Instruction/ maintenance manual of the product DA5000D Miele
Go to page of 32
Operating and Installation Instructions Ventilation System DA 5000 D To prevent accidents and machine damage, read these instructions before installation or use.
2.
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Functional description . . . . . . . .
Read these Operating Instructions carefully before installing or using the Ventilation System. This appliance is intended for residential use only. Use the appliance only for its intended purpose. The manufacturer cannot be held responsible for damages caused by improper use of the hood.
~ This equipment is not designed for maritime use or for use in mobile installations such as recreational vehicles or aircraft. However, under certain conditions it may be possible for an installation in these applications. Please contact the nearest Miele dealer or the Miele Technical Service Department with specific requirements.
, WARNING - TO REDUCE THE RISK OF A COOKTOP GREASE FIRE: ~ Never leave surface units unattended at high settings. Boil-overs cause smoking and greasy spillovers may ignite. Heat oils slowly on low or medium settings. ~ Always turn the hood on when cooking at high heat.
Installation ~ , WARNING To reduce the risk of fire only use metal duct work. ~ Any fittings, sealant, or materials used to install the duct work must be made of approved non-flammable materials.
Guide to the appliance 8.
a Covering frame b Chimney c Canopy The canopy opens as soon as the fan is turned on. d Indirect lighting e Control panel The symbols serve as sensor buttons.
The ventilation hood works by air extraction . The air is drawn in and cleaned by the grease filter and directed outside. The hood comes equipped with a non-return flap . This flap automatically closes when the hood is turned off so that no exchange of outside air and room air can occur.
Turning on the fan s ^ Touch the " s " sensor button. The fan switches on to level "2". The sensor buttons " s " and "2" light. The canopy now opens. Selecting the performance level Typically, levels "1" to "3" are sufficient for regular cooking needs.
Delayed shut down "5 m 15" If odors or smoke remain in the kitchen after cooking has been completed, the Delayed Shut Down feature can be selected to allow the hood to continue running for either 5 or 15 minutes.
Indirect lighting Touch the " " sensor button to turn the indirect lighting On/Off. Safety cut-off If the exhaust hood is left unattended for more than 10 hours, the fan automatically turns off. The lighting remains on. ^ Touch the " s " sensor button to turn the fan back on again.
Reprogramming the grease filter timer The grease filter timer is preset to 30 hours. This time can be lengthened or shortened to 20, 30, 40, or 50 hours depending on your cooking habits. – A time of 20 hours should be programmed in kitchens with frequent pan or deep frying.
Before cleaning or servicing the hood, disconnect it from the power supply by either removing the fuse, unplugging it from the outlet, or manually "tripping" the circuit breaker. Cleaning the casing Warning: Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the hood.
Grease filter The reusable metal grease filters remove solid particles from the vented kitchen air (grease, dust, etc) and help keep the exhaust hood clean. At the latest, clean the grease filter when the " l " sensor button lights up. The grease filters should be cleaned ever y3-4 weeks or when the grease filter indicator lights.
Depending on the detergent, cleaning the grease filters in a dishwasher may cause permanent discoloration of the filter surface. Performance of the filter is not affected by this discoloration. ^ After cleaning, the filters can be placed on a towel to air dry.
Changing the halogen light bulbs To change the halogen bulbs, first open the canopy. ^ Touch the " s " sensor button. The fan turns on to level "2". The canopy opens. ^ Press and hold the "2" sensor button for approx. 5 seconds, until the fan turns off.
Changing the fluorescent light bulb Disconnect the exhaust hood from the power supply by either removing the fuse, unplugging it, or manually "tripping" the circuit breaker. To prevent damage to the glass cover and the cooking surface, be sure to securely handle the glass cover.
Repairs In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department. ^ When contacting Technical Service, please quote the model and serial number of your appliance. These are shown on the data plate which is visible on top of the canopy.
Installation Instructions.
22.
Disposal of packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Please recycle. To prevent suffocation of children, ensure that any plastic wrappings, bags, etc.
Installation instructions ^ See the enclosed Installation Instruction sheet. ^ Please read the "Important Safety Instructions" and Installation instructions before installing the hood. Installation accessories 8 screw s8x6 0m m with 8 washers to secure the ceiling plate to the ceiling.
The ceiling mounting plate will support the weight of the hood. This ceiling plate must be attached to rigid structural framing that is supported in its entirety by the ceiling joists, or to the ceiling joists directly. Do not attach the plate directly to the ceiling with anchors, toggle bolts, etc.
All electrical work should be performed by a qualified electrician in strict accordance with national and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer can not be held responsible for unauthorized work.
Total connected load ..........7 7 2W – fan motor ..................6 4 0W – canopy drive .................4W – direct lighting ............2x5 0W – indirect lighting ...........2x 1 4W Power supply voltage ..........1 2 0V Frequency .........
1) Feed-though for the duct work and the power cord Exhaust connection C 7 7 / 8 " (200 mm) The exhaust connection is adjustable. This makes installation possible if the exhaust opening in the ceiling is not centered directly above the cooking surface.
, WARNING Danger of toxic fumes. Gas cooking appliances release carbon monoxide that can be harmful or fatal if inhaled. The exhaust gases extracted by the hood should be vented outside of the building only. Do not vent exhaust air into spaces within walls or ceilings, or in attics, crawl spaces or garages.
– If the exhaust is ducted into an inactive flue, the air must be expelled parallel to the flow direction of the flue. Important If the duct work runs through rooms, ceilings, garages, etc. where temperature variations exist, it may need to be insulated to reduce condensation.
31.
Alteration rights reserved / 0208 For the most updated manual see the Miele web site. M.-Nr. 07 197 930 / 00.
An important point after buying a device Miele DA5000D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miele DA5000D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miele DA5000D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miele DA5000D you will learn all the available features of the product, as well as information on its operation. The information that you get Miele DA5000D will certainly help you make a decision on the purchase.
If you already are a holder of Miele DA5000D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miele DA5000D.
However, one of the most important roles played by the user manual is to help in solving problems with Miele DA5000D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miele DA5000D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
