Instruction/ maintenance manual of the product CSM 200 Moxa Technologies
Go to page of 9
CSM-200 Series Hardware Inst allation Guide First Edition, November 2009 © 2009 Moxa Inc. All rights reserved. Reproduction without permission is pr ohibited.
- 2 - Overview Introduction The CSM-200 seri es is an Ethernet to optical fibe r media conve rter and is part of the NRack System. It provides Ethe rnet media conversion from 10/100 BaseT( X ) to 100 BaseF X (SC or ST con n ectors), and can be installed in every chassis of the NRack System.
- 3 - Features y LFP(Link Fault Pass-through) and FEF(Far End Fault) y Two different operation modes ¾ Store-and-Forward ¾ Pass Through y Auto negotiation y Support TS-100 0 ver. 2 y Support Turbo R ing 2 y Plug and Play y Hot-swap Package Checklist Moxa’s CSM-200 Series is shipped with the foll owing items .
- 4 - CSM-200-1214/C SM-200-1218 1 17.1 mm (4.61 in) 124.3 mm (4.89 in) 86.8 mm (3.42 in) 21 mm (0.83 in) PWR Fiber Link TX 10M 100M RX ATTENTION Electrostatic Discharge Warning! To protect the product fr om damage due to electrostatic discharge, we reco mmend wearing a gro unding device when handling your CSM -200 slide-in modules.
- 5 - RJ45 (8-pin) to RJ45 (8 -pin) Straight-Thro ugh Cable Wiring Straight-Through Cable RJ45 Plug Pin 1 Switch Port RJ45 Connector RJ45 Connecto r Tx+ Tx- Rx+ Rx- NIC Port Cable Wiring 3 3 6 6 1 1 2.
- 6 - ATTENTION This is a Class 1 Laser/LED product. Do not stare into t he Laser Beam. Switch Settings There is 1 set of DIP switches on th e board. The followi ng figure and table give the settings for t he 5-connector DIP switch.
- 7 - Auto MDI/MDI-X Connection The Auto MDI/M DI-X function allows users to connec t the Moxa CSM-200’s 10/100BaseTX ports to any kind of Et hernet device, with out needing to determine the type of E thernet cable being used for the connection.
- 8 - Specifications Technology Standards IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), 100BaseFX Interface RJ45 ports 10/100BaseT(X) Fiber ports 100BaseFX (SC/ST connector) LED Indicators PWR, Fiber Link, 10/100M(TP port ) Optical Fiber 100BaseFX Multi-mode Single-mode Wavelength 1300 nm 1310 nm Max.
EMS EN61000-4-2 (ESD), C riteria A, Lev el 4 EN61000-4-3 (R S), Criteria A, L evel 2 EN61000-4-4 (EFT), C riteria A, L evel 3 EN61000-4-5 (Su rge), Criteria A, L evel 3 EN61000-4-6 (C S), Criteria A, L evel 2 En61000-4-8 (PFMF), C riteria A, Level 3 Freefall IEC 60068-2-3 2 Warranty Warranty Period 5 years Details: See www.
An important point after buying a device Moxa Technologies CSM 200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Moxa Technologies CSM 200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Moxa Technologies CSM 200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Moxa Technologies CSM 200 you will learn all the available features of the product, as well as information on its operation. The information that you get Moxa Technologies CSM 200 will certainly help you make a decision on the purchase.
If you already are a holder of Moxa Technologies CSM 200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Moxa Technologies CSM 200.
However, one of the most important roles played by the user manual is to help in solving problems with Moxa Technologies CSM 200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Moxa Technologies CSM 200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center