Instruction/ maintenance manual of the product S490 Mitsubishi
Go to page of 36
EN – 1 ENGLISH LCD Projector User Manual FRANÇAIS DEUTSCH ITALIANO ESPAÑOL MODEL X500U / X490U / S490U X500 X490 S490.
EN – 2 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “ dangerous voltage ” within the product ’ s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
EN – 3 ENGLISH Contents Important safeguards ........................................................................... 4 Overview ............................................................................................... 6 Using the remote control .
EN – 4 Important safeguards Please read all these instructions regarding your LCD projector and retain them for future reference. Follow all warnings and instructions marked on the LCD pro- jector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated.
EN – 5 ENGLISH WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer.
EN – 6 Overview LAMP VOLUME ZOOM/ FOCUS KEYSTONE TEMP VIDEO COMPUTER MUTE AUTO POSITION MENU ENTER 12 10 11 9 8 7 6 1 2 3 4 5 15 14 13 5 97 6 8 1 2 34 10 11 12 REMOTE AUDIO 2 IN COMPUTER 2 IN AUDIO .
EN – 7 ENGLISH Bottom side 1 2 3 1 Adjustment foot (Left/Right) 2 Air inlet cover 3 Lamp cover Caution: Do not replace the lamp right after using the projector .
EN – 8 Battery installation Use two AA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -).
´ EN – 9 ENGLISH Installation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector . Front projection T o find the approximate distance between the projector and screen: Multiply the width of the screen x 1.
EN – 10 Basic connections This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal com- puters having analog RGB output. Important: • Make sure that your equipment is turned off before connection. • Plug in firmly and unplug by holding the plug, not by pulling the main power cable.
´ EN – 11 ENGLISH For computer with Mini D-SUB 15P terminal (IBM PC or IBM PC compatibles etc.) REMOTE AUDIO 2 IN COMPUTER 2 IN AUDIO OUT COMPUTER OUT AUDIO 1 IN COMPUTER 1 IN DIGITAL ANALOG INPUT .
EN – 12 Adjustment foot screen Preparing the projector for operation Getting ready for projection 1. Connect the power cord provided to the projector . 2. Connect the power cord to the wall power outlet. 3. Remove the lens cap. W arning: • Do not look directly into the lens when projector is “ ON ” .
´ EN – 13 ENGLISH T o operate projector power ON • The picture might not be of optimum performance in extreme hot or cold conditions. (The projector is not malfunctioning.) 4. Press the ZOOM/FOCUS button to FOCUS. “ FO- CUS ” will appear on the display .
EN – 14 A UDIO 15 T o operate projector power ON (Continue) Turning off the projector 9. Press the POWER button. The message “ POWER OFF? YES : PRESS AGAIN ” appears on the screen. • T o exit from this mode, press any button except the POWER button.
EN – 15 ENGLISH Basic operation Several settings can be adjusted using Menu. EXAMPLE: Auto power off time setting 1. Press the MENU button. 2. Press the $ or % button to select the INST ALLA- TION menu. 3. Press the ENTER button (or } button). 4. Press the { or } button to select AUTO POWER OFF .
EN – 16 IMAGE REVERSE OFF AUTO POWER ON OFF AUTO POWER OFF IRIS OFF ON INSTALLATION ON STANDARD BACK COLOR OFF BLUE XGA60 LAMP MODE SPLASH SCREEN opt. XGA60 MENU POSITION VIDEO SIGNAL AUTO LANGUAGE English RESET ALL OK ANAMORPHIC OFF A Ë ? EXPAND MODE 1.
EN – 17 ENGLISH ANAMORPHIC .... Select ON when playing DVD discs containing data of letterboxed images. LANGUAGE ........ Use to select the language used in the menus. ( / English / Espa ñ ol / Deutsch / Fran ç ais / Italiano / ) RESET ALL .......
EN – 18 Adjusting the image Y ou can adjust the picture by using the IMAGE menu. T o control the level of white-to-black in the image : Adjust CONTRAST in IMAGE menu. Press the % button to increase the contrast and the $ button to reduce it. T o control the light level of the image : Adjust BRIGHTNESS in IMAGE menu.
EN – 19 ENGLISH Adjustment from personal computer Although this projector sets proper signal systems automatically for the image signal from personal computers, it cannot be applied to some of personal computers. In this case, press the AUTO POSITION button.
EN – 20 Advanced features for presentation Expand By pressing the EXP AND button on the remote con- trol, you can magnify the detailed image of the picture. Y ou can also view the screen displaying the picture as its original size (native resolution display).
EN – 21 ENGLISH Mouse remote control By connecting to personal computer through the USB or PS/2 port, you can operate your computer with the projector remote control. Projector + computer with USB connector Operation • T urn off computer and the projector before connecting with PS/2 port.
EN – 22 What you can do with HUB This projector is equipped with a relaying HUB. Y ou can do: – Easy Data (File) Exchange – Projection of the data in the compters connected via the HUB – Connection with an existing LAN – Print out through a Network printer Example of Network System 1) Connect laptop computers directly to the internal HUB.
EN – 23 ENGLISH The lamp is designed to project the image on the LCD panels. When the lamp no longer functions, replace it with a new one. Caution: • Do not remove the lamp immediately after using the projector , you may get burned because of the high temperature of the lamp.
EN – 24 Maintenance Caution: Be sure to turn off the projector and unplug the power cord from the wall outlet before you perform any main- tenance on the projector .
EN – 25 ENGLISH T roubleshooting The following offers solutions to some of the common problems you may encounter . W e suggest that you consult this chart before contacting your dealer . CAUSE • The air inlet slots, outlet slots or air filter is clogged with dust or some objects.
EN – 26 Indicators The projector has three indicators each of which shows the working condition of the projector . The following offers solutions to possible problems.
EN – 27 ENGLISH Specifications LCD projector X500U | X490U | S490U AC100 - 240V , 50 / 60Hz 4.3 A X500U|X490U S490U 1.3-inch LCD panel: 3 pieces (for R, G, B) 1.3-inch LCD panel: 3 pieces (for R, G, B) Pixels 1,024 × 768 = 786,432 pixels Pixels 800 × 600 = 480,000 pixels T otal 2,359,296 pixels T otal 1,440,000 pixels Active pixel rate: 99.
EN – 28 Specifications (continued) 2 LAN cable 246C417-10 1 Remote control 939P878-10 1 Remote control cable 246C424-10 1 User manual 871D340-30 1 Quick reference card 857D033-10 1 Reference manual for HUB 871D350-10 2 Battery for remote – Connectors Dimensional drawings (mm) 305 258 23 57 337 101.
EN – 29 ENGLISH Specification of RGB signals in each computer mode of the projector ( For X500U / X490U ) • When the EXP AND MODE of FEA TURE menu is set to real screen display , by pressing the EXP AND button on the remote control, it will switch to the screen displaying the picture as its original size (real screen display).
EN – 30 Specification of RGB signals in each computer mode of the projector ( For S490U ) • When the EXP AND MODE of FEA TURE menu is set to real screen display , by pressing the EXP AND button on the remote control, it will switch to the screen displaying the picture as its original size (real screen display).
Printed in Japan 871D340B30 Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-City , Kyoto Japan.
1 Control projector by using a personal computer 1) Interface This projector can be controlled by connecting a personal computer with RS-232C terminal.
2 3) Control sequence (1) Send the command from a personal computer to the projector . (The commands must be sent at least 400ms apart.) (2) The projector will send a return command 400ms* after it has received an end code. If the command is not received correctly , the projector will not send the return command.
3 Sending commands Status code from Meaning from the PC etc. projector 30 30 72 35 34 0D Command as same as MENU button '0' '0' 'r' '5' '4' ' &ap.
4 9) Menu setting commands The menu setting commands execute the menu setting of this projector. If the personal computer doesn ’ t send the commands without attaching the data code, the projector which has received the command replays the setting data as data code.
5 How to set the grade Use ASCII letters code to set the grade for setting data. Please refer to the table below for HEX code. ASCII '+' ' Å |' '0' '1' '2.
An important point after buying a device Mitsubishi S490 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mitsubishi S490 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mitsubishi S490 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mitsubishi S490 you will learn all the available features of the product, as well as information on its operation. The information that you get Mitsubishi S490 will certainly help you make a decision on the purchase.
If you already are a holder of Mitsubishi S490, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mitsubishi S490.
However, one of the most important roles played by the user manual is to help in solving problems with Mitsubishi S490. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mitsubishi S490 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
