Instruction/ maintenance manual of the product 1071-4833-121 Monarch
Go to page of 10
MONARCH INSTRUMENT 15 Columbia Drive Amherst, NH 03031-2334 USA Phone: (603) 883-3390 Fax: (603) 886-3300 E-mail: support@monarchinstrument.com Website: www .monarchinstrument.com Instruction Manual Phaser-Strobe Portable Stroboscopes Printed in the U.
Safeguards and Precautions 1. Read and follow all instructions in this manual carefully , and retain this manual for future reference. 2. Do not use this instrument in any manner inconsistent with these operating instructions or under any conditions that exceed the environmental specifications stated.
1.0 INTRODUCTION ..................................................................... 1 1.1 Direct Digital Synthesis ...................................................................... 1 1.2 Display Panel ..........................................
8.0 BA TTER Y AND POWER SUPPL Y SPECIFICS .................... 10 8.1 Displaying Battery Charge Percentage ............................................ 1 0 8.2 Low Battery Indication ....................................................................
Figure 1 Display Panel 1 1.0 INTRODUCTION The Phaser-Strobe is an extremely sophisticated instrument with many features never before available in a stroboscope, yet remains simple to operate.
2 ! ! ! ! ! ! ! ! ! ! Out In ! ! ! ! ! " " " " " Figure 2 Input/ Output Jacks Signal Input +6V Out to Sensor Common (GND) Common (GND) +6V Out to Sensor Signal Input Figure 3 Input Connector Connection Detail 2.
3 Signal Input Common (GND) Common (GND) Signal Input Figure 4 Output Connector Connection Detail W ith no external input, the output jack ( ! pointing away from socket) provides a TTL compatible pulse from the strobe’ s internal oscillator .
4 increment would exceed the maximum, eg 32,000 to 33,000, the display will not increment. Select a lower digit to increment. There are two ways/modes to select a new blinking digit: Knob 1 mode: Push and hold in the knob and turn to select a new digit.
5 Pressing the x2 or ÷2 buttons has no effect on operation. Pressing the DELA Y button will put the unit into one of the two External Delay modes as explained in the next section. 3.4 External Delay Modes – External Input Required There are two External Delay modes: Phase Delay and Time Delay .
6 2 . Press the MEMORY/AUT O button until “AUTO” is displayed. (When in the Auto mode , the ‘AUTO’ chevron is displayed.) When the “AUTO” chevron displayed, the secondary (white) button functions are active. These are STEP , RA TE, ON, and OFF .
An important point after buying a device Monarch 1071-4833-121 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Monarch 1071-4833-121 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Monarch 1071-4833-121 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Monarch 1071-4833-121 you will learn all the available features of the product, as well as information on its operation. The information that you get Monarch 1071-4833-121 will certainly help you make a decision on the purchase.
If you already are a holder of Monarch 1071-4833-121, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Monarch 1071-4833-121.
However, one of the most important roles played by the user manual is to help in solving problems with Monarch 1071-4833-121. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Monarch 1071-4833-121 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
