Instruction/ maintenance manual of the product 9493 Monarch
Go to page of 8
TC9493VMOI Rev AA 12/08 ©2008 Avery Dennison Corporation. All Rights Reserved. MONARCH 9493™ VEHICLE MOUNT INSTRUCTIONS Using the vehicle mount, you can attach your Monarch Sierra Sport4™ 9493 printer to a forklift or other vehicle. This document describes how to install and use the vehicle mount with the printer.
2 USB cable Connecting the Communications Cables The printer uses either 9-pin serial communications or USB communications. For best results, use only Monarch® cables. 1. Open the hinged cable door on the side of the printer by loosening the two screws with a Phillips screwdriver.
3 Installing Overhead (Recommended) 1. Select a suitable location for the mount on your vehicle. 2. If using the mounting plate, center the mounting plate on your vehicle’s overhead rails. 3. Align the four holes in the vehicle mount with the holes in the mounting plate.
4 Installing Vertically or on a Tabletop 1. Select a suitable location for the mount on your vehicle. 2. If using the mounting plate, align the four holes in the vehicle mount with the holes in the mounting plate. 3. Use the four mounting screws and lock washers to attach the vehicle mount to your vehicle.
5 Attaching the Printer To attach the printer on the vehicle mount: 1. Use the M3 allen wrench to remove the plastic strap buttons on each side of the printer and replace them with the aluminum buttons included with the vehicle mount hardware. 2. Make sure the printer’s battery and communication cable are installed.
6 5. Plug the battery charging cable into the battery socket on the back of the printer. Reading the LEDs Three LEDs on the vehicle mount indicate the following activity: LED Indicators Status on powe.
7 Printing Refer to the printer’s documentation for information on loading supplies and printing. Replacing the Fuse The vehicle mount uses a 10-amp, 125-volt fuse (order part 127983). The fuse is located on the cable on the right side of the vehicle mount.
8 Electrical Specifications Output is electrically isolated from the input. Output common is not connected to the forklift module chassis. It can be jumpered internally to the chassis. Call Service for more information. For printer specifications, refer to the Operator’s Handbook .
An important point after buying a device Monarch 9493 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Monarch 9493 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Monarch 9493 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Monarch 9493 you will learn all the available features of the product, as well as information on its operation. The information that you get Monarch 9493 will certainly help you make a decision on the purchase.
If you already are a holder of Monarch 9493, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Monarch 9493.
However, one of the most important roles played by the user manual is to help in solving problems with Monarch 9493. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Monarch 9493 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
