Instruction/ maintenance manual of the product VX-850 MK Sound
Go to page of 15
VX-860 VX-850 Miller & Kreisel Sound, Inc. 9351 Deering A venue Chatsworth, CA 91311-5858 USA (818) 701-7010 fax (818) 701-0369 www .mk sound.com ©2004 Miller & Kreisel Sound, Inc.
Please record the following information for your records: Serial Number: Date of Purchase: Dealer Name: Dealer Address: City/State/Zip: Country: Invoice Number: POWERED SUBWOOFER T ABLE OF CONTENTS 1. SAFETY INSTRUCTIONS...............................
POWERED SUBWOOFER 1. SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS - All safety and operating instructions should be read before this product is operated. 2. RET AIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference.
2. INTRODUCTION Congratulations! Y ou have just made perhaps the most exciting and dramatic addition that you could make to your audio or multichannel audio/video system. The new dimension of deep and powerful bass provided by your M&K VX-series powered subwoofer will thrill and excite you.
Ultimately , the amount and quality of bass you get in your room are dependent on the room itself. Low frequency bass sounds are affected most by the size of the room and the method of construction used to build it.
This will give you better bass quality than using the speaker inputs, because it bypasses your amp or receiver's amplifier stage. T o connect the subwoofer in this way , simply run one or a pair .
If you don't have a subwoofer output available, check to see if you have preamp outputs on your preamp, amp, or processor to be able to use these inputs. If you have only one set of preamp outputs, use a Y -connector to feed both the amplifier and the subwoofer .
2. Y ou can also connect your satellite speakers to the subwoofer . If you choose to do this, connect the amplifier to the "From Amplifier" terminals on the back of the subwoofer and connect the satellite speakers to the "T o Speakers" terminals on the back of the subwoofer .
where the subwoofer sounds in balance with the satellite speakers. If the system is not working properly , unplug the subwoofer and check all of your connections.
9. USING MUL TIPLE SUBWOOFERS Using two (or more) subwoofers in your system gives you the ultimate in bass performance. Y ou'll hear improved impact and definition, as well as greater output and dynamic range. If multiple subwoofers are used, place them in the same location.
5. If the red LED is lit, try this test: T urn the "BASS LEVEL" control to "MIN". Plug a standard RCA cable into the "FROM PREAMP" jacks. Lightly touch the plug at the free end of the cable, while slowly turning the "BASS LEVEL" control clockwise.
IF YOU NEED T O REPLACE THE EXTERNAL FUSE: Disconnect supply cord before changing fuse. Replace fuse only with same type. Remove the fuse cap and inspect the fuse. Look carefully at the fuse. If the wire filament inside the glass is bro- ken, replace the fuse ONL Y with one of the identical size and value.
B. Locate the subwoofer . 1. The best place for the subwoofer is the corner with the best structural strength. If the corners are roughly equal in construction, use the corner nearest the listening position. If the listening position is in the front half of the room, place the subwoofer in a front corner .
G. If you have a Pro-Logic only processor/receiver , follow these instructions. SPECIAL NOTE: Always check the processor/receiver/receiver ’ s owner ’ s manual.
14. SPECIFICA TIONS VX-860 ENCLOSURE TYPE: Sealed Box WOOFER: Single 12" Driver POWER RA TING: 250 watts RMS FREQUENCY RESPONSE: 20Hz - 200Hz ± 3dB DIMENSIONS (HxWxD): 0 ” x 0 ” x 0 ” WEIGHT : lbs.
An important point after buying a device MK Sound VX-850 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MK Sound VX-850 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MK Sound VX-850 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MK Sound VX-850 you will learn all the available features of the product, as well as information on its operation. The information that you get MK Sound VX-850 will certainly help you make a decision on the purchase.
If you already are a holder of MK Sound VX-850, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MK Sound VX-850.
However, one of the most important roles played by the user manual is to help in solving problems with MK Sound VX-850. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MK Sound VX-850 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
