Instruction/ maintenance manual of the product JF-1610 Mimaki
Go to page of 16
Request for daily care Inkjet printer is the precision machine that has highly delicate mechanism. Especially , little dust and paper powder may have ef fect on a head nozzle firing ink, and may not get normal printin g. T o use the inkjet printer in good condition, we recommend the followin g daily care.
2 F or saf e oper a tion Inst allation environment and Notes on cleaning • Use this printer in cle an (less dust) e nvironment. The use of fan and ventila tor mig ht because of dusty environment. They brow dust up dust around the pr inter . • As using UV curing ink, install this printer in a well-ventilated area.
3 In case def ectiv e printing is not r esolv ed In the following cases, clean the suctio n nozzle and cap using the cleaning kit. • The station interior is severely contaminated. • Defective printing is not resolved af ter executing the head cleaning fu nction ( Operation ManualP .
4 Cleaning inside the st ation 1 Press the key in the local mode. 2 Select the [MAINTENANCE] by pressing or key , and press the key . 3 Select the [ST A TION] by pressing or key . 4 Press the key twice. • The carriage moves. 5 Clean the suction nozzle with the exclusive cleaning swab.
In case defective prin ting is not resolved 5 6 Remove dirt of other p art s • Wipe the adher ent ink which got on the cap r ubber or inside the suction n ozzle cover with the exclusive cleaning swab. 7 Press the key . • Initial operation is executed.
6 Cleaning flushing BO X Replacing waste ink abso rption material in the flushing BOX. Cleaning the flushing BOX 1 Open the flushing BOX • The flushing BOXes are both sides of the device. 2 Replace the absorption material in the flushing BOX with a new one .
7 A v oiding dripping of ink dr oplet a t printing Cleaning of the head guard plate Ink droplets caused by drawing may appear on a head guard plate on a bottom face of the carriage. As they can cause stain on media by dripping of ink droplets or drawing trouble, conduct cleaning of the bottom face of the carriage periodically .
Avoiding dripping of in k droplet at printing 8 7 Press the key af ter completing the cleaning • Initial operation is executed. • Press the Key to re turn to L ocal mode.
9 W hen the waste ink tank becomes full W aste ink used for cleaning the heads will gather in the waste ink tank. When the t ank is filled with waste ink, the following error message is displayed . Disposing of waste ink 1 Open the waste ink t ank cover .
10 R e gular maintenance f or w hite ink White ink is easier precip itate th an other inks. • In case without printin g more than two weeks, whit e ink may cause precipitate in ink cartridge or inside of the device. • When the ink is precipitated, nozzle clogging o ccurs and normal drawing can not be obtained.
Regular maintenance for white ink 11 7 Press the key . • White ink discharge operation starts. 8 Shake the white ink cartridge up and down about 10 times slowly . 9 When a screen shown in the right is displayed,Return the white cartridge to the ink st ation.
12 Ho w T o Stor e St orage Of Antifreezing Liquid And W ashing Liquid Be sure to store the Antifreezing liquid and the washing liq uid in a cold an d dark place. S tore the Antifreezing liquid and the washing liquid in a place that is out of the reach of children.
13 MEMO.
14 MEMO.
D201647-1.00-2 1 1 22006.
Printed in Japan © MIMAKI ENGINEERING Co., Ltd. 2006 NH FW : 1.20.
An important point after buying a device Mimaki JF-1610 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mimaki JF-1610 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mimaki JF-1610 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mimaki JF-1610 you will learn all the available features of the product, as well as information on its operation. The information that you get Mimaki JF-1610 will certainly help you make a decision on the purchase.
If you already are a holder of Mimaki JF-1610, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mimaki JF-1610.
However, one of the most important roles played by the user manual is to help in solving problems with Mimaki JF-1610. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mimaki JF-1610 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
