Instruction/ maintenance manual of the product EDS-205 Moxa Technologies
Go to page of 10
Moxa EtherDevice Switch EDS-205 Hardware Installation Guide Third Edition, June 2008 © 2008 Moxa Inc., all rights reserved. Reproduction without permission is pr ohibited.
Overview The Moxa EtherDevice™ Switches, ED S-205 series, are entry-level 5- por t Ethernet Switches that provide a cost -effective solution for y our industrial Ethernet connection. For EDS-205, you could choose either DC power input from 12 to 48 V or AC power input from 18 to 30V.
Panel Layout of EDS-205 Serieseries 5 4 3 2 1 100 10 P 24 VAC 24 VDC V+ T op View 1 Front View Rear View 2 3 4 5 6 8 7 2 1. Heat dissipation orifices 2. Terminal block for power input and grounding 3. Moxa Logo 4. Power input LED 5. 10/100BaseT(X) Port 6.
Mounting Dimensions DIN-Rail Mounting The plastic DIN-Rail attachment plate should already be fixed to the rear panel of EDS when you take it out of the box. If you need to reattach the DIN- Rail attachment plate to EDS, make sure the DIN-Rail kit is situated towards the top, as shown in the figures below.
T o remove Moxa EDS-205 from the DIN-Rail, inser t a flat- blade screw driver horizon tally into the DIN-Ra il kit under the EDS-205, and then pull it upwa rds and re lease EDS tow ards you away fr om the DIN-R ail. Wiring Requirements Saf ety Fi rst! Be sure to disconnect the power cord before installing and/or wiring your Moxa EtherDevice Switch.
Grounding Moxa EtherDevice Switch Grounding and wire routing help limit the effects of noise due to electromagnetic interference (EMI). Run the ground connection fr om the right most of 3-contact term inal block to the gr ounding surface prior to connecting devices.
Communication Connections EDS-205 has five10/100BaseT(X) Ethernet ports. 10/100BaseT(X) Ethernet Port Connection The 10/100BaseT(X) ports located on EDSS’s front panel are used to connect to Ethernet-enabled devices.
LED Indicators The front panel of Moxa EtherDevice Sw itch contains several LED indicator s. The function of each LED is described in the table below. LED Color State Description On Power is being supplied to power input. P AMBER Off Power is not being supplied to power input.
Switching and Address Learning Moxa EtherDevice Switch has an addre ss table that can hold up to 1K node addresses, which makes it suitable for use with large networks.
Regulatory Approvl Safety UL508 EMI FCC Part 15, CISPR (EN55022) class A EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT ), EN61000-4-5 (Sur ge), EN61000-4-6 (CS), Shock IEC 60068-2-27 Free Fall IEC 60068-2-32 Vibration IEC 60068-2-6 WARRANTY 5 years T echnical Support Contact Information www.
An important point after buying a device Moxa Technologies EDS-205 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Moxa Technologies EDS-205 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Moxa Technologies EDS-205 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Moxa Technologies EDS-205 you will learn all the available features of the product, as well as information on its operation. The information that you get Moxa Technologies EDS-205 will certainly help you make a decision on the purchase.
If you already are a holder of Moxa Technologies EDS-205, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Moxa Technologies EDS-205.
However, one of the most important roles played by the user manual is to help in solving problems with Moxa Technologies EDS-205. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Moxa Technologies EDS-205 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
