Instruction/ maintenance manual of the product Stowaway Stowaway Bluetooth Keyboard Mobility Electronics
Go to page of 30
www.igo.com iGo ™ Stowaway ® Bluetooth ® Keyboard Owner’s Manual for Symbian UIQ Mobile Devices Keyboard Driver: 1.21 Stowaway Bluetooth Owner’ s Manual for Symbian UIQ Page 1.
Setting up the Keyboard ................................................. 3 Before You Begin .................................................................................... 3 Installing the Software ...............................................
Setting up the Keyboard Before You Begin Before you install the Stowaway keyboa rd software for Symbian UIQ mobile devices: ¾ Disable or remove any other keyboa rd applications that you have previously installed on your mobile device. (Refer t o the User’s Guide included with your mobile device for instruction on how to do this.
Keyboard Description Stowaway Bluetooth Owner’ s Manual for Symbian UIQ Page 4.
Configuring the Keyboard to your Device NOTE: The Bluetooth connection between the mobile device and keyboard must be set up through the Stowaway keyboard driver. 1. The main screen of the Stowaway keyboard application is the Status screen. The Status window gives you the keyboard connection status, battery and firmware information.
2. The status tab offers buttons to enable or disable your keyboard. To enable the Stowaway keyboard , make sure the keyboard is Discoverable by the mobile device. Press the Discoverable button on the keyboard until the green LED (above the <0> key) flashes once per second.
5. Next, type the same Passkey number on the Stowaway keyboard . When finished, press the <Enter> key on your keyboard. 6. If the Passkey is entered successfully on both devices, the message BT Keyboard Connected will appear. If the keyboard does not show up as connected: a.
UNSECURE CONNECTIONS 1. If you chose an Unsecured connection by removing the check mark at Options > Bluetooth Security option, connection is usually established within a few seconds after pressing the Discoverable button. If the connection is not completed, press the Discoverable button again.
2. In the Status window the keyboard battery information is displayed. The two states of the battery are: a. Normal – This is the most common state of the battery. b. Critical – This means the battery is in imminent danger of no longer functioning.
4. The Keys tab allows you to assign applications or files to open with the < Fn > + <number> shortcut. 5. About tab – Provides the version of t he Stowaway software inst alled on your mobile device. 6. Help – Application help is available from the Stowaway Keyboard menu > Help option.
Reconnecting the Stowaway keyboard The above steps establish the Blueto oth wireless connection and bonding between the mobile device and the ke yboard for the firs t time. Keyboard character input should be enabled as long as the connection is maintained.
Even when disconnected, the mobile device and the keyboard remain bonded. The keyboard will only reconnec t to the bonded mobile device and the mobile device will only listen to th e bonded keyboard. To break the bond press the Discoverable butto n for approximately 1 second or until the green LED flashes quickly.
Customizing Your Keyboard Keyboard Control Panel On the Status tab: ¾ The Status tab allows you to turn on/off access to the keyboard, and gives access to the other application features. Tap Enable BT to turn access on and Disable BT to turn access off.
Disabling the Stowaway keyboard When the Stowaway keyboard is no longer needed, you may disable the keyboard driver by tapping Disable BT on the Status tab. The BT Disabled message will then be displayed on the Status page. NOTE: Disabling the Bluetooth keyboard will not automatically turn off the Bluetooth radio.
Keyboard Status Light When the keyboard is open and the right panel is slid in, there is a light above the <0> key that indicate s the status of the keyboard. ¾ When the keyboard status light flas hes a fast green light (approx. once per second) it is in Discoverable mode .
Using the Stowaway keyboard Character Input • Commands joined by a dash “ – ” mean that the key combination must be pressed in order and with all keys held down at the same time. • Commands joined by a plus “ + ” mean that the key following the “ + ” must be pressed after the initial key combination is pressed and released.
International and Extended Character Set Character Description Shortcut å Dot accent <Ctrl> – <Shift> – <2> + <a> Å Dot accent <Ctrl> – <Shift> – <2>.
Frequently Asked Questions Q: My keyboard and handheld ar e in-range and powered on, why won’t they reconnect after a key press? A: The current Bluetooth settings on yo ur mobile device may preclude an automatic reconnection.
Legal Notices Mobility California, Inc. and its affiliate s shall not be liable for technical or editorial errors or omissions containe d herein or for special, indirect, incidental or consequential damages whatsoever in connection with the furnishing, performance, or use of th is material.
Warranty Mobility California warrants this produc t against defects in materials and workmanship under normal us e for a period of one (1) year from the date of original retail purchase.
Obtaining Warranty Service Customer must contact Mobility Califor nia within the applicable warranty period to obtain warranty service auth orization. Dated proof of original purchase will be required for warrant y service, repair, or replacement.
Important Battery Information • Keep battery away from children. • Always replace old, weak or worn-o ut batteries promptly and recycle or dispose of them properly. Be fore inserting a new battery, the battery compartment should be clea ned. If fluid from the battery comes into contact with skin or clot hes, flush with water immediately.
Important Notes about Bluetooth Devices The Stowaway keyboard can emit radio frequency (RF) energy whenever the green LED is flashing. Care should be taken when used around medical devices or equipment. For specific in formation, consult with the product manufacturer or your physician before use.
Wireless Regulatory Information The Stowaway device must be used in strict accordance with the manufacturer's instructions as describ ed in the user documentation that comes with the product. For country-spec ific approvals, see Radio approvals. Mobility California, Inc.
FCC Notices This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecti on against harmful interference in a residential installation.
FCC Identification Information The following information is provided on the device or devices covered in this document in compliance with FCC regulations: • Model number(s): STBT01 • Company name: Mobility Electronics, Inc. 9918 Via Pasar San Diego, California 92126 United States of America 1.
Europe – CE Declaration of Conformity EN 301 489-1 (2004), EN 301 489-17 (2002), EN 300 328-1 (2001), EN 300 328-2 (2001), EN 60950 (2001) English Hereby, Mobility California, In c. declares that this STBT01 is in compliance with the esse ntial requirements and other relevant provisions of Directive 1999/5/EC.
Swedish Härmed intygar Mobility Ca lifornia, Inc. att denna STBT01 står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
France Some areas of France have a restricte d frequency band. The worst case maximum authorized power indoors is: 10 mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz). 100 mW for frequencies between 2446.5 MHz and 2483.5 MHz (NOTE— Channels 10 through 13 inclusive operate in the band 2446.
Features and Technical Specifications • Small, foldaway design makes it easy to put in your pocket or briefcase. • Simple connection compatibility with your Mobile device via Bluetooth. • 5 row design for greatest comfort and ease of use. • Full size QWERTY keyboard layout for optimum comfort while typing.
An important point after buying a device Mobility Electronics Stowaway Stowaway Bluetooth Keyboard (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mobility Electronics Stowaway Stowaway Bluetooth Keyboard yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mobility Electronics Stowaway Stowaway Bluetooth Keyboard - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mobility Electronics Stowaway Stowaway Bluetooth Keyboard you will learn all the available features of the product, as well as information on its operation. The information that you get Mobility Electronics Stowaway Stowaway Bluetooth Keyboard will certainly help you make a decision on the purchase.
If you already are a holder of Mobility Electronics Stowaway Stowaway Bluetooth Keyboard, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mobility Electronics Stowaway Stowaway Bluetooth Keyboard.
However, one of the most important roles played by the user manual is to help in solving problems with Mobility Electronics Stowaway Stowaway Bluetooth Keyboard. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mobility Electronics Stowaway Stowaway Bluetooth Keyboard along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
