Instruction/ maintenance manual of the product XD8100U Mitsubishi Electronics
Go to page of 17
1 DLP™ Pr ojector XD8100U Contr olling the pr ojector using a personal computer This projector can be contr olled by connecting a personal computer with RS-232C terminal. In addition, by connecting multiple projectors to each other in a daisy chain configuration, you can contr ol each projector fr om one personal computer .
2 • Example of ID setting (When Group A, which performs multi-pr ojection with two pr ojectors, and Group B, which performs multi-projection with thr ee pr ojectors, are connected.
3 2 . Cont rol com man d config ur ati on The command consists of the address code, ID code, function code, data code, ACK/NAK, and end code. The length of the command varies among the functions.
4 • The projector may not r eceive a command when the splash scr een is being displayed immediately after turning on the power . Use command “00r10” to cancel the splash scr een. • While using the LAN terminals, the LAN functions take precedence.
5 Projector error Send out “00vER” to check error details. Recover from error state. 0– 3 To normal operation 4 Enter password. Send out “00PASS****.
6 4. Comm an d lis t 4. 1 Op er at ion c omm an ds The operation commands are used for the basic operation setting of this projector . They may not be executed while the signals are changed.
7 Use the following commands to obtain the values of the items in the INFORMA TION menu. ITEM Function Data (Receive) Character ASCII code LAMP 1 TIME (LOW) vLE1L 76h 4Ch 45h 31h 4Ch hhhhmm LAMP 2 TIM.
8 • When ID is specied (when the command is sent to the projector with the ID of “01” or “ALL”): Command sent from the PC, etc. Status code returned from the pr ojector Description ‘30.
9 4.4 Di rec t co mma nd s (Not executable in stand-by mode. Possible only to read during BLANK.) The direct commands ar e used to numerically adjust the geometrical corr ection and bright uniformity correction.
10 4.6 Me nu se t ti ng co mma nd s (Not executable in stand-by mode. Possible only to read during BLANK.) The menu setting commands are used for the menu setting of this projector .
11 ITEM Function Data Character ASCII code COOLING CONDITION AG 41h 47h 0 (0°), 1 (45°), 2 (90°), 3 (135°), 4 (180°), 5 (225°), 6 (270°), 7 (315°) TEST P A TTERN TP 54h 50h 0 (OFF), 1 (CROSS HA TCH), 2 (WHITE), 3 (BLACK), 4 (H. COLOR BARS), 5 (V .
12 ITEM Function Data Character ASCII code EDGE BLENDING (RESET) EBRST 45h 42h 52h 53h 54h COLOR MA TCHING CMC 43h 4Dh 43h 0 (OFF), 1 (MANUAL), 2 (MEASURE) COLOR MA TCHING- MANUAL (GAIN) MNTG 4Dh 4Eh .
13 ITEM Function Data Character ASCII code P ASSWORD FUNCTION PSLOCK 50h 53h 4Ch 4Fh 43h 4Bh 0**** (UNLOCK), 1**** (DISPLA Y INPUT), 2**** (MENU ACCESS), 3**** (SPLASH ID SCREEN) **** is a 4 to 8-digit password comprised of any figur es 1 to 4.
14 How to set the value Use the character or ASCII code as shown below to set the value. Character + - 0 1 2 3 4 5 6 7 8 9 ASCII code ‘2Bh’ ‘2Dh’ ‘30h’ ‘31h’ ‘32h’ ‘33h’ ‘34h’ ‘35h’ ‘36h’ ‘37h’ ‘38h’ ‘39h’ [Example 1] When setting the AUTO POWER ON to ON.
15 [Example 3] When checking the TINT setting (when the TINT is set to +10). (V alues enclosed in quotation marks are ASCII codes.): • When ID is not specied: Command sent from the PC, etc. Status code returned from the pr ojector Description ‘30’ ‘30’ ‘53’ ‘0D’ 00S Command for checking the TINT setting (ID command is omitted.
16 4.7 Passwor d loc k com man ds The password lock commands control the password lock. The password lock enabling or disabling command is sent with a 4 to 8-digit password comprised of any gures 1 to 4 added to the end of the data code.
17 5. Exec ut io n pr oce du re of RS -2 32C c omm an ds v ia L A N When the RS-232C command is executed via LAN, a 32-byte connection certication data must be added before the RS-232C command. T o cr eate a 32-byte certication data, following information and procedur e ar e requir ed.
An important point after buying a device Mitsubishi Electronics XD8100U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mitsubishi Electronics XD8100U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mitsubishi Electronics XD8100U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mitsubishi Electronics XD8100U you will learn all the available features of the product, as well as information on its operation. The information that you get Mitsubishi Electronics XD8100U will certainly help you make a decision on the purchase.
If you already are a holder of Mitsubishi Electronics XD8100U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mitsubishi Electronics XD8100U.
However, one of the most important roles played by the user manual is to help in solving problems with Mitsubishi Electronics XD8100U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mitsubishi Electronics XD8100U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
