Instruction/ maintenance manual of the product WL6700LU Mitsubishi
Go to page of 49
WL6700 LCD PROJECTOR MODEL WL6700U WL6700LU User Manual This User Manual is important to you. Please read it befor e using your projector ..
EN-2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE P ARTS INSIDE REFER SERVICING TO QUALIFIED SER VICE PERSONNEL.
EN-3 Contents Important safeguards ........................................................................................................................ 4 Preparing your pr ojector ...................................................................
EN-4 Important safeguar ds Please read all these instructions r egarding your projector and r etain them for future refer ence. Follow all warnings and instructions marked on the projector . 1. Read instructions All the safety and operating instructions should be read befor e the appliance is operated.
EN-5 WARNING: Unplug immediately if there is something wrong with your pr ojector . Do not operate if smoke, strange noise or odor comes out of your projector . It might cause fi r e or electric shock. In this case, unplug immediately and contact your dealer .
EN-6 Pr eparing your projector 1 2 3 Checking accessories The following accessories are pr ovided with this projector . Check to be sure that all of the accessories are packed in the package. Important: • The attached power cords ar e to be used exclusively for this product.
EN-7 Overview 1 2 8 4 5 9 10 6 7 3 8 7 10 9 11 1 3 4 6 5 2 1 Remote control sensor (Fr ont) 2 Lens 3 Control ar ea 4 Easy-carry handle 5 Air inlet grille 6 T erminal board 7 Air outlet grille Control .
EN-8 1 2 3 Preparating your projector (continued) Bottom side 1 Adjustment feet 2 Air inlet grille/Filter cover 3 Lamp cover Caution: Do not replace the lamp immediately after using the projector because the lamp would be extr emely hot and it may cause burns.
EN-9 Using the r emote control 30° 30° 30° 30° 20° 10° 20° 10° 20° 20° Operational range of the remote contr ol • Keep the remote contr ol photo-sensor out of direct sunlight or fl uor escent lamp light. • Keep the remote control photo-sensor at least 2 m (6 feet) away from fl uorescent lamps.
EN-10 Setting up your pr ojector Setting up the screen Install the screen perpendicularly to the pr ojector . If the screen can not be installed in such a way , adjust the projection angle of the pr ojector .
EN-11 Setting up your projector (continued) LENS SHIFT button T o adjust the positions of the projector and the scr een, use LENS SHIFT button. 1. Press the LENS SHIFT button. • The LENS SHIFT menu appears at the center of the screen. 2. Press the S , T , W or X button to move the image position.
EN-12 Setting up your projector (continued) Front pr ojection, ceiling mounting For ceiling mounting, you need the ceiling mount kit designed for this projector .
EN-13 Viewing computer images 2 1 AUDIO OUT AUDIO IN 1/2 2 1 2 1 A. Connecting the projector to a computer Preparation: • Make sure that the power of the pr ojector and that of the computer are turned off. • When connecting the projector to a desktop computer , disconnect the RGB cable that is connected to the monitor .
EN-14 Viewing computer images (continued) 2 1 1. Plug the attached power cord into the power cord inlet of this projector . 2. Plug the other end of the power cord into a power outlet. • The power cords for use in the U.S. and Eur ope are included with this projector .
EN-15 Viewing computer images (continued) C. Projecting images Preparation: • Remove the lens cap. 1. Put the projector into standby mode by pressing the main power switch.
EN-16 Viewing computer images (continued) Important: • Focus, zoom and lens shift adjustment is possible in the normal picture mode only . T o stop projecting: 13. Press the POWER button. • A confi rmation message is displayed. • T o cancel the procedur e, leave the projector for a while or press any button except the POWER button.
EN-17 Setting the aspect ratio Y ou can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the setting according to the type of the scr een to be used or your preference. How to change the settings: With the remote contr ol: 1.
EN-18 Viewing video images Connecting to a video player , etc. 1. Connect one end (yellow) of the supplied audio/video cable to the VIDEO IN terminal of the projector . 2. Connect one end (white and red) of the supplied audio/ video cable to the audio input terminals (L/MONO, R) of the projector .
EN-19 Connecting to video equipment having a HDMI terminal or DVI-D terminal Y ou can project high-quality images by connecting the COMPUTER/COMPONENT VIDEO DVI-D (HDCP) terminal of this projector to video equipment having a HDMI output terminal or DVI-D terminal.
EN-20 Equipment having a DVI-D terminal T o audio output terminals Audio cable (option) T o audio input terminals T o DVI-D terminal DVI cable (option) COMPUTER/COMPONENT VIDEO DVI-D (HDCP) Connection (for video equipment having a DVI-D terminal) • For connection to the DVI-D terminal, use a commercially available DVI cable.
EN-21 Viewing video images (continued) C. Projecting images Preparation: • Remove the lens cap. 1. Put the projector into standby mode by pressing the main power switch.
EN-22 9. Press the ZOOM/FOCUS button to display “FOCUS” and then press the button again to display “ZOOM.” 10. Adjust with the W or X button to get an approximate size. • When the ENTER button is pressed while “ZOOM” is displayed, the adjustment mode is switched between FAST and STEP.
EN-23 Menu operation • Menus are not displayed when no signal is supplied to the pr ojector . * 1: Not available when COLOR ENHANCER is set to sRGB. * 2: Not available with certain signals. * 3: Not available when the input signal is from the VIDEO IN or S-VIDEO IN terminal.
EN-24 Available settings in the menus Set the following items on their relevant menus. 1. IMAGE menu IMAGE - ADV ANCED menu ITEM SETTING FUNCTION COLOR ENHANCER AUTO Select to optimize the settings automatically depending on the input signal. (Select this option for normal use.
EN-25 2. INSTALLATION menu Menu operation (continued) ITEM SETTING FUNCTION LAMP MODE STANDARD Select this option when you want to view images in a well-lit room. LOW Select to moderate the intensity of the lamp. The operating sound is reduced and the lamp lifetime becomes longer.
EN-26 3. FEA TURE menu FEA TURE AUTO (FULL) AUTO opt. MENU POSITION VIDEO SIGNAL ? ASPECT RESET ALL English LANGUAGE A Ë OK SCART INPUT DISPLA Y INPUT P ASSWORD FUNCTION CINEMA MODE AUTO 1.
EN-27 4. SIGNAL menu SIGNAL - RESOLUTION (MEMORIZE) menu SIGNAL - USER menu ITEM SETTING FUNCTION MEMOR Y CALL AUTO / MEMOR Y 1 / Use to select the setting of RESOLUTION (MEMORIZE) alr eady saved. Impossible to select if no setting has been saved. AUTO is selected by default.
EN-28 5. INFORMA TION menu ITEM DESCRIPTION LAMP TIME (LOW) This item shows a lamp operating time (hour) calculated based on that LAMP MODE is LOW . • When the LAMP MODE is ST ANDARD, this item shows a longer lamp operating time than the actual time.
EN-29 Adjusting pr ojected images T o adjust the brightness (CONTRAST and BRIGHTNESS): Y ou can make adjustments for the brightness of the projected image using the menu. (See page 24 for menu setting.) 1. Display the IMAGE menu. 2. Select CONTRAST or BRIGHTNESS by pressing the S or T button.
EN-30 T o adjust the tone of white (COLOR TEMP .): Y ou can select a preset color temperatur e (white tone) using the menu. (See page 24 for menu setting.) 1. Display the IMAGE menu. 2. Select COLOR TEMP . by pressing the S or T button. 3. Select your desired color temperature by pr essing the W or X button.
EN-31 Adjusting projected images (continued) How to adjust the computer image This projector automatically selects a pr oper signal format according to the type of video signal supplied from the computer . However , video signals from the computer may not be pr ojected correctly depending on the types of the computer and images to be projected.
EN-32 How to adjust the image supplied from the computer using the menu: Carry out the following procedur es according to the symptoms. Wide strips appear . ……………………………………… Adjust TRACKING in the SIGNAL menu. The projected image fl ickers.
EN-33 Set the background color (Set the background color only when you set the im- age size to x1 or x2.) 6. Select BACK COLOR by pressing the S or T but- ton. 7. Select your desired color for the backgr ound (GRA Y , RED, GREEN, BLUE, BLACK, WHITE, RED50%, GREEN50%, or BLUE50%) by pressing the W or X button.
EN-34 MENU ACCESS FEA TURE opt. LOCK UNLOCK OK OK P ASSWORD CONFIRM 1 3 2 4 O K : ENTER CANCEL : MENU MENU ACCESS FEA TURE opt. LOCK UNLOCK OK OK P ASSWORD 1 3 2 4 O K : ENTER CANCEL : MENU Password f.
EN-35 Split Y ou can split the screen in two and display a computer image on the left screen and a video image on the right screen. Left screen Right screen T o use the split mode: 1.
EN-36 Mouse remote contr ol By connecting to personal computer through the USB port, you can operate your computer with the pr ojector remote control. Projector + computer with USB connector Operation • Y ou can use the mouse remote contr ol function with a computer supporting USB only .
EN-37 Supervising and controlling by computer Y ou can supervise and control the pr ojector’ s operation using a personal computer via a LAN network. • T o supervise and contr ol the projector , install the software “Projector -Control Device Installer *” contained in the attached CD-ROM.
EN-38 Indicators POWER Steady green or Steady red Steady red Steady green Steady red Steady red Blinking green/red Blinking green/red ST A TUS Blinking orange Blinking green Blinking green/red Blinking red Steady red Off Steady or Blinking CONDITION Abnormal temperature • The ventilation grilles are clogged with dust or dirt.
EN-39 This projector includes a terminal cover with Anti-Theft Alarm device. Once the terminal cover is installed, its Anti-Theft Alarm device will detect vibration caused by the projector being moved and emit an alarm. • Mitsubishi assumes no responsibility or liability for theft or other damages.
EN-40 Replacing the lamp This projector is equipped with a lamp to pr oject images. This lamp is a consumable. It may bur n out or its brightness may decrease during use. In such cases, r eplace the lamp with a new one as soon as possible. Be sure to replace the lamp with a new lamp separately sold that is exclusive to this projector .
EN-41 (a) (b) (c) (c) Replacing the lamp (continued) T o replace the lamp: 1. T ur n off the main power switch and unplug the power cor d. 2. Reverse the projector gently . 3. Loosen the screw (a) using a Phillips screwdriver (+), and remove the lamp cover (b).
EN-42 Maintenance W ar ning: • Never use fl ammable air duster or other materials when cleaning the air -fi lter . Flammable substances may ignite causing fi r e or backdown when the lamp is illuminated. • Do not use fl ammable solvents (benzene, thinner , etc.
EN-43 T roubleshooting Before asking for r epair of the projector , check the following. If the symptom persists, stop using the projector , be sure to unplug the power plug, and then contact your dealer . No image appears on the screen. Problem Solution Power can not be turned on.
EN-44 T roubleshooting (continued) No image appears on the screen. (continued) Problem Solution “NO SIGNAL” is displayed. • T ur n on the power of the connected device, or check whether there is something wrong with the connected device. • Check whether the external device output signals.
EN-45 T roubleshooting (continued) Images are not displayed corr ectly . (continued) Problem Solution Projected images ar e obscured. • Match the output resolution of your computer with the resolution of the pr ojector . For the method to change the output resolution of the computer , contact the manufacturer of your computer .
EN-46 Specifi cations The specifi cations and outside appearance of the pr ojector are subject to change without prior notice. T ype LCD projector Model WL6700U/WL6700LU Display technology 1.2-inch LCD panel: 3 pieces (for R,G,B) Pixel: 1366 x 800 = 1092800 pixels T otal 3278400 pixels Active pixel rate: 99.
EN-47 Specifi cations (continued) Specifi cation of RGB signals in each computer mode of the projector Signal mode Resolution (H x V) Horizontal frequency (kHz) V ertical frequency (Hz) Normal mode (H x V) Real mode (H x V) TV60, 480i (525i) 720 x 480 15.
EN-48 1 R(RED)/P R /C R 2 G(GREEN)/Y 3 B(BLUE)/P B /C B 4 GND 5 GND 6 GND 7 GND 8 GND 9 DDC 5V 10 GND 11 GND 12 DDC Data 13 HD/CS 14 VD 15 DDC Clock 1 - - 2 TXD IN 3 RXD OUT 4 - - 5 GND - 6 - - 7 - - 8 - - 9 - - 1 5 11 6 10 15 SERIAL (D-SUB 9-pin) Pin No.
MITSUBISHI Projector Contact Information 1 Zusho Baba, Nagaokakyo-City , Kyoto Japan M I T SUBIS HI ELECTRIC CORPORA T I O N North America MESCA (Mitsubishi Electric Sales Canada Inc.
An important point after buying a device Mitsubishi WL6700LU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mitsubishi WL6700LU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mitsubishi WL6700LU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mitsubishi WL6700LU you will learn all the available features of the product, as well as information on its operation. The information that you get Mitsubishi WL6700LU will certainly help you make a decision on the purchase.
If you already are a holder of Mitsubishi WL6700LU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mitsubishi WL6700LU.
However, one of the most important roles played by the user manual is to help in solving problems with Mitsubishi WL6700LU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mitsubishi WL6700LU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
