Instruction/ maintenance manual of the product 314 Datalogging Humidity Temperature Meter Monarch
Go to page of 8
MONARCH INSTRUMENT 15 Columbia Drive Amherst, NH 03031-2334 USA Phone: (603) 883-3390 Fax: (603) 886-3300 E-mail: support@monarchinstrument.com Website: www .
Safeguards and Precautions 1 . Read and follow all instructions in this manual carefully , and ret ain this manual for future reference. 2. Do not use this instrument in any manner inconsistent with these operating instructions or under any conditions that exceed the environmental specifications stated.
MODEL 314 DA T ALOGGING HUMIDITY TEMPERA TURE METER T able of Contents Section Page 1.0 Introduction ................................................................................................................. 1 2.0 Specifications ...............
MODEL 314 DA T ALOGGING HUMIDITY TEMPERA TURE METER 1 1.0 Introduction This instrument is a dual channel, recording digital Humidity / T emperature meter providing simultaneous display of ambient humidity and temperature on the first channel, and a wide range temperature only measurement on the second channel.
MODEL 314 DA T ALOGGING HUMIDITY TEMPERA TURE METER 2 3.0 Symbol Definitions and F eature Locations: : Low battery indication. Battery voltage is not suf ficient for proper operation.
MODEL 314 DA T ALOGGING HUMIDITY TEMPERA TURE METER 3 4.0 Operating Instructions: 4.1 Prep aration for Measurement Measurement of ambient humidity and temperature (T1) ma y be made with the probe clipped to the instrument or hand held remotely .
MODEL 314 DA T ALOGGING HUMIDITY TEMPERA TURE METER 4 4.8 Recording Inter val Setup T o set the recording interval: 1. Press and hold the MAX MIN button and then power on the meter . 2. Press HOLD (interval). 3. Press REC ( n ) or °C/°F ( p ) to increase or decrease the number .
MODEL 314 DA T ALOGGING HUMIDITY TEMPERA TURE METER 5 Appendix: Ther mocouple Probe Specificati ons Model Range T olerances Description TP-K01 Wire probe -50°C to 200°C -58°F to 392°F ±2.
An important point after buying a device Monarch Monarch 314 Datalogging Humidity Temperature Meter (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Monarch Monarch 314 Datalogging Humidity Temperature Meter yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Monarch Monarch 314 Datalogging Humidity Temperature Meter - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Monarch Monarch 314 Datalogging Humidity Temperature Meter you will learn all the available features of the product, as well as information on its operation. The information that you get Monarch Monarch 314 Datalogging Humidity Temperature Meter will certainly help you make a decision on the purchase.
If you already are a holder of Monarch Monarch 314 Datalogging Humidity Temperature Meter, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Monarch Monarch 314 Datalogging Humidity Temperature Meter.
However, one of the most important roles played by the user manual is to help in solving problems with Monarch Monarch 314 Datalogging Humidity Temperature Meter. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Monarch Monarch 314 Datalogging Humidity Temperature Meter along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
