Instruction/ maintenance manual of the product HC910 Mitsubishi Electronics
Go to page of 38
HC910 DLP™ PROJECTOR MODEL HC910 User Manual ENGLISH This User Manual is important to you. Please r ead it befor e using your pr ojector ..
EN-2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE P ARTS INSIDE REFER SERVICING TO QUALIFIED SER VICE PERSONNEL.
EN-3 ENGLISH Contents Declaration of Conformity Model number : HC910 T rade name : MITSUBISHI ELECTRIC Responsible party : Mitsubishi Digital Electronics America, Inc. 9351 Jeronimo Road, Irvine, CA 92618 U.S.A T elephone number : +1-(949) 465-6000 This device complies with Part 15 of the FCC Rules.
EN-4 Important safeguar ds Please read all these instructions r egar ding your projector and r etain them for futur e refer ence. Follow all warnings and instructions marked on the projector . 1. Read instructions All the safety and operating instructions should be read befor e the appliance is operated.
EN-5 ENGLISH WARNING: Unplug immediately if there is something wrong with your pr ojector . Do not operate if smoke, strange noise or odor comes out of your projector . It might cause fi re or electric shock. In this case, unplug immediately and contact your dealer .
EN-6 Pr eparing your pr ojector Cables Power supply parts Remote control parts Power cord (two) (246C483-10, 246C383-20) Remote control (290P133-10) R03 (Size-AAA) battery (two) RS-232C cable (246C508.
EN-7 ENGLISH Overview 3 2 1 57 10 9 8 6 4 2 1 3 4 8 5 6 7 9 1 FOCUS ring 2 ZOOM ring 3 Control panel 4 Air outlet grille 5 Remote contr ol sensor (Front) 6 Air inlet grille 7 Air outlet grille 8 T erm.
EN-8 ON DVI PC COMP CONTRAST ASPECT CNT M1 AV MEMOR Y BRIGHTNESS BRT M2 COLOR TEMP C. T . GAMMA SHARPNESS SHARP IRIS AUTO POSITION A.P . M3 VIDEO S-VIDEO POWER OFF COMPUTER DVI-D (HDCP) COMPONENT ENTE.
EN-9 ENGLISH Using the r emote contr ol 30˚ 30˚ 30˚ 30˚ 20° 10° 20° 10° 20 ˚ 20 ˚ Operational range of the r emote contr ol • Keep the remote control photo-sensor out of dir ect sunlight or fl uor escent lamp light. • Keep the remote control photo-sensor at least 2 m away fr om fl uorescent lamps.
EN-10 Setting up your pr ojector W A A=B B Setting up the screen Install the screen perpendicularly to the pr ojector . If the screen can not be installed in such a way , adjust the projection angle of the pr ojector .
EN-11 ENGLISH Scr een size and pr ojection distance Refer to the following table to determine the screen size. B A Hd 40 102 20 50 35 89 55 1.4 67 1.7 6.4 16.2 60 152 29 75 52 133 84 2.1 102 2.6 9.6 24.3 80 203 39 100 70 177 113 2.9 137 3.5 12.7 32.4 100 254 49 125 87 221 142 3.
EN-12 Viewing video images A. Connecting the pr ojector to video equipment Preparation: • Make sure that the power of the projector and that of the video equipment ar e turned off.
EN-13 ENGLISH COMPONENT VIDEO IN P B /C B Y P R /C R P B /C B Y P R /C R S-VIDEO IN VIDEO IN 1 2 S-VIDEO IN COMPONENT VIDEO IN VIDEO IN COMPONENT VIDEO IN 1 2 VIDEO IN S-VIDEO IN Connecting to a video player , etc. 1. Connect one end of the optional video cable to the VIDEO IN terminal of the projector .
EN-14 Viewing video images (continued) Connecting to video equipment having a DVI-D terminal Y ou can project high-quality images by connecting the DVI-D terminal of this projector to video equipment having a DVI-D output terminal.
EN-15 ENGLISH C. Pr ojecting images Preparation: • Remove the lens cap. • T ur n on the power of the connected video equipment. 1. Confi rm the POWER indicator lights up r ed.
EN-16 Viewing video images (continued) T o stop pr ojecting: 8. Press the POWER button on the projector or the OFF ( ) button on the remote contr ol. • A confi rmation message is displayed. • T o cancel the procedur e, leave the projector for a while or press the MENU button.
EN-17 ENGLISH Setting the aspect ratio Y ou can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the setting according to the type of the input video signal. How to change the settings: With the remote contr ol: 1.
EN-18 COMPONENT VIDEO IN 2 1 VIDEO IN S-VIDEO IN COMPONENT VIDEO IN 2 1 S-VIDEO IN VIDEO IN Viewing computer images A. Connecting the projector to a computer Preparation: • Make sure that the power of the projector and that of the computer ar e tur ned off.
EN-19 ENGLISH C. Projecting images Preparation: • Remove the lens cap. • T ur n on the power of the connected computer . 1. Confi rm the POWER indicator lights up r ed.
EN-20 AUTO POSITION button When the image supplied from the computer is displaced, carry out the following pr ocedure. 1. Display a bright image (such as a full-screen display of the Recycle Bin window). 2. When the screen saver has been enabled, disable it.
EN-21 ENGLISH Menu operation • Menus are not displayed when no signal is supplied to the projector . * 1: Not available with certain signals. * 2: Available only when the input signal is TV50, TV60, 480i, or 576i. * 3: Available only when the sour ce is VIDEO or S-VIDEO.
EN-22 CONTRAST IMAGE 0 BRIGHTNESS 0 6500K 0 COLOR AUTO 0 SVGA60 AUTO TINT 0 SHARPNESS COLOR TEMP . GAMMA MODE WHITE ENHANCE opt. AV MEMOR Y 1 IMAGE REVERSE OFF AUTO POWER ON OFF AUTO POWER OFF KEYSTONE ON INST ALLATION ON BACK COLOR OFF BLUE SVGA60 SPLASH SCREEN 0 opt.
EN-23 ENGLISH 3. FEA TURE menu ITEM SETTING FUNCTION MENU POSITION 2 options Use to change the position of the menu. CINEMA MODE AUTO The fi lm mode will be automatically activated when a fi lm source signal is input. OFF The fi lm mode will not be activated.
EN-24 Adjusting pr ojected images T o adjust the brightness (CONTRAST and BRIGHTNESS): Y ou can make adjustments for the brightness of the projected image using the menu. (See Page 21 for menu setting.) 1. Display the IMAGE menu. 2. Select CONTRAST or BRIGHTNESS by pressing the or button.
EN-25 ENGLISH T o adjust the tone of white (COLOR TEMP .): Y ou can select a preset color temperature (white tone) using the menu. (See Page 21 for menu setting.) 1. Display the IMAGE menu. 2. Select COLOR TEMP . by pressing the or button. 3. Select your desired color temperature by pr essing the or button.
EN-26 This projector automatically and pr operly projects video signals supplied from the computer . However , some video signals may not be projected, depending on the type of the computer . In such a case, press the AUTO POSITION button. (See Page 20.
EN-27 ENGLISH MENU ACCESS SVGA60 opt. LOCK UNLOCK OK OK A V MEMORY 1 P ASSWORD CONFIRM O K CANCEL MENU ACCESS SVGA60 opt. LOCK UNLOCK OK OK A V MEMORY 1 P ASSWORD O K CANCEL Password function This pro.
EN-28 61 245 310 100 5 COMPONENT VIDEO IN S-VIDEO IN VIDEO IN Asking for installation T o view images projected by the ceiling-mounted projector fr om the front: When the projector is installed on the ceiling, the special ceiling mount bracket, which is separately sold, is requir ed.
EN-29 ENGLISH Using fi lter Filter cover (a) (a) Holder Holder Filter cover Filter Filter cover (a) This projector has a fi lter cover (fi lter) for keeping dust out.
EN-30 Replacing the lamp This projector is equipped with a lamp to pr oject images. This lamp is a consumable. It may bur n out or its brightness may decrease during use. In such cases, r eplace the lamp with a new one as soon as possible. Be sure to replace the lamp with a new lamp separately sold that is exclusive to this projector .
EN-31 ENGLISH (c) (a ) (b) (c) T o replace the lamp: 1. Reverse the projector gently . 2. Loosen the screw (a) using a Phillips screwdriver (+), and remove the lamp cover (b). 3. Loosen the screws (c) using a Phillips screwdriver (+). 4. Pull up the handle.
EN-32 POWER Off Steady red Blinking red / green ST A TUS Off Off Blinking orange Blinking green Steady red Off Steady or Blinking Solution • Connect the power cord to the projector . • Plug the power cord into a wall outlet. • If any objects are blocking the air inlet or outlet grille, remove them and carry out the following.
EN-33 ENGLISH Images are not displayed corr ectly . Problem Projected images ar e shaking. Projected images ar e displaced. Projected images ar e distorted. Projected images ar e dark. Projected images ar e blurred. White dots are seen on projected images.
EN-34 Others Problem The exhaust vents emit warm air . The menu can't be used. “TEMPERA TURE!!” is displayed. The mark appears. The remote contr ol doesn't function easily or at all. The buttons on the control panel (except for the POWER button) don’t function.
EN-35 ENGLISH Indicators POWER Steady green or Steady red Steady red Steady green Steady red Steady red Blinking green/red Blinking green/red ST A TUS Blinking orange Blinking green Blinking green/red Blinking red Steady red Off Steady or Blinking CONDITION Abnormal temperature • The ventilation grilles are clogged with dust or dirt.
EN-36 Specifi cations The specifi cations and outside appearance of the pr ojector are subject to change without prior notice. T ype Model Display T echnology Projection lens Light-source lamp Image.
EN-37 ENGLISH TV60, 480i(525i) - 15.73 59.94 1024 x 576 - TV50, 576i(625i) - 15.63 50.00 1024 x 576 - 1080i 60 (1125i 60) - 33.75 60.00 1024 x 576 - *2 1080i 50 (1125i 50) - 28.13 50.00 1024 x 576 - 480p (525p) - 31.47 59.94 1024 x 576 - *2 576p (625p) - 31.
MITSUBISHI Pr ojector Contact Information Manufactur ed by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-City , Kyoto Japan M I T SUBIS HI ELECTRIC CORPORA T I O N North America MESCA (Mitsubishi Electric Sales Canada Inc.) http://www .mitsubishielectric.
An important point after buying a device Mitsubishi Electronics HC910 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mitsubishi Electronics HC910 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mitsubishi Electronics HC910 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mitsubishi Electronics HC910 you will learn all the available features of the product, as well as information on its operation. The information that you get Mitsubishi Electronics HC910 will certainly help you make a decision on the purchase.
If you already are a holder of Mitsubishi Electronics HC910, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mitsubishi Electronics HC910.
However, one of the most important roles played by the user manual is to help in solving problems with Mitsubishi Electronics HC910. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mitsubishi Electronics HC910 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
