Instruction/ maintenance manual of the product 120-1469 Modulaire
Go to page of 9
Modulaire AM/FM Component Stereo System (120-1469) Controls Faxback Doc. # 18931 POWER SWITCH Depressing the white dot on the switch will turn the unit on, at which time the dial will illuminate. SELECTOR SWITCH This switch will select the program source that will be reproduced by your system.
BASS AND TREBLE These controls increase or decrease the bass and treble tones and should be set in accordance with listening preference, and room acoustics.
For AM, all that is usually required is a long piece of wire connected to the AM terminal. This may improve reception: however, it may also increase the noise level being picked up.
Modulaire AM/FM Component Stereo System (120-1469) Installation Faxback Doc. # 18932 POWER REQUIREMENTS Connect the AC line cord into any outlet furnishing 117 volts 50-60 cycles AC current. CONNECTING SPEAKERS Connect the speakers to the receiver by using the supplied cables.
Modulaire AM/FM Component Stereo System (120-1469) Specifications Faxback Doc. # 18933 BANDS MEDIUM WAVE (MW):........................................535 to 1605 KHz FM (FM):..................................................88 to 108 MHz CONTROLS TUNING CONTROL:.
Audio Connection Information (120-Series) Plug/Male 2 Ch. System Faxback Doc.# 19994 +----+--------------+---------------+------------+------------------------+ |Pin | | | | | |No.
(2CH/4CH SWITCHABLE UNIT) +----+--------------+---------------+------------+------------------------+ |Pin | | | | | |No. | WIRE COLOR | WIRE SPECS. | LABEL | REMARK | +----+--------------+-----------.
|Pin | | | | | |No. | WIRE COLOR | WIRE SPECS. | LABEL | REMARK | +----+--------------+---------------+------------+------------------------+ | 1 | WHT/BLK | AWG #20 | FRONT L- | STRIP SOLDER | | | | .
+---------+--------------+ | White | Right (-) | +---------+--------------+ | Brown | Left (+) | +---------+--------------+ | Gray | Left (-) | +---------+--------------+ | Red | +12 V Power | +------.
An important point after buying a device Modulaire 120-1469 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Modulaire 120-1469 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Modulaire 120-1469 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Modulaire 120-1469 you will learn all the available features of the product, as well as information on its operation. The information that you get Modulaire 120-1469 will certainly help you make a decision on the purchase.
If you already are a holder of Modulaire 120-1469, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Modulaire 120-1469.
However, one of the most important roles played by the user manual is to help in solving problems with Modulaire 120-1469. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Modulaire 120-1469 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
