Instruction/ maintenance manual of the product MSY-D30/36NA Mitsubishi Electronics
Go to page of 8
JG79A061H01 SPLIT -TYPE AIR CONDITIONERS INSTALLATION MANUAL ENGLISH Required Tools for Installation Phillips screwdriver Level Scale Utility knife or scissors 3 in.
1-3. SPECIFICA TIONS 1-3-1. POWER SUPPL Y AND INDOOR/OUTDOOR WIRE CONNECTION • Power should be taken from an exclusive branched circuit. • Wiring work should be based on applicable technical standards. • Wiring connections should be made following the diagram.
Outdoor unit installation 2-13/16 in. (70 mm) or more/ 5-1/8 in. (130 mm) or more for left and left back piping (using spacer) 1-4. INST ALLA TION DIAGRAM ACCESSORIES Check the following parts before installation.
Installation plate (1) Center of ø 3 in. (75 mm) hole 8-11/16 in. (220 mm) or more 4-11/16 in. (120 mm) or more 2-13/16 in. (70 mm) or more 5-1/8 in. (130 mm) or more for left and left back piping (using spacer) Ceiling Wall Wall Attachment screw (2) * Same for left hole.
Liquid pipe Gas pipe Felt tape (7) Indoor/outdoor unit connecting wire (A) Piping tape (G) 2-5. PIPE FORMING AND DRAIN PIPING 2-5-1. PIPE FORMING • Place the drain hose below the refrigerant piping. • Make sure that the drain hose is not crowded or bent.
3-1. CONNECTING WIRES FOR OUTDOOR UNIT 1) Remove the service panel. 2) Remove the conduit cover. 3) Attach the conduit connector to conduit cover with lock nut then secure it against unit with screws. 4) Connect ground wires of indoor/outdoor unit connecting wire (A) and power supply cord (K) to the TB support.
3-2. FLARE CONNECTION 1) Cut the copper pipe as straight as possible with a pipe cutter. (Fig. 1, 2) 2) Remove all burrs from the cut section of the pipe, ensuring that precautions are taken to avoid getting metal shavings into the piping.
4-4. EXPLANA TION TO THE USER • Using the OPERATING INSTRUCTIONS, explain to the user how to use the DLUFRQGLWLRQHU WKHUHPRWHFRQWUROOHU UHPRYLQJWKHDLU ¿OWHUVSODFLQJRU UHPRY - ing the remote controller from the remote controller holder, cleaning methods, precautions for operation, etc.
An important point after buying a device Mitsubishi Electronics MSY-D30/36NA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mitsubishi Electronics MSY-D30/36NA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mitsubishi Electronics MSY-D30/36NA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mitsubishi Electronics MSY-D30/36NA you will learn all the available features of the product, as well as information on its operation. The information that you get Mitsubishi Electronics MSY-D30/36NA will certainly help you make a decision on the purchase.
If you already are a holder of Mitsubishi Electronics MSY-D30/36NA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mitsubishi Electronics MSY-D30/36NA.
However, one of the most important roles played by the user manual is to help in solving problems with Mitsubishi Electronics MSY-D30/36NA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mitsubishi Electronics MSY-D30/36NA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
