Instruction/ maintenance manual of the product XD250U-G Mitsubishi Electronics
Go to page of 42
D A T A PR OJECT OR MODEL XD250U/XD250U-G XD280U/XD280U-G User Manual XD250U XD250U-G XD280U XD280U-G This User Manual is impor tant to you. Please read it bef o re using your projector .
EN-2 The lightning flash with arro whead symbol within an equilateral tri angle is intended to alert the user to the p resence of unins u- lated "dangerou s voltage" within the produ ct’ s enclosure t hat may be of sufficient magnitude to c onstitute a risk of electric shock.
EN-3 ENGLISH Contents Impor tant saf eguards .......................................................................... ...................................................... 4 Overview .................................................................
EN-4 Impor tant saf eguar ds Please read all these instructions regarding yo ur projector and retain them f or future reference . Follo w all warnings and instructions mar k ed on the projecto r . 1. Read instructions All the saf ety and operating instructions shou ld be read bef ore the appliance is operated.
EN-5 ENGLISH W ARNING: Unplug immediately if there is som ething wrong with yo ur pro jector . Do not operate if smok e, strang e noise or odor comes out of your pro- jector . It may cause fire or electric shock. In th is case, unplug immedi- ately and contact you r dealer .
EN-6 Overview 1F O C U S r i n g 2Z O O M r i n g 3 Control panel 4 Air inlet grille 5 Remote control sens or (Front) 6 Air outlet grille 7 T ermi nal boar d 8 Speaker 9 Adjustment feet 10 Lock bar 11.
EN-7 ENGLISH Overview (continued) Bottom side 1 Adjustment feet Remote control 1O N b u t t o n 2 MA GNIFY button 3 V OLUME UP , DOWN b uttons 4 KEYST ONE button 5 MENU button T wo types of MENU d isplay ar e equipped. QUICK MENU appears on the screen when pressing MENU butto n.
EN-8 Remote contr ol Battery installatio n Use two (A A, R6) size b atteries. 1. Remov e the back cov er of the remote contr ol by pushing the battery compartment door in the direction of the arrow . 2. Load the batteries making sure that the y are positioned correctly (+ to +, and - to -) .
EN-9 ENGLISH Installation Lay out of the projecto r Image size v aries depending on the distance between the scr een and the projector . Front projection • The abov e figures are appro ximate and ma y be slightly diff erent from the actual measurements .
EN-10 Basic connections This projector can be connected with v arious devices such as a VCR, video camera, videodisc pla yer , and personal computer that ha ve anal og RGB output connectors . Importan t: • Make sure that the connected device is turned off bef ore star ting conne ction.
EN-11 ENGLISH Basic connections (continued) Connection (f or video equipment having an HDMI terminal) Importan t: • Use a commercially av ailable HDMI (with HDMI logo) cable. • Y ou don’t have to connect any cab le for audi o input. Y ou can input video and audio using an HDMI cable only .
EN-12 Basic connections (continued) Projector + Computer For computer with Mini D-SUB For analog connection: 1. Connect one end of the supplied RGB cab le to the COMPUTER IN terminal (1, 2) of the projector . 2. Connect the other end of the RGB cab le to the monitor por t of the computer .
EN-13 ENGLISH Preparat ion Preparation f or projection 1. Attach the prov ided power cord to the projector . 2. Plug the po wer cord in the wall outlet. 3. Remov e the lens cap. Wa rn i n g : • Do not look into the lens directly when the proj ector is on.
EN-14 Basic operation Po w e r- o n 1. T urn on the device connected to the project or first. 2. Plug the power cord in the wall outlet. • The POWER indicator lig hts up.
EN-15 ENGLISH Basic operation (continued) Po w e r- o f f Use the fo llowing procedure to turn off the projector . The lamp may dete riorate if the projector is pow ered off and on repeatedly within 30 minu tes after the lamp is lighted. 1. Press the PO WER button o n the control panel or the ST ANDBY button on th e remote control.
EN-16 Basic operation (continued) W all Screen This function is to repr oduce natural color tones when images are pro- jected directly onto a screen or wal l surface . Y ou can select from BEIGE, LIGHT BLUE, LIGHT GREEN, PI NK, BLACK BO ARD , WHITE BOARD , and OFF , to match the color of the screen or w all to be used for projection.
EN-17 ENGLISH Menu operation As one of the two types of MENU display , fol lowing QUICK MENU appears on the screen when pressing MENU b utton on the remote con tro l. In addition, DET AIL MENU (See page 19) a ppears when selecting DET AIL MENU in this MENU and pressing ENTER b utton.
EN-18 Menu operation (contin ued) Menu O ptions Set the f ollowing options pro vided in the respectiv e menus. 1. QUICK MENU • Y ou cannot adjust COLOR TEMP . when W ALL SCREEN is set to other than OFF . • When COLOR ENHANCER is switche d, projected images may be distorted.
EN-19 ENGLISH Menu operation (contin ued) DET AIL MENU * Menus are not displa yed when no signal is supplied to the project or . IMAGE IN S T ALLA TION FEA TURE S IGNAL INFORMA TION COLOR ENHANCER CONTRA S T BRIGHTNE SS COLOR TEMP .
EN-20 Menu operation (contin ued) Basic oper ation Sev eral settings can be adjusted using the menu. Example : A uto pow er off time setting 1. Press the MENU b utton. 2. Select the DET AIL MENU and press the ENTER butto n (or T button). 3. Press the W or X bu tton to select INST ALLA TION.
EN-21 ENGLISH Menu operation (contin ued) 2. INST ALLA TION menu • By defa ult, the LAMP MODE is set to ST ANDARD . The LAMP MODE is set to eit her ST ANDARD or LO W depending on the setting last sel ected, and you ca nnot switch the LAMP MODE in about one minute after the lamp is on .
EN-22 Menu operation (contin ued) 3. FEA TURE menu • Y ou can select CINEMA MODE only when the input si gnal is a TV60, TV50, 480i, or 576i video signal. Menu option Setting Fe ature desc ription ASPECT NORMAL Automatically se ts the aspect ratio in re lative to the input signal.
EN-23 ENGLISH Menu operation (contin ued) 4. SINGAL menu • Horizontal strips ma y appear in the enlarged projec t ed image, though these condit ions are not a malfunction. • When you ch ange the value of the horizontal or vertical position drastically , noise may appear .
EN-24 Menu operation (contin ued) 6. INFORMA TION menu Menu option Feature description LAMP TIME (LOW) This menu sh ows a lamp oper ating time (hou r) calculated assumi ng that LAMP MODE i s LOW . • When the LAMP MO DE is ST ANDARD , t his menu shows a longer lamp operatin g time than the actual t ime.
EN-25 ENGLISH Image adjustment Adjusting pro jected images T o adjust the brightness (CONT RAST and BRIGHT- NESS): Y ou can make adjustments of the brightness of the projected image using the men u. (See page 18 o r 20 f or the menu opt ions.) 1. Displa y the QUICK MENU or the IMA GE menu.
EN-26 Image adjustment (continued) BrilliantColor TM Use this setting to make color s with medium brightness, such as yel- low and the skin tone a ppear natural. Press t he W button to d ecrease the val ue to lessen the effect. Press th e X button to increase the value to heighten the eff ect.
EN-27 ENGLISH Netw ork settings Y ou can set the network of the projector usi ng the menu. Setting Projector Name 1. Displa y the NETWORK menu. (See pag e 27 for menu setting. ) 2. Press the S or T butto n to select PROJECT OR NAME. 3. Press the W or X bu tton to select SET .
EN-28 Network settings (contin ued) Setting or Clearing DHCP 1. Display the IP CONFIG men u. 2. Press the S or T button to select DHCP . 3. Press the ENTER b utton. • Confirmation dialog appears. 4. Press the W or X bu tton to select ON or OFF . 5. Select the item to set, and press the ENTER button.
EN-29 ENGLISH Network settings (contin ued) How to Use Network Function • When connecting a computer and project or with LAN, config- ure the both IP Addresses in the same network g roup. If connecting in diff erent network group , be sure to use a router .
EN-30 Adv anced features Displaying a user-defined image during startup or mut- ing Y ou can display your desired image as the star tup screen (or splash screen). Using the menu, y ou can also use it as the backg round that is display ed while the video is muted or no signal is input.
EN-31 ENGLISH Adv anced features (continued) T o cancel the passwor d function: 1. Display th e FEA TURE menu. 2. Press the S or T butto n to select P ASSWORD FUNCTION. 3. Press the ENTER b utton. • The screen f or canceling the pass word function appears .
EN-32 Adv anced features (continued) Supervising and contr olling by computer Y ou can super vise and co ntrol the projector's oper ation using a personal computer vi a a LAN network. • T o supervise and control the projector , install the software "ProjectorVie w Global +*" contained in the attached CD-ROM.
EN-33 ENGLISH Lamp replacement This projector is equipped with a lamp to project images. This lamp is a consumable . It may b ur n out or it s brightness may decrease during use. In such cases, replace th e lamp with a ne w one as soon as possi- ble .
EN-34 Lamp replacement (continued) 5. Remov e the lamp attachment unit. • Pull the lamp unit out of the proj ector slowly . If it is pulled out quickly , the lamp may brea k, scattering glass fragments.
EN-35 ENGLISH T roub leshooting Bef ore asking f or repair of the project or , check the f ollowing. If the symptom persists , stop using the pro jector , be sure to u n plug the powe r plug, and then contact you r dealer . No image appe ar s on the sc reen.
EN-36 T roubleshooting (contin ued) Images are not displayed correctly . Problem Solution Projected imag es are shaking. Projected imag es are displaced. • Check tha t the cable con nected to the e xternal device isn’t inte r mitte nt. • Connect the cab le’s plug with the external de vice’ s connector firmly .
EN-37 ENGLISH T roubleshooting (contin ued) Other s If the following pr oblem occurs after the lamp is repl aced, chec k the following first. Maintenanc e Wa rn i n g : Do not use flammable solvents (benzene , thinner , etc.) and flammable aerosols when cleaning the pro jector body and lens.
EN-38 Indicators This projector has tw o indicators, each of whic h shows the operati on condition of the projecto r . The foll owing off er solutions to possible pro blems.
EN-39 ENGLISH Specifications • The specifications and outside appearance of the pr ojector are subject to change without prior notice. Ty p e D L P ™ D ATA p r o j e c t o r Model XD250U/X D250U-G/XD280U/X D280U-G Rated po wer supply 100 - 240 V AC , 50 / 60 Hz P ower consumption 3.
EN-40 Specifications (continued) Connector s Dimensional drawings ( unit : mm) What’ s included in the bo x Replacement par t 15 11 6 10 15 pin No . Spec. 1R ( R E D ) / C R 2G ( G R E E N ) / Y 3B ( B L U E ) / C B 4G N D 5G N D 6G N D 7G N D 8G N D 9 DDC5V 10 GND 11 GND 12 DDC Data 13 HD/CS 14 VD 15 DDC Clock pin No.
EN-41 ENGLISH Specifications (continued) Specification of RGB signals in each com puter mode of the projector *1 When you input the sig nals WXGA60, WXGA60a, WXGA60b , or WXGA60c, select the supported image size from WXGA of t he FEA TURE men u. *2 The partial enlargement feature is not suppor ted.
EN-42 Mit s ubi s hi Projector Warranty , S ale s S uppor t and S ervice Information North Amer ic a MDEA (Mit sub i s hi Digit a l Electronic s Americ a , Inc.) Pre s ent a tion Prod u ct s Divi s ion 93 51 Jeronimo Ro a d Irvine CA 9 261 8 , U S A For W a rr a nty Regi s tr a tion, vi s it: http://www .
An important point after buying a device Mitsubishi Electronics XD250U-G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mitsubishi Electronics XD250U-G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mitsubishi Electronics XD250U-G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mitsubishi Electronics XD250U-G you will learn all the available features of the product, as well as information on its operation. The information that you get Mitsubishi Electronics XD250U-G will certainly help you make a decision on the purchase.
If you already are a holder of Mitsubishi Electronics XD250U-G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mitsubishi Electronics XD250U-G.
However, one of the most important roles played by the user manual is to help in solving problems with Mitsubishi Electronics XD250U-G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mitsubishi Electronics XD250U-G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
