Instruction/ maintenance manual of the product SW2400M Abocom
Go to page of 6
M73 - APO0 7 - 460 24 - Port Fast Ethernet Switch Quick Installatio n Guide.
FCC REGULATORY STATE MENTS FCC Certification , Part15, Class A This equipment has been tested and found to comply with the limits for a class A Digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
- 1 - INTRODUCTION The 24 - Port Fast Ethernet 10/100Mbps N - W ay Switch provides you a flexible, reliable, and affordable solution for an Ethernet network. It comes with twenty - four independent 10BASE - T/100BASE - TX ports. Each port delivers up to 200Mbps throughput, and is able to operate in either half or full - duple x modes.
- 2 - PARTS NAMES AND FUNC TIONS Front Panel : LED Indicators Status LED Color Solid Flashing Power Green Becomes solid green when power is turned on. N/A LINK/ACT Green Successful connection Sending .
- 3 - HARDWARE INSTALLATIO N The switch is considered as a “plug and play” network device and requires no s pecial setup procedures. Connect the power cord and cables correctly and you are ready to go . Switch installation 1. Put the switch on the appropriate location.
- 4 - SPECIFICATION Standards IEEE 802.3 10Base - T Ethernet IEEE 802.3u 100Base - TX Fast Ethernet IEEE802.3x Flow Co ntrol Protocol CSMA/CD Ports Twenty four 10/100Mbps RJ - 45 Ports (support Auto - MDI/MDIX) Switching Scheme Store - and - Forward Flow control Full Duplex: IEEE802.
An important point after buying a device Abocom SW2400M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Abocom SW2400M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Abocom SW2400M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Abocom SW2400M you will learn all the available features of the product, as well as information on its operation. The information that you get Abocom SW2400M will certainly help you make a decision on the purchase.
If you already are a holder of Abocom SW2400M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Abocom SW2400M.
However, one of the most important roles played by the user manual is to help in solving problems with Abocom SW2400M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Abocom SW2400M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
