Instruction/ maintenance manual of the product TN-5308 Moxa Technologies
Go to page of 13
Moxa T oughNet Switch TN-5308 Series Layer 2 M 12 unmanag ed Ethern et switch es Hardware Installation Guide First Edition, May 2009 © 2009 Moxa Inc. All rights reserved.
— 1 — Overview The ToughNet TN-5308 series M12 un m anaged Ethernet switches are designed for industrial applications in harsh environments. T he TN series switches use M12 connectors to ensu re tight, robust connections, and guarantee reliable operation against envi ronm ental disturbances, such as vibration and shock.
— 2 — TN-5308-L V Panel Layout s Front Panel View Rear Panel View 1 2 3 4 4 44 4 4 5 6 7 7 8 9 10 11 1. TP port’s 10/100 Mbps LED 2. 10/100BaseT(X) port (female 4-pin shielded M12 connector with D coding) 3.
— 3 — TN-5308-MV Panel Layout s Front Panel View Rear Panel View 1 2 3 4 4 44 4 4 5 6 7 7 8 9 10 11 1. TP port’s 10/100 Mbps LED 2. 10/100BaseT(X) port (female 4-pin shielded M12 connector with D coding) 3.
— 4 — Mounting Dimensions (unit = mm) TN-5308-LV Side View Front View Rear View DIN-Rail Mounting Kit TN-5308-MV Side View Front View Rear View DIN-Rail Mounting Kit.
— 5 — Panel/W all Mounting Mounting the TN-5308-LV/MV on the wall requires 3 screws. Please use the 3 screws packed in the panel mounting kit. STEP 1: Prepare the 3 screw holes o n the wall according to the positions of the 3 screw holes on the switch shown on the mounting dimension diagram .
— 6 — Wiring Requirement s WARNING Turn the power off before disconnecting m odules or wires. The correct power supply voltage is listed on the product label. Check the voltage of your power source to make sure you ar e using the correct voltage. Do NOT use a vo ltage greater than what is specified on the product label.
— 7 — ATTENTION This product is intended to be mounted to a well-grounded mounting surface such as a metal panel. Connecting the Power Supply The M12/M23 A-coded 5-pin m ale connector on the TN-5308-L V /MV front panel is used for the DC power input.
— 8 — Connecting the Dat a Lines 10/100BaseT(X) Etherne t Port Connection All TN-5308 models have 8 10/100BaseT( X) Ether net ports (4-pin shielded M12 connectors with D coding). The 10/100TX ports located on the TN-5308’s front panel are used to connect to Ethernet-enabled devices.
— 9 — M12 (4-pin, M) to M12 (4-pin, M ) Straight-Trough Ca ble Wiring Tx+ Rx+ Tx- Rx- Straight-through Cable Wiring 1 2 3 4 1 2 3 4 Rx+ Tx+ Rx- Tx- M12 (4-pin, M) to RJ45 (8-pin) Cross-Over Cable .
— 10 — Dual Speed Functionality & Switching The TN-5308’s 10/100 Mbps switched M12 ports auto negotiate with the connected device to use the fastest da ta transmission rate supported by both devices. All of Moxa’s ToughNet switches are plug-and-play devices, so that software configuration is not requir ed.
— 11 — Auto-Negotiation and Speed Sensing All of the TN-5308’s Ethernet ports independently sup port auto-negotiation for speeds in the 10BaseT and 100Bas eTX modes, with operation according to the IEEE 802.3u standard. This mean s that some nodes could be operating at 10 Mbps, while at the same time , other nodes are operating at 100 Mbps.
— 12 — Weight TN-5308-L V: 485 g TN-5308-MV: 685 g Installation Panel mounting, DI N-Rail mounting (with optional kit) Environmental Limits Operating Temperature Standard Models: 0 to 60°C (32 to 140°F) Wide Temp.
An important point after buying a device Moxa Technologies TN-5308 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Moxa Technologies TN-5308 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Moxa Technologies TN-5308 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Moxa Technologies TN-5308 you will learn all the available features of the product, as well as information on its operation. The information that you get Moxa Technologies TN-5308 will certainly help you make a decision on the purchase.
If you already are a holder of Moxa Technologies TN-5308, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Moxa Technologies TN-5308.
However, one of the most important roles played by the user manual is to help in solving problems with Moxa Technologies TN-5308. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Moxa Technologies TN-5308 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
