Instruction/ maintenance manual of the product 5303-20 Milwaukee
Go to page of 20
ROTARY HAMMERS MARTEAU ROTATIF MARTILLOS ROTATORIOS OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL. AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE MANUEL DE L'UTILISATEUR.
page 2 W ARNING! READ AND UNDERST AND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SA VE THESE INSTRUCTIONS. WORK AREA ELECTRICAL SAFETY PERSONAL SAFETY TOOL USE AND CARE SERVICE GENERAL SAFETY RULES 4.
page 3 SPECIFIC SAFETY RULES FUNCTIONAL DESCRIPTION 1. Side handle 2. Clamping screw 3. Depth guage 4. Trigger 5. Selector lever 6. Quik-Change spindle 7. Quik-Change chuck 2 4 5 6 7 1 3 1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord.
page 4 Grounded tools require a three wire extension cord. Double insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge exten- sion cord.
page 5 To reduce the risk of injury, always unplug tool before attaching or remov- ing accessories. Use only specifically recom- mended accessories. Others may be hazardous. T OOL ASSEMBL Y W ARNING! Removing the Chuck (Fig. 1) 1. Hold the chuck firmly and pull back sleeve toward direction of arrow (1).
page 6 1. For drilling, turn the selector lever so the arrow on the lever points to the twist drill symbol . 2. For rotary hammering, turn the selector lever so the arrow points to the hammer and twist drill symbol . 3. For hammering only , turn the selector lever so the arrow points to the hammer symbol .
page 7 ACCESSORIES Carrying Case Cat. No. 48-55-5303 Same as provided with the tool. Quick Change Chuck Adapter Cat. No. 42-04-3600 For use with 1/2" Chuck Cat. No. 48-66-1360. Chuck Adapter Cat. No. 48-03-3005 Converts universal drive to 1/2" - 20 thread.
page 8 1. V eillez à ce que laire de travail soit propre et bien éclairée. Le désordre et le manque de lumière favorisent les accidents. 2. Nutilisez pas doutils électriques dans une atmosphère ex- plosive, par exemple en présence de liquides, de gaz ou de poussières inflammables.
page 9 RÈGLES DE SÉCURITÉ SPÉCIFIQUES 2 4 5 6 7 1 3 1. Poignée latérale 2. Vis de fixation 3. Jauge de profondeur 4. Détente 5. Levier sélecteur 6.
page 10 Outils mis à la terre : Outils pourvus dune fiche de cordon à trois dents Les outils marqués « Mise à la terre requise » sont pourvus dun cordon à trois fils dont la fiche a trois dents. La fiche du cordon doit être branchée sur une prise correctement mise à la terre (voir Figure A).
page 11 Pour minimiser les risques de blessures, débranchez toujours loutil avant dy installer des accessoires ou den enlever. Lemploi daccessoires autres que ceux qui sont recommandés pour cet outil peut comporter des risques. A VERTISSMENT! MONT AGE Retrait du mandrin (Fig.
page 12 1. Pour forer en rotation, tournez le levier sélecteur pour que la flèche, apposée sur le levier , pointe versle symbole de forage en rotation . 2. Pour la rotation avec percussion, tournez le levier sélecteur pour que la flèche pointe vers le symbole de rotation-percussion .
page 13 ACCESSOIRES Coffret No. de Catalogue 48-55-5303 Pareil à celui qui accompagne loutil. Quick Change Adaptateur de mandrin No. de Catalogue 42-04-3600 Employé avec mandrin 1/2" (13mm) No de Cat. 48-66-1360. No de Cat. 48-03-3005 No de Cat.
page 14 4. Las herramientas conectadas a tierra deben estar enchufadas en un toma corriente que esté instalado correctamente y conectado a tierra de acuerdo con todos los códigos y ordenanzas vigentes. Nunca retire la clavija de conexión a tierra o modifique el enchufe de ninguna manera.
page 15 REGLAS ESPECIFICAS DE SEGURIDAD 1. Mango lateral 2. T ornillo de sujeción 3. V arilla graduadora de profundidad 4. Gatillo 5. Palanca de selección 6.
page 16 Las herramientas que deben conectarse a tierra cuentan con clavijas de tres patas y requieren que las extensiones que se utilicen con ellas sean también de tres cables. Las herramientas con doble aislamiento y clavijas de dos patas pueden utilizarse indistintamente con extensiones de dos a tres cables.
page 17 ENSAMBLAJE DE LA HERRAMIENT A Retiro del mandril (Fig. 1) Para reducir el riesgo de lesión, desconecte siempre su herramienta antes de colocar o retirar un accesorio. Use solo accesorios recomendados específicamente. Otros pueden ser peligrosos.
page 18 1. Para el perforador, gire la palanca de desplazamiento para que la flecha de la palanca indique la broca helicoidal . 2. Para el martillar con efecto rotatorio, gire la palanca de desplazamiento para que la flecha de la palanca indicque el martillo y la broca helicoi- dal .
page 19 ACCESORIOS Siempre desenchufe la herramienta antes de cambiar los accesorios. Sólo use accesorios específicamente recomendados. Otro tipo de accesorios pueden ser peligrosos. ¡ADVERTENCIA! Estuche metálico Catálogo No. 48-55-5303 Igual a la que se surte con la herramienta.
58-14-5303d4 05/01 Printed in Germany MIL W AUKEE ELECTRIC TOO L CORPORA TION A Company within the Atlas Copco Group 13135 West Lisbon Road Brookfield, Wisconsin, U.
An important point after buying a device Milwaukee 5303-20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Milwaukee 5303-20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Milwaukee 5303-20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Milwaukee 5303-20 you will learn all the available features of the product, as well as information on its operation. The information that you get Milwaukee 5303-20 will certainly help you make a decision on the purchase.
If you already are a holder of Milwaukee 5303-20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Milwaukee 5303-20.
However, one of the most important roles played by the user manual is to help in solving problems with Milwaukee 5303-20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Milwaukee 5303-20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
