.50 11.
TROUBLESHOOTING No power Video/No audio Monitor does not activate in S tandby reverse trigger Negative/dark video image No video/no audio V ehicle battery drained No +12V accessory , No ground, mis-wi.
PRODUCT SPECIFICA TIONS LCD panel specifications: Size/T ype Contrast Ratio V iew Angles (@ CR ³ 10) Back light T ype Back light Life 7” (diagonal) /TFT LCD Brightness 350 nit (min) 420 nit (typ.) Response T ime 200 (min) 300 (typ.) T op (12 o’clock): 30 ° (min) Bottom (6 o’clock): 50 ° (min) Horizontal: ± 50 ° (min) Rise: 12ms (typ.
An important point after buying a device ASA Electronics AOM703 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ASA Electronics AOM703 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ASA Electronics AOM703 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ASA Electronics AOM703 you will learn all the available features of the product, as well as information on its operation. The information that you get ASA Electronics AOM703 will certainly help you make a decision on the purchase.
If you already are a holder of ASA Electronics AOM703, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ASA Electronics AOM703.
However, one of the most important roles played by the user manual is to help in solving problems with ASA Electronics AOM703. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ASA Electronics AOM703 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
