Instruction/ maintenance manual of the product miele External Blower Miele
Go to page of 16
Operating and Installation Instructions External Blower DAG 1000 To prevent accidents and appliance damage, read these instructions before installation or use.
2.
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Appliance dimensions . . . . . . . . .
READ AND SAVE THESE INSTRUCTIONS Keep these operating instructions in a safe place and pass them on to any future user. Read these Instructions carefully before installing or using the Ventilation System. ~ This appliance is intended for residential use only.
~ d) Before connecting the appliance to the power supply make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond to prevent appliance damage. If in doubt consult a qualified electrician.
The external blower should only be used in combination with Miele ventilation systems DA 6480 or DA 6490. It must be mounted outside the kitchen on an external wall or on the roof. The external blower is connected to the ventilation system by an exhaust duct and power cord.
a Exhaust air connection b Power cord feed-through (strain relief) Appliance dimensions 7.
Example: Installation on an external wall Example: Installation on a roof The exhaust connection can be connected to either the front or back of the downdraft.
Preparation ^ Remove all packaging. ^ Unscrew and remove the six screws on the blower cover. ^ Unscrew the two screws on the terminal box and remove the cover. Install a UL/CSA-approved cable clamp in the power cord feed-through (strain relief). Locate it so that it is accessible from the blower.
If unsure or unfamiliar with these installation procedures, please contact a qualified contractor. ^ Remove the roof shingles at the installation location. Make the cut such that the upper and side edges of the housing frame sit under the roof covering and the lower edge sits over the roof covering.
, WARNING Danger of toxic fumes. Gas cooking appliances release carbon monoxide that can be harmful or fatal if inhaled. To reduce the risk of fire and to properly exhaust air, the exhaust gases extracted by the hood should be vented outside of the building only.
, WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: All electrical work should be performed by a qualified electrician in strict accordance with national regulations (for USA: ANSI-NFPA 70) and local safety regulations.
Important The ventilation system must be hard wired as follows: Black wire: ....... connect to L1 (live) White wire: ..... connect to N (neutral) Green-yellow wire: . . . connect to GND ......................... (ground) ^ The remote blower must be connected to the ventilation system wiring as described in the manual for DA 6480/6490.
Repairs In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department. ^ When contacting the Technical Service Department, please have the model and serial number of your appliance available. These can be found on the data plate located on the housing above the connection box.
Disposal of packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Please recycle. , DANGER Ensure that any plastic wrappings, bags, etc., are disposed of safely and kept out of the reach of babies and young children.
Alteration rights reserved / 1711 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
An important point after buying a device Miele miele External Blower (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miele miele External Blower yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miele miele External Blower - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miele miele External Blower you will learn all the available features of the product, as well as information on its operation. The information that you get Miele miele External Blower will certainly help you make a decision on the purchase.
If you already are a holder of Miele miele External Blower, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miele miele External Blower.
However, one of the most important roles played by the user manual is to help in solving problems with Miele miele External Blower. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miele miele External Blower along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
