Instruction/ maintenance manual of the product 190-833-OEM MTD
Go to page of 12
OPERA T OR'S MANUAL 46" SNOW BLADE Model Numbers 190-833-OEM MTD PRODUCTS INC. P .O. BOX 368022 CLEVELAND, OHIO 44136-9722 IMPORT ANT : READ SAFETY RULES AND INSTRUCTIONS CAREFULL Y PRINTED IN U.
2 RULES FOR SAFE OPERA TION Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when operating equipment. 1. Read the tractor and snow blade owners manuals and know how to operate your tractor before using tractor with snow blade attachment.
3 A 1 Hex Bolt, 3/8" x 3-1/2" B 1 Hex Bolt, 1/4" x 3-1/4" C 8 Hex Bolt, 3/8" x 1" Lg. D 6 Hex Bolt, 5/16" x 1" Lg.
4 PREPARING THE LAWN TRACTOR Figure 1 CAUTION: Before beginning preparation, select a firm and level surface which is large enough to accommodate the snow blade attachment and tractor. Engage brake lock. 1. Allow engine, muffler and exhaust deflector to cool before beginning.
5 Figure 5 3/8" PALNUT PIVOT PLATE SPRING MOUNT ROD 3/8" PALNUT 14. Using a hammer, assemble a 3/8" palnut onto one end of the spring mount rod.
6 3/8" FLANGED NUT 3/8" x 1" HEX BOL T 18. Arrange the angle support brackets as shown in figure 8. Assemble the angle support brackets to the pivot support bracket using four 3/8" x 1" hex bolts and 3/8" flanged nuts. Figure 8 3/8" FLANGED NUT 3/8" x 1" HEX BOL T Figure 9 19.
7 21. Insert the end of the lower lift handle assembly through the notch in the pivot support bracket and through the holes in the channel. Align the lift link pin with the hole in the welded bracket on the lower lift handle assem- bly. Insert the lift link pin through the hole in the bracket and secure it with a 3/32" hair cotter pin.
8 SECTION 2: OPERA TING THE BLADE SECTION 3: ADJUSTMENTS CAUTION: Always lower blade to ground before leaving tractor. The lift handle, located on the left side of the snow blade, is used to raise and lower the blade. Pulling the lift handle all the way back raises the snow blade.
9 NOTES.
10 REP AIR P ARTS LIST FOR MODELS 190-833-OEM 46" SNOW BLADE B B A A 3 8 10 35 35 31 34 51 15 14 19 20 44 37 43 24 25 11 21 17 13 12 26 4 5 4 4 7 6 6 6 50 C 52 2 1 22 45 48 49 33 38 24 18 30 46 3.
11 REF. PART QTY. DESCRIPTION NO. NO. 1 63821 1 Blade - 46" 2 24524 1 Wear Plate - 46" 3 62980 1 Reinforcement Plate Assembly 4 43080 8 Bolt, Carriage 5/16-18 x 3/4" 5 44326 2 Bolt, Car.
1-800-800-7310 If you are having difficulty assembling this product or if you have any question regarding the controls, operation or maintenance of this unit, please call the Customer Support Department.
An important point after buying a device MTD 190-833-OEM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MTD 190-833-OEM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MTD 190-833-OEM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MTD 190-833-OEM you will learn all the available features of the product, as well as information on its operation. The information that you get MTD 190-833-OEM will certainly help you make a decision on the purchase.
If you already are a holder of MTD 190-833-OEM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MTD 190-833-OEM.
However, one of the most important roles played by the user manual is to help in solving problems with MTD 190-833-OEM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MTD 190-833-OEM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
