Instruction/ maintenance manual of the product TMO-39084A Montgomery Ward
Go to page of 24
.
11 11 14 16,18,20,21,22 .17,18,19,20,21,22 BackCover Safe Operation Practices. Assembly. Controls. Operation. How To UseY our Tiller Adjustments. Instructions given with this symbol are for per. sonal safety. Be sure to follow them. NOTICE: A data plate with the model number and serial numbers of your unit is located on the tine shield.
, ~ WARNING ~ ' To reduce the potential for any injury, comply with the following safety instructions. Failure to comply with the instructions may result in personal injury. 1. It is suggested that this manual be read in its entirety before attempting to assemble or operate this unit.
ASSEMBLY o-J1 E-i c NOTE This unit is shipped WITHOUT GAS- OLINE or OIL. After assembly, see separate engine manual for proper fuel and engine oil recommenda-tions. :jlllR-ir ., H-@ @ @ @S--@JN-@@~~ I ~ @ @ @ T- e o-@ ~ @ ~ L , U--@ v ---~ p (:!;)(~~ ~ Q-~@@@ FIGURE 1.
Flat Washer -(8) Ball Knob (C) Hex Bolt (A) ~ I ~ e~ #) Depth Bar Assembly --. ~ ~ Hairpin Cotter' (E) , 2. Insert clevis pin (0) through the tine shield and depth bar assemblies. Secure with hairpin~cotter (E). See figure 4. 3. Insert hex bolt (A) into the upper hole of the depth bar assembly.
3. Mount the handle panel (AC) to the handles. Secure with carriage bolts (M), lock washers -(N) and hex nuts (0). See figure 7. NOTE To align the holes in the handle panel and the handle, it may be necessary to loosen the cable brackets which are mounted to the back of the handles with self- tapping screws.
2. Hook the "Z" end of tine clutch cable into the hole in tine clutch lever. 3. With the clutch lever released (in the "up" position), adjust the bottom nut at the cable bracket so there is only a slight amount of slack in the control wire.
6. Secure drive clutch lever to weld bolt with rub- ber washer (T), flat washer (U) and hex lock nut.,(V). See figure 13. Tighten hex nut. 7. Place the drive clutch lever in the neutral (N) position. Adjust the cables at the cable bracket so that the cables are tight, then tighten the hex nuts against the cable bracket.
3. Move choke lever to "CHOKE" position. NOTE Engine is shipped without oil. BEFORE STARTING 1. Before operating tiller for the first time or if tines have been removed and reassembled for any reason, check to be certain the tines are assembled correctly.
Do not push down on the handles so that the wheels are lifted off the ground while the tine clutch is en- gaged, or the tiller could move back- ward and cause personal injury. For best results, it is recommended the garden be tilled twice (lengthwise, then widthwise) to pulverize the soil.
CARBURETOR ADJUSTMENT Never make unnecessary adjustments. The fac- tory settings are correct for most applications. If adjustments are needed, refer to the separate engine manual packed with your tiller.
If belt replacement is required, order belt or belts by part number from your nearest authorized dealer. Part No. 754-0195 Tine Belt (1/2" X 54" Long) Part No. 754-0190 Reverse Drive Belt (V2" x 39" Long) Part No. 765-0109 Forward Drive Belt (V2" x 43" Long) 1.
Wheel Chain Case Pulley / 1-1 Small I Pulle L ) J ~ Wheel Chain Case Pulley Forward .~ve Belt rSOl~1 tr' If, J/- '",. ~ " ~ ~' '~ -~ : -;') '" 6) {2) ~~ ~ ~L < .
FIGURE 27. NOTE If the "V"-idler or flat idler pulleys are removed for any reason, be sure to install with hub side against the idler bracket.
SYMPTOM POSSIBLE CAUSE(S) SOLUTION Engine fails to start 1. Check fuel tank for gas.2. Spark plug lead wire disconnected.3. Faulty spark plug. 1. Fill tank if empty. 2. Connect lead wire. 3. Spark should jump gap between control electrode and side elec- trode.
A A 2 -, (=:J~~3 / --71 ~, '6 ~ I ,68 78- , 94 / 69 / /' /' '" / /, '" '" 73- Q --- 72 '1!!!1J 64. 23, 17" 77 75 86 / '.- " 1 2 ' Ii'. I . 62 ! (- KJ -1 I / ')Ii 61 ~ I I , 18 / J.
REAR TINE TILLERS PARTS LIST FOR MODELS TMO.39083A AND TMO.39084A --- REF. NO. 1 2 3 4 5 7 9 10 PART COLOR NO. CODE 710-0299 720-0180 747-0517 712-0117 710-0458 784-0031 15093 710-0607 NEWI ~ REF. NO. 46 47 48 49 50 51 52 53 54 55 56 57 58 59 PART COLOR NO.
REAR TINE TILLERS PARTS LIST FOR MODELS TMO.39083A AND TMO.39084A I REF. NO. NEW I REF.! ~~ PARTlcOLOR ~ CODE I NEW PART DESCRIPTION DESCRIPTION 1 PART COLOR NO.
59 714-0388 60 61 62 63 64 750-0551 712-0267 736-0119 712-0267 736-0185 50 756-0389 51 756-0405 65 66 67 68 52 756-0464 53 756-0313 54 I 69 710-0237 Idler Brkt. Ass'y.- Tines Shld. Bolt. .500" Dia. x .215" Lg. #61 Hi-Pro-Key 3/16" x 5/8" Dia.
)8 ., ,.2 3-? ~ '~ . I. , -; ~ ~~ '" '", , ~ ~~,~ ,/,- Lv .'- ",>J ~ !Jf"'" ~'-- '<.:- 36 ~ f{. , 26 :- ~..Jt~~ ~~~[ ,"'/($ . 2' ~v 1 ~ I 23 '9 2' '8 / 25 ( ~ ~~ , Jt 29 28 ~ 27 REAR TINE TILLERS PARTS LIST FOR MODELS TMO.
.
2829 I_V t/ 2 ,..10 TILLER CHAIN CASE (WHEELS) fARTS LIST FOR MO~iMO.39083~D TMO.39~ !REF. I PART I COLOR NO. NO. CODE I NEW ! REF. , PART NO. PART I COLOR I NO.
Heavy Duty Rear Tine Garden Tiller Attachments Available for All-Season Use 31-0110 8" Furrower Opener 31-0144 "V".Bar Cultivating Kit (Must be used with 31-0178 adapter) Kit Includes: "V"-Bar Frame, 4-Point Cultivating Tines, Hiller/Furrower, Depth Gauge Wheels (Pair).
HOW TO OBTAIN REPLACEMENT PARTS AND SERVICE The merchandise you have purchased from us has been carefully engineered and manufactured under Wards rigid quality standards and should give you satisfactory and dependable operation. However, like all mechanical merchan-dise, It may occasionally require adjustment, replacement parts or maintenance.
An important point after buying a device Montgomery Ward TMO-39084A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Montgomery Ward TMO-39084A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Montgomery Ward TMO-39084A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Montgomery Ward TMO-39084A you will learn all the available features of the product, as well as information on its operation. The information that you get Montgomery Ward TMO-39084A will certainly help you make a decision on the purchase.
If you already are a holder of Montgomery Ward TMO-39084A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Montgomery Ward TMO-39084A.
However, one of the most important roles played by the user manual is to help in solving problems with Montgomery Ward TMO-39084A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Montgomery Ward TMO-39084A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
