Instruction/ maintenance manual of the product DA 6290 D Ext Miele
Go to page of 36
Operating and installation instructions Cooker hood DA 6290 D DA 6290 D U DA 6290 D EXT To avoid the risk of accidents or damage to this appliance it is essential to read these instructions before it is installed and used for the first time.
Caring for the environment ..........................................3 Warning and safety instructions .....................................4 Guide to the machine .............................................1 0 Modes of operation ....................
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and should be recycled. Packaging e.g. cling film, polystyrene and plastic wrappings must be kept out of the reach of babies and young children.
This appliance complies with all relevant local and national safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time.
Technical safety ~ Before installation, check the cooker hood for visible signs of damage. Under no circumstances should you install or use a damaged appliance.
~ Do not connect the appliance to the mains electricity supply by a multi-socket unit or an extension lead. These do not guarantee the required safety of the appliance (e.g. danger of overheating). ~ For appliances with an external fan motor fitted (.
In order to ensure safe operation, and to prevent gases given off by the heating appliances from being drawn back into the room when the cooker hood and the heater are in operation simultaneously, an underpressure in the room of 0.04 mbar (4 pa) is the maximum permissible.
Correct use ~ Never use an open flame beneath the cooker hood. To avoid the danger of fire, do not flambé or grill over an open flame. When switched on, the cooker hood could draw flames into the filter. Fat particles drawn into the cooker hood present a fire hazard.
Correct installation ~ Refer to the cooker or hob manufacturer's instructions as to whether a cooker hood may be operated above the cooker/hob. ~ The minimum safety distances between the top of t.
Guide to the machine 10.
a Cover plate b Tower c Canopy d Recirculation grille (...U models only) e Controls f Glass edge feature lighting g Hob lighting h Charcoal filter Special accessory for recirculation mode (.
The cooker hood works with . . . air extraction: (excluding ...U models) The air is drawn in and cleaned by the grease filters and directed outside. The cooker hood is fitted with a non-return flap , which is closed when the cooker hood is switched off.
Con | ctivity This cooker hood is communication enabled. Communication module XKM 2000 DA a , available as an optional extra, enables the operation of the cooker hood to be automatically controlled by the operating status of a Miele electric hob with onset controls.
To switch the fan on s ^ Press the On/Off control s . The fan will come on at power level 2 . The s symbol and the 2 light up. If the cooker hood has been connected to a window contact switch via the Miele DSM 400 control moduleDSM 400, then the fan cannot be switched on if the window is shut.
Run-on option 5 ¢ 15 It is advisable to run the fan for a few minutes after cooking has finished to neutralise any lingering odours in the air, whether you are using air extraction or recirculation mode. The fan can be set to switch off automatically after 5 or 15 minutes.
Glass edge feature lighting ] ^ Press the control for the glass edge feature lighting ] to switch it on. This can be switched on and off independently from the fan or the hob lighting. To change the colour of the glass edge feature lighting £ You can change the colour of the glass edge lighting to any colour you like.
Operating hours counters l The number of hours the appliance has been in operation is stored in memory. When the Grease filter symbol l lights up, the Operating hours counter is signalling that the grease filters need to be cleaned. On ...U models, the Charcoal filter symbol will also light up when the charcoal filter needs to be replaced.
Activating and altering the Charcoal filter operating hours counter (...U models only) The charcoal filter is needed for recirculation mode. On delivery, the Operating hours counter for the charcoal filter is deactivated .
A range of Miele branded cleaning and conditioning products is available to order from Miele (see back page for details) or via the internet at www.miele-shop.com. Before any cleaning or maintenance work is carried out, disconnect the cooker hood from the mains supply.
Important for the controls The controls may suffer discolouration or damage if soiling is left on them for too long. Remove soiling straight away. Observe the General notes on cleaning earlier in this section. Do not use stainless steel cleaning agents on the controls.
Cleaning the grease filters by hand ^ Clean the filters with a soft nylon brush in a mild solution of hot water and a little washing-up liquid. Do not use "neat" washing up liquid. Do not use: – cleaning agents containing descaling agents, – powder cleaners, cream cleaners or abrasive all-purpose cleaners.
Charcoal filter (...U models only) If the cooker hood is connected for recirculation, a charcoal filter must be inserted in addition to the grease filters. This is designed to absorb cooking odours. It is fitted in the canopy above the grease filters.
Changing a halogen lamp ^ Before any cleaning or maintenance work, disconnect the cooker hood from the mains supply. Ensure that – it is switched off at the isolator, or – it is switched off at th.
1) Cut-out for feeding through the exhaust ducting, the mains cable and, with ... EXT models, the connection cable to the external motor In recirculation mode, only the mains cable is required.
Before installation, it is important to read the information given on the following pages as well as the "Appliance dimensions" and the "Warning and Safety instructions" at the beginning of this booklet.
Important: To avoid the danger of toxic fumes, please observe the Warning and Safety instructions. This is especially crucial when using the cooker hood at the same time as another heating appliance which relies on air from the same room. The cooker hood should be installed according to local building regulations.
Important: If the exhaust ducting is to run through rooms, ceiling space etc. where there may be great variations in temperature between the different areas, the problem of condensation will need to be addressed. The exhaust ducting will need to be suitably insulated.
, All electrical work should be undertaken by a suitably qualified and competent person in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous, for which the manufacturer cannot be held liable.
The Miele DSM 400 control module can be used to combine the cooker hood with other components. It enables the following: Connection to a window contact switch If adequate ventilation to the room can o.
Connection to a light switch The control module can be used to switch on the cooker hood lighting and also to dim it, via a light switch in the house. The glass edge feature lighting cannot be switched on and off in this way. Installation The control module is fitted in the tower after the cover plate has been unscrewed from the ceiling.
In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – Your Miele Dealer / Chartered Agent or – The Miele Service Department (see back cover for address). When contacting your Dealer or Miele, please quote the model and serial number of your appliance.
Total connected load* .........3 0 0W – Fan motor* ................2 0 0W – Hob lighting .............4x2 0W – Glass edge feature lighting .2x1 0W Voltage ..................A C2 3 0V Frequency ..................5 0H z Fuse rating ...............
33.
34.
35.
Alteration rights reserved / 2810 M.-Nr. 07 740 590 / 03.
An important point after buying a device Miele DA 6290 D Ext (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miele DA 6290 D Ext yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miele DA 6290 D Ext - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miele DA 6290 D Ext you will learn all the available features of the product, as well as information on its operation. The information that you get Miele DA 6290 D Ext will certainly help you make a decision on the purchase.
If you already are a holder of Miele DA 6290 D Ext, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miele DA 6290 D Ext.
However, one of the most important roles played by the user manual is to help in solving problems with Miele DA 6290 D Ext. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miele DA 6290 D Ext along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
