Instruction/ maintenance manual of the product LCR-851 MK Sound
Go to page of 13
operation manual LCR-851/CENTER-851 LCR-850/CENTER-850 LCR-651 LCR-650 Miller & Kreisel Sound, Inc. 9351 Deering A venue Chatsworth, CA 91311-5858 USA (818) 701-7010 fax (818) 701-0369 www .
T HIS MANUAL APPLIES TO: LCR 650 shown in Light Cherry LCR 651 Shown in Titanium LCR 850 in Lt. Cherry LCR 851 in Titanium Center 850 in Lt. Cherry Center 851 in Titanium.
T ABLE OF CONTENTS 1. INTRODUCTION...........................................................................................................3 2. PLA CEMENT OF Y OUR M&K SPEAKERS...........................................................3 3. SPEAKER HOOK-UP & USA GE.
1. INTRODUCTION Congratulations! Y our new M&K speak er system will give y ou years of unmatched enjo yment and excitement while listening to your f avorite musical and audio/video sources .
WIRING The P ositive ( + ) lead from your amplifier or receiv er should be connected to the RED ( + ) "INPUT" terminal, and the Negative ( — ) lead from your amplifier or receiv er should be connected to the BLA CK ( — ) "INPUT" terminal.
If the center speaker is located horizontally abo ve the TV , the tweeter should be angled up and if the speak er is located below the TV than the tweeter should point down.
T ry to follo w the formula as close as you can. Y ou can fine tune the placement by listening to a source with an image (such as a vocalist) centered betw een the speakers .
CENTER CHANNEL The Center channel speaker in an y multichannel system is the most impor tant speaker in the system. This speaker often produces more output than the left and right speakers combined.
If you mount the surrounds on the side w all behind the listening position, they can be aimed to wards each other or angled tow ards the back wall or the side w all surface directly behind them. By reflecting sound behind the listening position, you ma y increase the sense of envelopment in the sound.
If your Subw oofer has a PHASE s witch on its back panel, mov e it either from (+) to ( — ) or vice v ersa. If your Subw oofer does not ha ve a PHASE s witch, it takes a bit more work. Y ou will hav e to change the P ositive and Negativ e speaker inputs on the back of BO TH Main speakers.
This clipping distor tion occurs when the demands of the music are greater than the amplifier's av ailable power . It can occur at 20 watts with a small amplifier , or at 400 watts with a large amplifier .
14. SPECIFICA TIONS These specifications apply to both the LCR-851 & Center -851, except as indicated: IMPED ANCE 4 ohms MINIMUM PO WER: 10 watts RMS RECOMMENDED PO WER: amplifiers with between 25.
LCR & CENTER 851/850/651/650 manual PN # 70042 08/20/2002 re v1 pt/qr k.
An important point after buying a device MK Sound LCR-851 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MK Sound LCR-851 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MK Sound LCR-851 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MK Sound LCR-851 you will learn all the available features of the product, as well as information on its operation. The information that you get MK Sound LCR-851 will certainly help you make a decision on the purchase.
If you already are a holder of MK Sound LCR-851, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MK Sound LCR-851.
However, one of the most important roles played by the user manual is to help in solving problems with MK Sound LCR-851. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MK Sound LCR-851 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
